Low cost - Import export

25 dimensions - ex stock iglidur® Plain bearing - Product overview New as standard range: iglidur® J4 is the new low-cost material for long lifetimes for low to medium loads. Zero lubrication, zero maintenance Low-cost-material for large volumes Low coefficients of friction Media resistant Lowest humidity absorption Bearings made of iglidur® J4 in a satellite receiving unit material data: iglidur® J4 Density 1,48 g/cm 3 Colour Gray Max. moisture absorption at 23°C and 50% r.h.: 0,3 weight-% Max. water absorption 1,3 weight-% Upper long-term application temperature 90°C Upper short-term application temperature 120°C Lower application temperature -50°C Bending E-module 2.350 MPa Max. surface pressure 35 MPa Surface resistance >10 12Ω 25 dimensions - ex stock

iglidur® D: low cost material with silicon Low-cost-material with low coefficients of friction and good wear resistance at low loads. iglidur® D is available as cylindrical bearings and plain bearings with flange. Low coefficients of friction at high speeds For low loads Very cost-effective Vibration-damping Lowest humidity absorption

Other information Series 14040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14240 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 14550 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 15050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 15250 Inner height hi: 86 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 14340 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 14650 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 15150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 15350 Inner height hi: 86 mm Inner widths Bi: 50 - 400 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series R18840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R19050 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 600 mm Pitch: 91 mm E-Tube, swivel lid Series R19850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series Special design Electrically conductive ESD/ATEX versions on request "Mounted on the side" unsupported application possible High torsionalstiffness Other information Series 14040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14240 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 14550 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 15050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 15250 Inner height hi: 86 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 14340 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 14650 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 15150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 15350 Inner height hi: 86 mm Inner widths Bi: 50 - 400 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series R18840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R19050 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 600 mm Pitch: 91 mm E-Tube, swivel lid Series R19850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining, separating and opening of the E-Chain® and E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E4/light New E4/light version with the proved and tested "tongue and groove" system of the Series E4/4 Low weight Optimized interior-exterior dimensions ratio Cost efficient Manifold interior separation potentials Large accessory kits Thin external links Max. travel distance: 150 - 400 m Typical industrial sectors and applications Machine tools (closed E4/light tubes and open E-Chain®) Material processing Stone cutting machines Woodworking machines General mechanical engineering Vehicles Construction machinery Limited application of long travels Special design Electrically conductive ESD/ATEX versions on request "Mounted on the side" unsupported application possible High torsionalstiffness

Diameter [mm]: length [mm]: Polymer bearings applications overview Polymere bearings application examples overview Polymer bearings applications overview iglidur® J4 - low cost and low wear Lubricant- and maintenance-free Low-cost-material for large volumes Low coefficients of friction Media resistant Lowest humidity absorption Diameter [mm]: length [mm]: Polymer bearings applications overview Polymere bearings application examples overview Polymer bearings applications overview

The force measuring chain has been developed for applications where the requirements for precision are not the primary focus, but rather where an economical purchase price and simple functionality are the key criteria. The sensor‘s strain gauge technology allows both static and dynamically changing forces to be measured. The large display means that the force acting on the sensor can be read easily. The four integrated threaded holes allow the sensor to be integrated quickly and easily into existing production and assembly equipment. Typical applications include: —Testing the strength of welded joints —Sports medicine —Monitoring the clamping force of hose connections The body of the sensor is a flat, cylindrical disk, into which a domed force application knob is integrated. It is important that the force is applied axially to the center of the sensor.

This force measurement chain was developed for applications where a low cost solution is more important than achieving high levels of accuracy. The sensors strain gauge technology allows the measurement of static and dynamic forces. The load cell is also designed for applications that provide only little space due to its compact design. These properties, together with the sensors dust protection, make the measuring chain suitable for a wide range of applications, such as Industrial manufacture Manufacture of customized machinery Geological investigations Motor vehicle engineering Commercial agriculture Bridge building The body of the sensor is a flat, cylindrical disk, into which a domed force application knob is integrated. It is important that the force is applied axially to the center of the sensor. The domed form, however, minimizes the effect of a force that is not exactly axial.

This low cost tension/compression load cell is an especially robust component, which can be easily integrated in a girder assembly between two cables or chains for measuring force. The standard model comes with internal thread, allowing any adapter parts, for instance eye brackets, to be fitted in the axis of symmetry. Alternatively, the optionally available adapters with external thread can be used for quick and easy screw-fitting into a threaded hole made for the purpose. The radial connection cable is extremely flexible and designed for a wide range of motion. In order to achieve the greatest possible stability for such a small sensor, making it suitable not only for the laboratory but also for industrial use, all parts have been welded together including the cable guide bush in the sensor housing. burster TEDS with an electronic sensor datasheet or standardization of the output signal in the sensor connecting cable are offered as options

The automated assembly technology in the LIPP Double Seam System enables the fast construction of stainless steel tanks, which in turn has a positive effect on investment costs. The benefit for you flexible construction technology with efficient production on site requiring minimal installation space and ensuring a short installation time. The smooth internal walls of the LIPP Digesters (largely without any internal attachments) ensure gentle, uniform mixing while keeping energy consumption low. The external heating system guarantees uniform temperature distribution in the digester. These mechanical and thermodynamic benefits with LIPP digesters mean short retention times.

