Results for
KAUP GMBH & CO KG
Germany
Construction machines must be flexible in use. Whether in civil engineering, demolition, gardening and landscaping, recycling and waste management or in the forestry and timber industry: construction machines are used in a variety of ways to achieve high profitability and economic efficiency. KAUP offers a wide range of attachments for construction machines - almost every attachment can be combined with a wheel loader, skid steer loader, telescopic loader, wheeled excavator, crawler excavator or any other construction machine.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
Stainless steel processing.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
Mechanical parts.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These are the parts made by aluminum, which was machining by CNC milling machine,there is no surface treatment.
Request for a quoteIGUS® GMBH
Germany
Other information Series E1.10 Inner height hi: 10 mm Inner height Bi: 13 mm Bending radii R: 18 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series E1.17 Inner height hi: 17 mm Inner width Bi: 21 - 44 mm Bending radii R: 28 mm Pitch: 25,5 mm E-Chain®, snap-open along the outer radius E1.18 series Inner height hi: 18 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25.25 mm E-Chain®, snap-open along the outer radius Series E1.20 Inner height hi: 20 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25 mm E-Chain®, snap-open along the outer radius UL94-V2 classification Series E1.10 Inner height hi: 10 mm Inner height Bi: 13 mm Bending radii R: 18 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series E1.17 Inner height hi: 17 mm Inner width Bi: 21 - 44 mm Bending radii R: 28 mm Pitch: 25,5 mm E-Chain®, snap-open along the outer radius E1.18 series Inner height hi: 18 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25.25 mm E-Chain®, snap-open along the outer radius Series E1.20 Inner height hi: 20 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25 mm E-Chain®, snap-open along the outer radius Other information E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Shortening and lengthening of the E-Chain®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E-Chain® Applications Overview E-Chain® in one band Cost-effective solution for large numbers E1: E-Chain® in one band Length of each chain band: 255 mm Can be shortened or lengthened as required through injection-molded, modular chain band Easy snap-open Mounting link for connection of several chain bands Fastening potential by the bore on the chain band Several potential materials Typical industrial sectors and applications General construction machinery Automotive sector Office technology Machine construction Electronic equipment General construction machinery etc. UL94-V2 classification
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Multilift II safety is yet another version of the Multilift II lifting column that is in the pipeline. RK Rose+Krieger has developed this column specially for overhead applications in media technology. Its uses include the correct positioning of projectors and monitors, whereby the lifting column is mounted upside down on the ceiling. A proprietary developed internal safety system prevents any accidental extension of the lifting column.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
The Multilift II clean has now been added to the range. It has been deliberately developed for use in the clean room. A special shroud for the DC motor with brushes of the lifting column means discharge of particles is kept to a minimum. To verify its suitability for use in clean rooms, the Fraunhofer Institute for Manufacturing Engineering and Automation IPA carried out a particle emissions test as per DIN EN ISO 14644-1 and certified the lifting column for use in clean rooms up to a globally valid class 4.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Lifting column Multilift II ESD – discharging voltages via the lifting column In the electronics and semiconductor manufacturing industry, electrostatic discharges can impair the function of components being assembled, or even destroy them. Special ESD assembly workstations are equipped with an antistatic finishing that prevents this from occurring. Until now, lifting columns for the height adjustment of workstations have prevented the safe dissipation of electrostatic discharges by interrupting the electric connection between the table and the foot frame. However, with the Multilift II ESD, RK Rose+Krieger has developed a patented electric height adjustment system that is able to dissipate voltages. This has been realised thanks to the design of the outer and inner profiles which are continuously in contact with one another.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
The Multilift is for continuous height adjustment of tables, equipment, assembly workstations and similar applications. The lifting column can be operated alone or as a pair in parallel. To establish a configuration with absolute synchronous run of several drives (maximal 4) a special drive control is available as synchronous version. Max. travel. 498 mm Max. compressive force. 3000 N Max. tensile force. 1000 N Max. travel speed 8 / 16 mm/s Protection rating IP 20
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
The RKSlimlift looks unflashy and filigree but it is highly loadable. The whole drive unit is placed in the column and is not visible from the outside. Fixing slots in the side walls offer the possibility to attach additional components, e.g. panels, cable channels and braces. Max. travel. 500 mm Max. compressive force. 4000 N Max. tensile force. 2000 N Max. travel speed. 8-32 mm/s Protection rating IP 30
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
The lifting column LAMBDA-Colonne is a telescopic drive which is alone or as a pair (Twin) suitable for lifting and lowering in many possible applications. It can be used for lifting forces of maximal 4,500 N (single) and 9,000 N(Twin) and a total lifting height of 600 mm. Max. travel 600 mm Max. compressive force 4500 N Max. tensile force 4500 N Max. travel speed 8-20 mm/s Protection rating IP 54 | IP 40
Request for a quoteARTHUR WEISSBACH GMBH MASCHINENFABRIK
Germany
We also create the programs ourselves to “breathe life” into machines and robots. After commissioning, we can run extensive performance tests. We strive for clearly structured program sequences. User interfaces should be as self-explanatory as possible and intuitive to operate. It is also important to have a well thought-out concept for user authorizations and parameter management.
