Results for
FRANKE GMBH
Germany
For our bearing assemblies and linear systems, we use high-quality lubricants as standard that are suitable for most applications. Special operating conditions require special lubricants. Standard and special greases are available in the respective container sizes from us as accessories. They can be used when our bearing elements are used for the first time or for relubricating slewing rings.
Request for a quoteINOX VERTRIEBS GMBH
Germany
INOX is an independent German lubricant manufacturer for customers in the automotive and industrial sector. We deliver customized high performance lubricants to oil companies, brand owners and distributors with their own company labels. Our highly technological semi-automatic and fully automatic filling lines were developed as special purpose machines specifically for these requirements. As one of our services we provide assistance and specific knowledge to well-known companies in the petroleum industry, to retailers and original equipment manufacturers (OEMs) with after-sales service.
Request for a quoteJOST CHEMICALS GMBH
Germany
grease 200 is a H1 registred, transparent, soft grease. It is water- and steam-resistant and stable to oxidation and ageing. The operating temperature range of grease 200 is between -20°C and +130°C, but should preferably be used to a max. temperature of 100°C. Above this temperature the viscosity will slightly drop. grease 200 is a cost-effective lubricant.
Request for a quoteJOST CHEMICALS GMBH
Germany
grease 300 is a H1 registred, high-temperature, high-performance ejector grease with a soft consistency. It is free of solids. So narrow clearances can be lubricated without any problems. Because of the high adhesive strength of grease 300, ejector-pins of injection moulds can be lubricated without facing the risk of polluted parts. The maximum operating temperature of grease 300 is 300°C.
Request for a quoteJOST CHEMICALS GMBH
Germany
grease 800 is a H1 registred, high-performance grease with a soft consistency. The thickener of grease 800 is PTFE. Therefore, it provides excellent dry-running properties. The operating temperature range of grease 800 is between -30°C and +280°C, but should preferably be used at temperatures above 70°C, because from this point on the lubricant provides the best performance.
Request for a quoteJOST CHEMICALS GMBH
Germany
Super Grease is a H1 registred high performance grease spray. The lubricant is dissolved in a fast evaporating solvent. During the application of Super Grease, its viscosity changes from water- to honey-like. At first Super Grease reacts as penetrating oil and after a few seconds it changes into a skid-resistant, high-performance grease, with a high adhesive strength. The thickener of Super Grease is PTFE. Therefore, it provides excellent dry-running properties. The operating temperature range of Super Grease is -30°C up to +200°C.
Request for a quoteHPM TECHNOLOGIE GMBH
Germany
Our high-performance machining oil SENTOS V-LR3 has a somewhat higher lubricity compared to our SURVOS products. This product also consists of volatile components that evaporate down to a lubrication residue of 3%. All components are approved according to USA-FDA §178.3910 as surface residues for the manufacture of food packaging. This makes our SENTOS optimally suited as a lubricant and drawing agent for punching and deep drawing (even with high contact pressures), for cutting and perforation of sheets (aluminium, steel, copper, brass, zinc-plated), including transformer and electric sheets, as well as for painted and coated sheets in particular. In addition, our SENTOS is especially well suited for cold profiling, bending and embossing, as a cooling lubricant for sawing, drilling, milling and engraving as well as a lubricant for cutting non-metallic materials.
Request for a quoteHPM TECHNOLOGIE GMBH
Germany
Universal spray head where the spray quantity is set via a scaled measuring drum. This makes it possible to check the set quantities at any time. Any changes are immediately visible and can be corrected. With constant parameters (fluid, spray and fluid pressure), the quantity is always 100% reproducible. The supply line exits at an angle of 90° to the spray jet. Our LEO spray head is available in two variants: The LEOR spray head has an M5 thread for fastening to a customer-side mount. The LEOB spray head has a ball joint. This allows it to be attached flexibly and precisely with the flexible HPM Technologie mounts. Low pressure range from 0,5 - 2,5 bar Air consumption from 2 -5,5 /min Viscosity range from 2.300mm²/s (20°C) - 500 mm²/s (40°C) Spray with nearly round cone full of about 15 ° Available in the nozzle lengths 30, 70, 105, 130 und 155 mm
Request for a quoteHPM TECHNOLOGIE GMBH
Germany
The brand-new PPJ system impresses not only with its well-conceived components and size but also with its innovative form. In this system, we have combined our decades of experience in an attractive design. The independent regulation of fluid and spray air pressure achieves excellent results even with higher-viscosity media. Available for up to 6 spray heads and in versions with 1, 3 and 5 litres, this system has a very compact design and therefore takes up extremely little space when installed. The system is suitable for the initial equipment of machines as well as for subsequent installation. The PPJ system can be used with our spray heads (starting on p. 20) and the JOP drip-feed dosing device (p. 30) up to a maximum viscosity of 2300 mm²/s at 20 °C or 500 mm²/s at 40 °C (except for substances containing paint, resin and glue).