Franke FDB linear guides are suitable for linear motion tasks in almost all industries. They are particularly convincing in cost-sensitive applications with reduced demands on load capacity. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.

Low cost noise reduction Effective damping Resistance against mineraloil

Franke FDB linear guides are suitable for linear motion tasks in almost all industries. They are particularly convincing in cost-sensitive applications with reduced demands on load and noise. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.

Franke FDG linear guides are suitable for linear motion tasks in almost all industries. They are particularly convincing in cost-sensitive applications in harsh environments and with reduced demands on load capacity. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.

We supply tailored, special parts manufactured with our state-of-the-art cold-moulding and extrusion equipment. We can press cold-moulded articles – whether solid, semi-hollow or hollow – according to your drawings. Complex moulded parts and individual, special projects are our strengths. Our cold-moulding competence covers flanged bolts, studded parts, stepped bores and parts with an internal or external thread. Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.

600 1100 mBar 0 1Vdc low cost 10-40 Vdc power supply

The IG06 incremental encoder features a low-cost design with through hollow shaft and can be mounted easily. Resolutions of max. 1024 pulses/revolution. Through hollow shafts up to ø20 mm. Housing made of impact-resistant plastic. Low-cost version.

incremental Profile MA48: low-cost electronic display LCD with high contrast, 12-digit, dot matrix For incremental measuring systems Freely programmable via front keyboard

Low-cost, freely programmable measurement display for the indication of incremental position values. The alpha-numeric display enables the precise representation of measured values as well as the freely selectable representation of length and angle units. Low-cost electronic display. LCD with high contrast, 12-digit, dot matrix. For incremental measuring systems. Freely programmable via front keyboard.

Through hollow shaft Ø 14 mm. Adaptation to various measurement distances owing to a wide range of gear ratios. Compact, low-cost design. Potentiometer or power output. Easy mounting.

Low-cost and compact turning handle made of glass-fiber reinforced plastic. Various sizes. Surface with rounded edges avoids accumulation of dirt. Hub made of plastic or metal. Various hub versions.

Sturdy plastic housing with through hollow shaft Profile IG06: Resolutions of max. 1024 pulses/revolution Through hollow shafts up to ø20 mm Housing made of impact-resistant plastic Low-cost version

One-column load stand, preffered for the transmission of compressive forces up to 500 N.

One-column test stand for manual transmission of compressive and tensile forces of up to 1000 N.

The winding elements in our MKP(D) capacitors are surrounded by poison-free vegetable oil. Like our premium ranges of MKPg and MKP, the MKP(D) combines the best possible technical features with eco-friendliness and operational safety, using special metallizing patterns, our SINECUT slitting technology and optimized winding geometries. Besides excellent ratio of capacitance to volume, our MKP(D) capacitors distinguish themselves by high AC-voltage load capacity and suitability for high rms and surge currents. Our MKP(D) are available as single and three-phase capacitors and well-suited for all conventional applications in power factor correction. They have a self-healing dielectric and are provided with an irreversible overpressure disconnector (break-action mechanism, " BAM "). Connection is made through convenient standard 6.3mm tab connectors. Technical layout, testing and application accord to IEC60831, UL810 and CSA 22.2.

Our inline filter is intended for pipeline installation. It is small, compact and low cost. It is easy to replace under practical conditions and can be subsequently retrofitted with no problems. They are also suitable for a variety of applications in different sizes and materials.

Gripping technology from AMF: Inexpensive, efficient, safe High gripping force, Suitable for a diverse range of workpieces, Overload protection prevents damage, Combined application of different gripper types. The pneumatically driven gripper is available in different designs. The integrated self-resetting counterbalance elements facilitate the exact positioning of the unmachined parts or pre-cast parts and relieve the machine spindles. Our product range for low-cost automation with three different gripper elements is complete and even more flexible.

MT Overrunning Clutches combine high torque, high speed capabilities, easy field repair and low cost – all in a compact size.

• low-cost version with set-screw • plug in - oscillation dampening • Torque range: 0,7 - 12,5 Nm • Shaft diameter: 3 - 14 mm • Temperature range -20 to +70°C

• low-cost version with set-screw • high torsional stiffness - flexible • Torque range: 0,4 - 8 Nm • Shaft diameter: 3 - 24 mm • Temperature range -20 to +90°C

• low-cost version with set screws • plug in - radial shaft displacement up to 3 mm • Torque range: 1 - 15 Nm • Shaft diameter: 3 - 19 mm • Temperature range -20 to +100°C