Lubricating greases - Import export

to standard SAE 794

steel bushing

For highest contact pressure and high circumferential speed, e.g. for rotary kilns, ball mills, rotary barrel mixers, ball mills, rope winches or friction presses also for guiding elements, slide bars, heavy transport chains and closed wire ropes Lubrication of rotating assemblies of convertors, cranes, crushers and dredges with spray or central lubricating systems Lubrication of heavily loaded gear couplings Advantages and benefits Most suitable for reliable supply of open gears, even at high circumferential speed Very efficient through EP additives in association with a specific combination of solid lubricants and adhesive additives Reliable protection of tooth flanks, even at high temperatures and with extended relubrication time Good pressure resistance of the lubricating film, excellent wear protection The film is not embrittling and aging. Without bitumen, solvent, does not contain heavy metals

Lubrication of roller and plain bearings as well as of threaded spindles, gearwheels, worms and similar components Lubrication of spindle bearings in machine tools Advantages and benefits Allows high machine service lives due to low-wear operation and low lubrication frequencies Outstanding resistance in a wide temperature range, at high stresses and surface slide speeds as well as at vibrations Resistant to cold and hot water Excellent wear protection For highest effectiveness carefully clean the lubrication point, for example with OKS 2610/OKS 2611 universal cleaner. Before filling a bearing for first time, remove anti-corrosion agent. Fill the bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing, high-speed bearings (DN value above 400,000) up to about 1/4. Low-speed bearings (DN value below 50,000) and their housings should be filled completely.

grease lubricated

grease lubricated

grease lubricated

grease lubricated

Lubrication of parts subject to high levels of stress such as plain, roller and rod-end bearings, spindles and guideways Advantages and benefits Highly suitable for high-stressed lubrication points Highly effective caused by optimal combination of components Saving of maintenance and lubrication costs by reducing downtimes and corrective maintenance Reduction of down times due to wearFor highest effectiveness, carefully clean the lubrication point, for example with OKS 2610 or OKS 2611 universal cleaner. Before filling for first time, remove anticorrosion agent. Fill bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing. Low-speed bearings (DN value below 50 000) and their housings should be filled completely. The bearing and machine manufacturer´s instructions should be observed. Subsequent lubrication at the lubrication nipples by grease gun or by automatic lubrication system.

Lubrication of rolling and friction bearings, as well as other machine elements at medium rotating speeds or sliding speeds in a broad temperature range For example, electric motors, drives, control systems and telecommunication and navigation systems under arctic conditions, Bowden cables and brake mechanisms in aircraft, sliding parts in shock-freezing systems etc. Lubricating grease for plastic/plastic and plastic/metal pairs and elastomers For plastic sliding coatings in bridge supports and as a parting agent in plastics processing Advantages and benefits Highly effective due to optimum formula Broad temperature range with a wide range of possible uses Excellently suited for lubricating plastics and elastomers Lubricating grease resistant to ageing, especially at low temperatures

▪ Contactless application ▪ Suitable for lubricants, greases, anaerobic and other adhesives ▪ Materials with low as well as high viscosity applicable ▪ vipro-SPIN feeded by ViscoTec 3RD3 or 3RD4 dispenser ▪ Four different spinning heads available ▪ Continuous spraying ▪ Easy integrateable to different control unit systems due to open end cable

Special grease for the long-term lubrication of ball and plain bearings where electrical charge is possible, e.g. in electric engines, foil- stretching and foil-printing machines, etc. Advantages and benefits Long-term lubrication grease with a wide temperature range and good corrosion protection The special lubricating concept makes sure that electrostatic charges in roller bearing applications are destaticized through the grease, so that local discharges are avoided Proven especially for the lubrication of roller bearings below 1 ampere

Grease lubrication of rolling and plain bearings subject to very heavy loading Protection of bearings against harmful impurities Protection against corrosion, maintenance of lubricating effect, even when exposed to large quantities of water Advantages and benefits Excellently suited as a high-performance lubricating grease due to special EP properties and solid lubricants The high base oil viscosity, with a stable soap basis even when exposed to water, results in a particular suitability for heavily loaded, slow-running bearings even with impact loading Good emergency running properties due to solid lubricants