Request for a quoteHPM TECHNOLOGIE GMBH
Germany
Series MDJ Application possibilities and advantages of the MDJ series The advantage of our MDJ systems is that they are independent of viscosity. In addition, the MDJ system is easier to use due to the separate regulation of the air and fluid pressure. Suitable for all fluids that reach a maximum viscosity of 2300 mm²/s at 20 °C or 500 mm²/s at 40 °C (except for substances containing paint, resin and glue). Module for wall installation consisting of a stainless steel pressure tank with 10 or 15 litres, fluid filter (100...120 my), as well as one or more valve modules and a service unit. Due to the possibility of regulating the fluid pressure independently of the spray pressure, our MDJ system is also very well suited for larger transfer, profiling or automation systems with a large number of spraying points. We will be happy to plan a special system with you. Simply contact us.
Request for a quoteHPM TECHNOLOGIE GMBH
Germany
Application possibilities and advantages of the TCJ series If you use a fluid or fluids up to a viscosity of max. 100 mm²/s at 20 °C (except for substances containing paint, resin and glue), then our self-priming systems of the TCJ series are just the right thing for you. The advantage of our TCJ system is that it reduces and prevents dirt ingress into your process. Our 10- and 25-litre systems are adapted to commercially available fluid containers. This allows the container to be directly changed — without cumbersome refilling. The result is no dirt in the container and thus a process that continues to function optimally. Connection possibilities for up to six spray heads. Container available in 2,5 to 20 Liter Optional Level control Control via 24 V DC electrical valves as standard. Pneumatic and other electrical valve voltages on request.
Request for a quoteHPM TECHNOLOGIE GMBH
Germany
Our absolute classic. Probably the most frequently sold spray head in the world. Universal spray head, very robust and suitable for all applications. Due to the large channel diameters and a direct supply, our HTR spray head can also be used with especially critical and viscous media. The quantity is dosed in the front at the nozzle. Our HTR spray head is available in two variants: The HTRR spray head has an M6 thread for fastening to a customer-side mount. The HTRB spray head has a ball joint. This allows it to be attached flexibly and precisely with the flexible HPM Technologie mounts. All of our spray heads are available individually or as a spray head group. The spray head group contains air and fluid connections (check valve) for the distributor. An optional check valve mounted on the spray head prevents the fluid from dripping out through the spray head in the case of a critical line route or critical positioning
Request for a quoteHPM TECHNOLOGIE GMBH
Germany
Our SAMNOS fluids are almost 100% biologically degradable fluids that do not require labelling. No work-related dermatological illnesses have occurred to our knowledge. The lubricity is very high, and it has a very effective cooling ability. All SAMNOS fluids form a thin, water-soluble film that protects against corrosion. SAMNOS Standard is a processing medium that evaporates up to 97% residue-free. This fluid can be used with all materials, including plastic. Due to the special cooling properties of the fluid, SAMNOS Standard is used especially with very demanding machining processes.
Request for a quoteHPM TECHNOLOGIE GMBH
Germany
Our SAMNOS fluids are almost 100% biologically degradable fluids that do not require labelling. No work-related dermatological illnesses have occurred to our knowledge. The lubricity is very high, and it has a very effective cooling ability. All SAMNOS fluids form a thin, water-soluble film that protects against corrosion. SAMNOS ZM-22W is a universal cooling lubricant that can be used with almost all materials and machining processes and evaporates up to 95% residue-free.