Request for a quoteARTHUR WEISSBACH GMBH MASCHINENFABRIK
Germany
This installation includes cable duct construction, cable laying, connection of the control cabinet, components and drives, and grounding in accordance with regulations.
Request for a quoteARTHUR WEISSBACH GMBH MASCHINENFABRIK
Germany
Many devices and machines are still moved by compressed air. The necessary hoses are professionally installed by us.
Request for a quoteARTHUR WEISSBACH GMBH MASCHINENFABRIK
Germany
In our workshops, our experienced team assembles small subassemblies, devices, but also complete production systems. Bellingerstraße 14: 600m² assembly area (with 4 m passage)
Request for a quoteARTHUR WEISSBACH GMBH MASCHINENFABRIK
Germany
We manufacture individual parts and assemblies according to drawings, data or samples. We have a wide range of profiles in different steel grades and aluminum in stock. Our machinery enables us high flexibility.
Request for a quoteARTHUR WEISSBACH GMBH MASCHINENFABRIK
Germany
We manufacture individual parts and assemblies according to drawings, data or samples. We have a wide range of profiles in different steel grades and aluminum in stock. Our machinery enables us high flexibility.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
RK ROSE+KRIEGER GMBH
Germany
Der RK Powerlift mit seinem speziellen Führungskonzept ist Bestandteil einer völlig neuen Hubsäulengeneration. Er zeichnet sich durch die Aufnahme hoher Biege- und Torsionsmomente bei gleichzeitig sehr guter Führungsqualität aus. Durch die optisch sehr ansprechende Formgebung findet der RKPowerlift neben der industriellen Anwendung auch Verwendung bei der Konstruktion von Büromöbeln und im medizinischen Bereichen. Es stehen 3 Design-Ausführungen zur Auswahl. Sie unterscheiden sich lediglich durch die unterschiedliche Formgebung des Außenprofils. Bei der Geometrie des “technic-Designs” wurde besonderer Wert auf die Funktionalität gelegt. Die geraden Kanten und die im Außenprofil integrierte 30er Nutgeometrie ermöglicht eine Anbindung von BLOCAN®-Profilen. Die Hubsäule kann somit problemlos in Konstruktionen eingebunden werden. Typische Einsatzbereiche sind zum Beispiel die Höhenverstellung von Montagetischen und CAD-Arbeitsplätzen.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Adjustment of workstation systems through to complex mechanical engineering systems Lifting columns are the ideal drive elements when a motor setting is required in addition to the stable guidance. The whole technology is integrated and not visible from the outside. These lifting columns do not need any additional coverings. Usually, no special electrical knowledge will be required for the commissioning. Various versions are available as standard for the application in the field of medical technology. Several lifting columns can be combined and synchronised and offer further impressive application possibilities. The MultiControl-units can be linked by a BUS-system and enable the synchronization of maximal 32 lifting columns. The right Lifting column, quickly and easily Use our online product finder and compare lifting columns with each other, receive catalogue and CAD data or request the desired products directly.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
The cable channels feature a cover that can either be removed by lifting it upwards or pivoted open by up to 90° along the length of the channel. Order made easy. In addition to the pivoting cover, installers also value the optional plastic separating strips, which ensure that the individual hoses, signal lines and power cables in the cable channel can be easily separated and well structured. The separating strips also facilitate overhead assembly. When inserted in the cable channel, they prevent the installed cables and channels from falling out. The separating strips can be opened at any time to allow the installation of further cables. They are also available with mounting holes, which is a new feature for aluminium cable channels. These can be very quickly attached to a BLOCAN profile slot by means of a pivoting mounting clip. Here too, the RK Rose+Krieger product philosophy takes hold – connection without drilling! Simply cut the aluminium profiles to length and assemble them.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Fast assembly and perfect organisation Modern machines contain countless power, data and control cables, along with pneumatic hoses. In large systems, the total length of these can quickly add up to several thousand metres. Cable channels make it easier to organise and assemble these cables. The BLOCAN® cable channel system made from anodised aluminium impresses not only with its attractive design, but also through a multitude of well thought out details, which offer the customer considerable added value and greatly facilitate their work. The cable channels in sizes 40, 40x20, 40x80, 80x40 and 80x80 can be supplied as 6 metre bars or cut to length. They are also available with mounting holes, which is a new feature for aluminium cable channels. These can be very quickly attached to a BLOCAN® profile slot by means of a pivoting mounting clip.
