Magnetic plates - Import export

Suitable magnetic materials Spring-mounted copper plate Teflon-coated twisted cable Mini flat plug

Suitable magnetic materials Spring-mounted copper plate Teflon-coated twisted cable Mini flat plug

Suitable magnetic materials Spring-mounted copper plate Teflon-coated twisted cable Mini flat plug

Very high magnetic retention Spring-mounted copper plate 2m long silicone cable Mini flat plug

Very high magnetic retention Spring-mounted copper plate 2m long silicone cable Mini flat plug

Very high magnetic retention Spring-mounted copper plate 2m long silicone cable Mini flat plug

For removing dust prior to maintenance and repair work, e.g. on magnetic plates, reading heads, audio-visual magnetic tape recording and playback heads, phonograph pick-ups, record turntables or phonograph records For cleaning vacuum sealing surfaces, sealing rings, high-voltage insulators, sample containers etc. For vacuum systems and device groups under clean-room conditions for semiconductor production Cleaning of opto-electronic reading units for bank checks and contactless cleaning of optical devices For maintenance of automated teller machines, quartz clocks or display panels For dedusting precision mechanical parts and assemblies in office machines, copiers, fax machines etc. Advantages and benefits Excellently suited for dedusting, blowing out and blowing off dust and liquids of all kinds Dry, oil-free compressed gas leaves behind no residues Replacement for ultrapure compressed air

Plate-spreading-magnets are used for separating of stacked iron and steel sheets. The sheet separators are laterally grown from the sheet stack, they magnetize the sheets with the same poles, which repel them from each other. Plate-spreading-magnets apply both in automated systems where plates with vacuum or transshipped are magnetic, and the manual work, where the gripping sheet is greatly facilitated by their help. Our Plate-spreading-magnets consist of a reinforced magnet system, which is installed in a stable sheet steel housing.

NMS Precision Sine Tables with built PMNM chipboard impress with very good workmanship and precision. The sine table base is hardened to 60 HRC, burnished and precision ground. The angle is adjusted according the sine principle by using gauge blocks. Our NMS sine tables are used in the EDM, grinding and measuring in the highest precision. Technical Details: — Precision Sine Table with built fine pole chipboard — Holding power 100N/cm2 — Magnetic field height 5mm — Pole plate wearing limit 5mm — plane parallelism 0,005/100mm — Angular accuracy +-0.0013°/+-5sec.

The MCF control units are designed to operate electro-permanent magnet modules. It is available both as a single board for installation in the customer's existing control cabinets and as an IP 54 control cabinet solution. In addition to the FXE lifting magnet modules, other electro-permanent magnet components such as magnet clamping plates or magnet clamping blocks can also be controlled with the MCF, both as a single system (ALNICO) and as a double system (ALNICO/ND). The MCF can be controlled via a machine control, radio remote control, manual pushbutton or other potential-free contacts.

FX-WP lifting magnets are waterproof to 1.5m diving depth. The multi-sealed, super-strong permanent magnet system sits in a fully nickel-plated magnet body. It is a diver. FX lifting magnets in universal design convince by their wide field of application. The FX achieves good results with large air gaps as well as with thin flat and round materials with a compact design and low dead weight. The device is characterized by great robustness and a very good price/performance ratio.

Permanent magnetic chucks type PMNEO are super strong, compact plates for heavy cutting. Parts from about 30x15x6mm can be stretched with max. achievable holding forces. Good holding forces can be achieved even on rough surfaces. Optional pole blocks can be built on the PMNEO. This allows turning up the workpiece so that all sides are freely accessible, can be drilled on the magnetic clamping plate and leaves more space for accumulating chips around the component. This allows long-running HSC milling-pieces never sink into the resulting chips. The chipboard is activated via a removable hex shifter. The PMNEO magnetic clamping plate, in 48mm height, is prepared to integrate reference elements directly into the magnetic chuck, so that no additional spectrum is required underneath the magnet.

FXL magnetic clamping blocks are available in many sizes and designs. They can be manufactured with one or more clamping surfaces and different pole sizes. As with the FXL magnetic clamping plates, they are controlled by an FXL-C control unit; optionally with only one channel or also with several channels in order to be able to control the individual clamping surfaces of a block separately.