Request for a quoteHPM TECHNOLOGIE GMBH
Germany
SURVOS products are optimally suited to sheet metal forming, machining and assembly technology. Our SURVOS has also been successfully used in cutting and punching aluminium sheets, steel sheets, copper and brass sheets, in cold profiling, bending, embossing, sawing and drilling aluminium profiles for decades. SURVOS detaches from a workpiece with 100% residue-free evaporation even when the parts lie flat on top of each other. Only selected raw materials of the highest purity are used for SURVOS. One of the main components is dearomatized hydrocarbons of the highest quality. As a metal processing medium that evaporates residue-free, SURVOS combines optimum lubricity with favourable values for evaporation speed, toxicology and environmental protection. All SURVOS products are classified according to REACH (EC 1907/ 2006) and do not contain any substance that is on the list of candidates for SOVHC.
Request for a quoteHPM TECHNOLOGIE GMBH
Germany
Small but powerful. Our power pack The smallest spray head available in the HPM standard range. Suitable for tight installation situations. The quantity is set on the back. The desired quantity can be reliably set using safety bolts. The supply line exits at an angle of 90° to the spray jet. Our PSM spray head is available in two variants: The PSMR spray head has an M5 thread for fastening to a customer-side mount. The PSMB spray head has a ball joint. This allows it to be attached flexibly and precisely with the flexible HPM Technologie mounts
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
HPM TECHNOLOGIE GMBH
Germany
SURVOS products are optimally suited to sheet metal forming, machining and assembly technology. Our SURVOS has also been successfully used in cutting and punching aluminium sheets, steel sheets, copper and brass sheets, in cold profiling, bending, embossing, sawing and drilling aluminium profiles for decades. SURVOS – 100% residue-free* evaporating metal processing oil. SURVOS Rapid D evaporates considerably faster than the "Standard" formulation (with a somewhat lower lubricity). SURVOS Rapid D impresses, however, with short evaporation times and is 100% residue-free*. The fluid is used in particular when operations follow each other in a short cycle sequence and no residue is allowed to remain. * According to the specifications of the DAB (German Pharmacopoeia), an evaporation residue of < 0.01% is considered to be residue-free.
Request for a quoteTRIBO-CHEMIE GMBH
Germany
Graphite-free lubricant for the forging of aluminium Temperature Range 130 °C to 380 °C Properties and Advantages • improved cleanliness of work environment (graphite-free) • reduced wear on tool surface due to the forming of an effective release film • good release of forgings • formation of a pressure resistant lubricating film • forgings can be painted and powder coated, downstream processes are trouble-free • alternative to graphite containing products
Request for a quotePULSARLUBE GMBH
Germany
The Pulsarlube MSP electromechanical automatic grease lubricator is designed to operate in synchronization with the equipment on which it is installed. As long as the equipment is operating, the Pulsarlube MSP will dispense the preset amount of lubricant so that any loss or waste of lubricant can be prevented. Ideally suited for applications where lubrication is to take place only when the machine is in operation and where a feedback signal to PLC is required Any over-lubrication issue can be prevented No needs to change the internal battery pack for up to 5 years (externally powered) Cost effecitve by use of replaceable grease pouch only Selectable grease pouch : 60, 125, 250, 500ml Available dispensing periods: 60ml : 1~12 months 125,250ml : 1,2,3,6,12 and H month 500ml : 1,2,4,6,12,18,24 and H month
Request for a quotePULSARLUBE GMBH
Germany
The Pulsarlube OL500 oil lubricator consists of the main body with a vertical self-priming pump controlled by the microprocessor, a 500ml oil reservoir, and a battery pack. This product has the ability to precisely deliver very small amounts of lubricant with selectable intermittent dispensing cycle. An economical solution compared to messy manual lubrication or a high cost, fully automated lube system. A complete oil lubrication system with optional accessories and remote installation kits. Easy to check the operating status. Easily adjustable oil volume by the mode setting. Easy to refill and spill-proof oil reservoir. Compatible oil reservoir with most synthetic oils and chemicals.