Lubrication of sliding points between metals, plastics and elastomers to each other and with each other at low sliding speeds with an increased sealing effect, e.g. lubrication of O-rings in pneumatic systems of brake systems Advantages and benefits Highly effective due to an optimum of highly adhesive silicone grease formula Broad range of uses outside normal grease performance range Broadband lubricating grease with good sealing properties

GMN ball bearing freewheel clutch units are suitable for low and medium torque requirements. The FK, FKN and FKNN series have an integrated ball bearing and are also optionally available pre-lubricated with grease and seal rings (2RS models). GMN ball bearing freewheel clutch units without seals are suitable for either oil or grease lubrication. All GMN ball bearing freewheel clutch units can be used as indexing clutches, backstops or as overrunning clutches.

Grease lubrication of unsheltered parts subject to heavy loading and/or impacts, such as friction, rolling and pivoting bearings, splined shafts, knockout spindles, threaded spindles and sliding surfaces of all kinds For harsh operating conditions Advantages and benefits Excellently suited as a safety lubricating grease in mixed friction sector with especially good wear protection Effectively protects against corrosion Contains Mox-active to improve performance For best results clean the lubricating point carefully. Clean with solvents like OKS 2610/OKS 2611 Universal Cleaner. Remove the corrosion protection ahead of the initial filling. Fill the bearings in a way that all the functional surfaces for sure get the grease. Slow moving bearings(DN-value < 50,000) should be filled completely, normal moving bearings should be filled to 1/3 of the free inner housing space. Observe the instructions of the bearing or machine manufacturer. Relubrication with a grease gun on to the grease

Grease lubrication of plain and rolling bearings at high temperatures, e.g. in painting and drying ovens, converters, pouring ladles, heating systems, hot-air fans, charging cranes, vulcanising systems and electric motors Advantages and benefits Excellently suited for long-term lubrication of grease lubricating points subject to high-temperature loading Highly effective due to optimum solid lubricant formula Broad range of uses above normal grease performance areas Reduced maintenance and lubricant costs due to possible safety lubrication Drip-free hot bearing grease for long-term and safety lubrication in a broad temperature range For best results clean the lubricating point carefully. Clean with solvents like OKS 2610/OKS 2611 Universal Cleaner. Remove the corrosion protection ahead of the initial filling. Fill the bearings in a way that all the functional surfaces for sure get the grease.

Grease lubrication of plain and rolling bearings in high-temperature range, where a mineral oil based grease cannot be used, e.g. on hot-air blowers and fans, autoclaves, drying ovens or systems in steelworks and foundries Advantages and benefits Drip-free hot bearing grease for a broad temperature range with high oxidations stability and moisture resistance Excellently suited for long-term lubrication of grease lubricating points subject to high-temperature loading Highly effective due to optimum high-performance formula Broad range of uses outside normal grease performance areas

Grease lubrication of friction and rolling bearings at low operating temperatures Grease lubrication of friction and rolling bearings at high speeds Grease lubrication of bearings with low coasting moments or low bearing play Advantages and benefits NSF H1 registered Low-viscosity, fully synthetic base oil ensures the functionality of the lubricating film up to -70°C Very good conveying capability in central lubricating systems also at low temperatures Clean the surfaces for optimal effect. Before filling for first time, remove anti-corrosion agent. Fill the bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing

Lubrication of friction and rolling bearings of all kinds at all permissible speeds and subject to high pressure loads, in particular of heavily loaded rolling and taper roller bearings, e.g. on rolling stands, hot and cold shearing systems, sliding blocks and spindles Advantages and benefits Excellently suited for long-term lubrication of grease lubricating points subject to heavy loading Highly effective due to outstanding EP additives and high resistance to water