Alu Connection Angle for aluminum profiles 40 & 40x80 To connect two aluminum profiles quickly at right angles, direct inserting into the profile slot thanks to correct positioning of the pre-assembled magnet rhombus screws and countersunk nuts; the connection angle can be closed with the cover cap Color/Material: Angle: Aluminum die-cast; alu color lacquered Cover cap: Plastic PA, glass fiber reinforced; Black or gray Countersunk nuts: Zinc plated Magnet rhombus screws: Steel Other surfaces, other colors on request

Permanent magnetic chucks type PMNEO-X are super strong compact chucks for heavy cutting. Parts from about 30x15x6mm are stretched with max. achievable holding forces. Good holding forces can be achieved even on rough surfaces. The chipboard is activated via a removable hex shifter. Structure: — Double neodymium magnet system, steel body — transverse pole pitch 11+4mm — Holding power 150 N / cm2 — Magnetic field height 10mm — Pole plate wearing limit 6mm Recommendation: Super Strong chuck for milling

Permanent Magnetic Circular Chuck Type RNF with neodymium magnet system and low height are used for clamping of small and thin workpieces. Structure: — Neodymium magnet system, steel body, — Max Pole pitch 1,5+0,5mm — Holding power 80N/cm² — Magnetic field height 4mm — Pole plate wearing limit 4mm — Switch travel MAG-ENT-MAG 180° Recommendation: Fine pole circular chuck for small parts

FXL Magnetic Clamping TechnologyThe FXL square pole technology is the result of over 20 years of experience in magnetic clamping technology and combines solutions to the most common customer requirements in the highest quality design. Magnetic poles, fed by Alnico and NDFeB magnets, are anchored in a solid, super-stiff monobloc body by means of a tool steel insert with M8 internal thread. The back of the clamping plate remains flat and can be drilled in at all points - for example, for inserting a zero-point clamping system. For this purpose, the magnet system is coated with highperformance resin in a multi-stage process, which has a high mechanical strength and ensures absolute tightness and perfect electrical insulation. FXL magnetic clamping plates can be controlled with our FXL-C control units or with almost all control units from other leading manufacturers.

The rubber coated pot magnet is made of small neodymium disc magnets, steel plate, and rubber. These disc magnets are embedded in the steel plate, and then the whole steel plate is coated with rubber. The steel plate well concentrate and enlarge the magnetism of these magnet discs. The rubber which covers the magnets and steel plate protects the magnet from corrosion and also well protect the delicate objects that contact pot magnet from scratch. For the Black Rubber coated pot magnet,Also could be classified as threeRubber Covered Neodymium Pot Magnet with External Threaded Stem,Rubber Covered Neodymium Pot Magnet with internal Threaded hole which is protruded, and Rubber Covered Neodymium Pot Magnet with internal Threaded hole which is no protruded.It consists of iron plus strong Neodymium magnet and Black Rubber.

The corrosion resistance of Neodymium magnet is considered poor, surface coating is highly recommended for Neodymium magnets. With the expansion of elevators, wind turbines and permanent motors application, the users need higher requirement on corrosion resistance of Neodymium magnet, as the glue cohesiveness of unplated magnet is much better than plated magnets, also unplated products are better in the security. Now, more and more customers tend to use unplated magnets, upon this condition we have developed ultralow weight loss magnets after the continuous innovation and study. Normally, the weight loss test is over 150mg/cm² in the industry of Neodymium magnet, this will be different for magnets produced from different material formulation and manufacturing process. A lot of our new magnets can reach to 1mg/cm², (Testing condition HAST standard for 168hrs), due to its very low weight loss, the corrosion resistance is excellent

Strong Neodymium Rectangular Pot Magnets with Countersunk Hole Magnets The neodymium pot magnet holder magnet is made of a super strong neodymium magnet encased inside a chrome plated steel cup. The neodymium magnet is bonded inside of the cup with adhesives. At the same time, the steel cup also protects the magnet from being damaged when frequently used. The counter sunk hole on the magnet is provided for easy applications.

Magnetic clamping technology from AMF: safe, reliable and efficient. This innovative technology is based on the force of the magnetic field. This opens up new possibilities that make all surfaces fully accessible for the machining of a workpiece even at constant tension.

These highly accurate Magnet Sinetables are used for grinding work as well as for eroding. It allows for universal clamping of small, medium and large workpieces of any thickness, however, they are best suitable for thin and fine workpieces. The permanent Microsine magnetic clamping plate is preferably used if a flat and light construction is needed during grinding, eroding or milling. A complete, fine transverse pole distribution (steel/brass) guarantees a consistent holding force over the entire width up to the longitudinal sides. This clamping plate can be activated through a hexagonal switch lever. They are available in two versions: either single-pivotable via the longitudinal axis or double-pivotable via the longitudinal and transverse axis. Gauge blocks can be used to set the tilt angle precisely up to 45 °. The magnet Sinetable is suitable for accurate grinding of workpieces with nonparallel surfaces. Individual designs can be created on request.