Request for a quotePULSARLUBE GMBH
Germany
Pulsarlube Mi automatic grease lubricator is innovatively designed to detect the operation of industrial rotational machinery by using a piezoelectric vibration sensor. This piezoelectric sensor is composed of a ceramic strain transducer attached to a metallic proof mass in order to respond to an externally imposed acceleration. Fully automated lube system Clear reservoir that is easy to see the remaining grease inside No need for external electric wiring to a motor or other power supplies Possible to choose proper high performance lubricants according to specific environments Reliable constant, precise & predictable lubricant supply Low maintenance cost, competitive with manual lubrication
Request for a quotePULSARLUBE GMBH
Germany
The Pulsarlube PLC electromechanical automatic grease lubricator is specially designed to be fully integrated as well as be synchronized to a PLC system .Kindly offers two types of PLC lubricator, Month and Interval type for wider range of usage. Can remotely send a dispensing signal to the lubricator when lubrication is needed Precise lubrication on demand Can lubricate up to 8 lube points (Max. 6m) High output pressure of 30~60kgf/cm² (425~850psi) User can control dispensing rate based on hours of operation of equipment(INTERVAL TYPE)
Request for a quotePULSARLUBE GMBH
Germany
The Pulsarlube M electromechanical automatic grease lubricator is primarily designed to compensate the performance of conventional gas type automatic grease lubricator. It also offers superior advantages in cost competitiveness and user friendliness. Cost effective by use of replaceable grease pouch and battery pack (Service pack) High output pressure (30 - 60kg/cm² (425 - 850 psi)) Remote and multi-point installation up to 8 points, max 6 meters (20 ft) per point Selectable grease pouch: 60, 125 and 250ml Durable and reliable engineering Simple, user friendly programming Easy-to-read user friendly LCD screen Available dispensing periods: 1, 2, 3, 6, 12 and Half (H) months
Request for a quotePULSARLUBE GMBH
Germany
The Pulsarlube MS electromechanical automatic grease lubricator is designed to operate in synchronization with the equipment on which it is installed. As long as the equipment is operating, the Pulsarlube MS will dispense the preset amount of lubricant so that any loss or waste of lubricant can be prevented. The Pulsarlube MS electromechanical automatic grease lubricator is designed to operate in synchronization with the equipment on which it is installed. As long as the equipment is operating, the Pulsarlube MS will dispense the preset amount of lubricant so that any loss or waste of lubricant can be prevented. If the equipment is not operating, then the Pulsarlube MS goes into "stand-by mode" and does not dispense lubricant until the machine goes back into operation.
Request for a quotePULSARLUBE GMBH
Germany
The Pulsarlube M500, newly developed automatic grease lubricator, is primarily designed to ensure reliable lubrication of larger bearings (i.e. >102mm (4") O.D) commonly found in industries such as mining, cement, and steel. Large 500ml grease capacity with long operation period up to 24 months. Wide operating temperature range with optional Lithium battery pack. 'Automatic Lockout system' preventing any possible accidental/unauthorized re-programming of the unit after it has been set. Easy to replace grease and battery pack. 8 variable dispensing periods from Half to 24 months in a single unit. High output pressure (average 30kg/cm²/(425 psi) enables multi point lubrication up to 8 points and/or remote installation up to 6 meters (20 ft) per point .
Request for a quotePULSARLUBE GMBH
Germany
The Pulsarlube EX electromechanical automatic grease lubricator is UL, ATEX certified. It is primarily designed to meet the following requirements: UL79, Power-Operated pumps for Petroleum dispensing products, 8th Edition ANSI/ISA-12.12.01-2000, Nonincendive electrical equipment for use in Class I , Division 2 , Groups C and D Hazardous locations. Applicable to electric motors as well as other types of equipment subject to hazardous location classification. Tested by Underwriter Laboratories and meets the following requirements: UL79, Power-Operated pumps for Petroleum dispensing products. Certification: Class I, Div. 2, Groups C and D. Where flammable gasses or vapors are present in the air in quantities sufficient to produce explosive or ignitable mixtures. Cost effective by use of replaceable grease pouch and battery pack (Service pack). Selectable grease pouch: 125, 250ml. Available dispensing periods: 1, 2, 3, 6, 12 and Half (H) months.
Request for a quotePULSARLUBE GMBH
Germany
The Pulsarlube V automatic grease lubricator operates based on the proven technology of electrochemical reaction which generates inert Nitrogen (N2) gas through the systematic use of an electrolyte and electrical energy. Cost effective by reduced inventory Easy to install and simple to operate using one-touch switch Microprocessor controlled accurate dispensing rate Large user friendly LCD Available dispensing periods: 1, 2, 3, 6, 12 months and Purge (P) Immediate grease dispensing available for testing and installation by using Purge (P) mode Transparent container for easy visual inspection of lubricant levels
Request for a quoteResults for
Lubricant - Import exportNumber of results
147 ProductsCountries
Company type
Category