For lubrication points of all kinds as slide ways, spindles, geared parts of the electronic, precision engineering and optical equipment, temporarily or permanently exposed to extreme low temperatures like in arctic climates or cold storages Roller bearing lubrication of high-speed bearings, e.g. spindle bearings, miniature or precision bearings in machine-tools or textile machines, measuring equipment, electric motors of control technology and precision mechanics Advantages and benefits Dynamic light noise proofed long-term lubrication grease Best use at arctic conditions and very high speed High efficiency through optimal formulation Multifunctional application beside the regular range of performance for greases Efficient through economical application No nameable change of consistency at low temperatures or high speeds and accordingly temperatures

For our bearing assemblies and linear systems, we use high-quality lubricants as standard that are suitable for most applications. Special operating conditions require special lubricants. Standard and special greases are available in the respective container sizes from us as accessories. They can be used when our bearing elements are used for the first time or for relubricating slewing rings.

Wrapped composite sliding bearing with lubrication pockets/ copper-plated steel & AlSn20Cu | Low-maintenance | DIN 1494 / ISO 3547 For high sliding speeds, optimum sliding behaviour with good lubricant supply. BIV-MET®/A is a composite sliding bearing requiring maintenance; oil or grease lubrication is needed. For technical details, please visit the product page on our website!

Wrapped composite sliding bearing steel / POM | low-maintenance | With lubrication pockets | DIN 1494 / ISO 3547 POM-MET® is a low-maintenance composite sliding bearing with a POM coating. Initial lubrication is required. Both oil or grease lubrication are possible. Due to the lubricant pockets, relubrication intervals are significantly reduced! Suitable for all sliding movements, good load capacity, robust and resistant to dirt. Suitable for grease or oil lubrication and all kinds of movement, good load capacity, robust and insensible to dirt. For technical details, please visit the product page on our website!

GMN insert elements are available in many different diameters. The FE 400 Z, FE 400 Z2 and FE 8000 Z series are equipped with a tension spring. The FE 400 M series has a meander spring. GMN insert elements are designed for installation on hardened and ground connecting parts. They are suitable for either oil or grease lubrication. All GMN insert elements can be used as indexing clutches, backstops or as overrunning clutches.

GMN high-performance spindles with an integrated motor are designed for those applications and relevant installation situations in close collaboration with our customers. They are available as needed with a synchronous or asynchronous motor, for manual - HGS series - or automatic tool change - HGC, HGT series - and with oil-air or grease lubrication. Additional options are, for example, an AE sensor, vibration sensor or an automatic balancing system.

GMN high-speed spindles of the HC, HCS, UHS, HCT series are an essential component of highly-effective machining of various materials. Whether aluminum, steel or titanium, these spindles are optimally designed for all machining tasks which require performance, torque and speed. Using an oil-air or grease permanent lubrication, the spindle bearings operate in a secure fashion.

Universally applicable Largely biodegradable Silicone-free CO2 propellant Water-displacing Provides a protective coating Saltwater-resistant Super Lube is suitable for many materials and material compounds, such as iron, wood, non-ferrous metals, synthetics, leather, etc. Get your car ready in time for winter: Super Lube prevents car locks and doors from freezing. Super Lube – 17 products in one can: Aluminium cleaner and care product, greaser and lubricant for antennae, interior room spray, adhesive lubricant, high pressure lubricant, fan belt spray, contact and electro protection agent, assembly compound, MOS-2 lubricating and dissolving spray, rust and dirt remover, acid-resistant lubricant and terminal grease, locks and cylinder locks lubricant and line grease lubricant with PTFE, silicone spray, white greases and compounds, chain spray, Bowden cable spray. Fields of application The automotive industry, construction machinery, agricultural...

Solid sintered bronze bearing | Maintenance-free | With uniformly embedded solid lubricant in the bronze or iron matrix GAP-MET®/M is a maintenance-free plain bearing. However, oil or grease lubrication is possible. High load capacity and strength for all slow movement types, suitable for contaminated environments, no moisture absorption, good chemical resistance and good temperature resistance. The parts are mechanically reworkable. For technical details, please visit the product page on our website!