The electronic reverse polarity controllers are used to turn the magnetic clamping plates on and off and to regulate the holding force in several stages through the affiliated manual operating device. With the D50 controllers, up to 100 poles with the pole size 50x50mm or 50 poles with the pole size 75x75mm can be switched. Furthermore, the D100 controller is needed. The single-channel devices D50 and D100 are used to control Magnaslot and Doublemag. The D50-2 controller is needed to operate the Triplemag magnet modules with additional holding surface. If multiple magnetic clamping plates are controlled individually, the D100-4 controller must be used. Up to 4 clamping plates can be switched separately here. Individual requests can be implemented upon customer request.

The EPFlux magnetic clamping plate has no remanence (residual magnetism) upon deactivation. Highly alloyed and hardened workpieces can be easily loosened from the magnetic clamping plate. Highest grinding precision is achieved, because the plate is not heated up. Not heated up means that there are no expansion and deformation to the workpieces to be processed. The electropermanent magnetic clamping plate is the ideal clamping plate for precision grinding machines. The laminated surface made of brass and steel and the solid steel body guarantee magnetic holding force as well as unique hardness over the entire surface. With the EPFlux magnetic clamping plate, large and small workpieces can be evenly clamped. The magnetizing and demagnetizing occurs through a short power pulse within seconds.

The patented EPM magnetic clamping plates *** Patent-No. EP1874504 *** have a solid steel surface and are therefore significantly more resistant than conventional plates with epoxy resin against hot chips, coolant and other processing influences. The workpiece is clamped on the EPM magnetic clamping plate MAGNASLOT within seconds through an impulse current. This combo plate allows for 5-side processing of your workpieces in only one clamp. This reduces equipping times to a minimum and increases productivity. Conventional machine vices or clamping claws can be used to clamp non-ferrous workpieces. Through the use of pole extensions, which adjust to the workpiece surface, any unevenness on the workpiece can be compensated for and a deformation of the workpiece can be prevented. The magnet field from the MAGNASLOT magnetic clamping plate guarantees low-vibration clamping of your workpieces.

The patented EPM magnetic clamping plates *** Patent-No. EP1874504 *** have a solid steel surface and are therefore significantly more resistant than conventional plates with epoxy resin against hot chips, coolant and other processing influences. The workpiece is clamped on the EPM magnetic clamping plate MAGNASLOT within seconds through an impulse current. This magnetic clamping plate allows for 5-side processing of your workpieces in only one clamp. This reduces equipping times to a minimum and increases productivity. Through the use of pole extensions, which adjust to the workpiece surface, any unevenness on the workpiece can be compensated for and a deformation of the workpiece can be prevented. The magnet field from the MAGNASLOT magnetic clamping plate guarantees low-vibration clamping of your workpieces. This protects the milling spindle as well as your tools, increases process safety and extends the service life.

This highly accurate magnetic clamping plate is used for grinding work as well as for eroding. It allows for universal clamping of small, medium and large workpieces of any thickness, however, they are best suitable for thin and fine workpieces. The permanent Microfine magnetic clamping plate is preferably used if a flat and light construction is needed during grinding, eroding or milling. A complete, fine transverse pole distribution (steel/brass) guarantees a consistent holding force over the entire width up to the longitudinal sides. This clamping plate can be activated through a hexagonal switch lever.

The patented EPM magnetic clamping plates *** Patent-No. EP1874504 *** have a solid steel surface and are therefore significantly more resistant than conventional plates with epoxy resin against hot chips, coolant and other processing influences. The workpiece is clamped on the EPM magnetic clamping plate MAGNASLOT within seconds through an impulse current. This magnetic clamping plate allows for 5-side processing of your workpieces in only one clamp. This reduces equipping times to a minimum and increases productivity. Through the use of pole extensions, which adjust to the workpiece surface, any unevenness on the workpiece can be compensated for and a deformation of the workpiece can be prevented. The magnet field from the MAGNASLOT magnetic clamping plate guarantees low-vibration clamping of your workpieces. This protects the milling spindle as well as your tools, increases process safety and extends the service life.

These permanent magnetic clamping plates Permamax from ASSFALG are suitable for heavy clamp-lifting processing. These Permamax permanent magnetic clamping plates can be used for milling, drilling, grinding and slicing. Considerable holding forces are still achieved on uneven and rough surfaces. They allow for universal clamping of small, medium and large workpieces of any thickness, however, they are best suitable for thick and large workpieces. A complete, wide transverse pole distribution (steel/brass) guarantees consistently high holding force over the entire width up to the longitudinal sides. These clamping plates can be activated through a hexagonal switch lever.