Request for a quoteINTERNORM KUNSTSTOFFTECHNIK GMBH
Germany
Coated track plates for use in crawler tracks for construction machinery. The extremely wear-resistant polyurethane Intec E provides the necessary mechanical properties for use in the crawler and protects the floor from the high machine weight. Up to 1.5 m length possible!
Request for a quoteINTERNORM KUNSTSTOFFTECHNIK GMBH
Germany
For forklift trucks and crawler undercarriages we supply undercarriage rollers with polyurethane coating incl. rim. Whether made of steel, aluminum or plastic - we supply you with the complete roller
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Due to the ever increasing automation of manufacturing processes and equipment, the protection of people from sources of danger is growing in importance. The BLOCAN safety guard has a grid design and therefore reduces the effort required from the user in planning, construction and assembly to a minimum. The RK protection system complies with the new Machinery Directive 2006/42/EC. Using special Click & Safe connection elements, the safety guard elements are fixed quickly and securely to pillars made from BLOCAN® aluminium profiles which fulfil the legal requirements for safety devices. Stable protection system with aluminium design Minimal effort required in construction due to standard grid Short assembly times with no mechanical work Clamping profiles allow a wide variety of panel elements to be installed Smooth, easy-clean outer surfaces, attractive design Comprehensive range of accessories Complies with the new EU Machinery Directive 2006/42/EC
Request for a quoteSCHNIEWINDT GMBH & CO. KG
Germany
In the highly innovative machinery and equipment construction area, our heating elements and equipment find mainly application in the tasks of heating, maintaining temperatures or evaporating liquid or gaseous media. The installation of our equipment can take place both in nonhazardous and hazardous areas of zones 1 and 2.
Request for a quoteARTHUR WEISSBACH GMBH MASCHINENFABRIK
Germany
We also create the programs ourselves to “breathe life” into machines and robots. After commissioning, we can run extensive performance tests. Industrial robots are the optimal solution for complex movements or systems with highest flexibility. We integrate and program the appropriate robot such as the Kuka robot and other brands.
Request for a quoteSITEC INDUSTRIETECHNOLOGIE GMBH
Germany
Due to their compact and flexible design, LS series laser machines guarantee an easy entry into the world of laser processing. We offer manual and automated solutions: - Palletising systems - Bar and coil feed systems - Pick-and-place systems - Robots You can realize the following laser material processing with the LS series: - laser machining for welding, clean welding, cutting, drilling, hardening, and structuring - micro processing - integration of CO2 , Nd: YAG, diode, fibre or disk-type lasers and ultra-short pulsed laser Please get furher information at Download.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
With the new height-adjustable monitor floor stand, RK Rose+Krieger is expanding its "RK monitor holder" product range to include a robust, ergonomic standing workstation for industry. The work surface and monitor mounting are supported by a stable triple column system and can be adjusted conveniently by hand to the size of the respective user. The three elegant, slim anodised aluminium columns stand on a black, powder-coated base frame which provides space for an industrial PC and accessories. Cables are elegantly routed in the integrated cable duct on the rear column. The light grey coated work surface (0.3 m2) can be adjusted by hand easily thanks to the tieback support. A spring-loaded locking bolt provides reliable latching. The height adjustment stroke is 400 millimetres. This way the workstation can be adjusted individually to the body size of the user. In addition, the height of the monitor can be adjusted separately and thus guarantees optimum workstation ergonomics.
Request for a quoteResults for
Machine%20construction - Import exportNumber of results
133 ProductsCountries
Company type
Category