Results for
KENDRION KUHNKE AUTOMATION GMBH
Germany
Locking solenoids of the LLV series are characterized by high forces, compact design and a lateral force carrying capacity of up to 4,000 N. The electromagnetic locking units were specially developed for use in protective devices. They are available in the versions currentless locking (CL; spring force keeps bolt in locking position) and currentless unlocking (CU; spring force keeps bolt open, locked when energized). Solenoid armature and locking bolt are guided separately in maintenance-free bearings. The latch bolt is made of stainless. The microswitch, which is installed directly in the latch housing, signals the respective position of the latch bolt approx. 0.5 mm to 1 mm after leaving the stroke start position or before reaching the stroke end position. The locking solenoids are manufactured and tested according to DIN VDE 0580/07.2000.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Locking solenoids of the LLV series are characterized by high forces, compact design and a lateral force carrying capacity of up to 4,000 N. The electromagnetic locking units were specially developed for use in protective devices. They are available in the versions currentless locking (CL; spring force keeps bolt in locking position) and currentless unlocking (CU; spring force keeps bolt open, locked when energized). Solenoid armature and locking bolt are guided separately in maintenance-free bearings. The latch bolt is made of stainless. The microswitch, which is installed directly in the latch housing, signals the respective position of the latch bolt approx. 0.5 mm to 1 mm after leaving the stroke start position or before reaching the stroke end position. The locking solenoids are manufactured and tested according to DIN VDE 0580/07.2000.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Locking solenoids of the LLV series are characterized by high forces, compact design and a lateral force carrying capacity of up to 4,000 N. The electromagnetic locking units were specially developed for use in protective devices. They are available in the versions currentless locking (CL; spring force keeps bolt in locking position) and currentless unlocking (CU; spring force keeps bolt open, locked when energized). Solenoid armature and locking bolt are guided separately in maintenance-free bearings. The latch bolt is made of stainless. The microswitch, which is installed directly in the latch housing, signals the respective position of the latch bolt approx. 0.5 mm to 1 mm after leaving the stroke start position or before reaching the stroke end position. The locking solenoids are manufactured and tested according to DIN VDE 0580/07.2000.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Wall socket 5602E with 2 slots, for standard plugs in straight or angled form. The complete housing is made of V2A stainless steel and the device carrier made of aluminum. The door can be closed with a locking bolt cylinder and also closes when plugged in. The 5602E on-wall socket is ideal for workshops, cellars and washrooms. Further equipment on request!
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
With the new height-adjustable monitor floor stand, RK Rose+Krieger is expanding its "RK monitor holder" product range to include a robust, ergonomic standing workstation for industry. The work surface and monitor mounting are supported by a stable triple column system and can be adjusted conveniently by hand to the size of the respective user. The three elegant, slim anodised aluminium columns stand on a black, powder-coated base frame which provides space for an industrial PC and accessories. Cables are elegantly routed in the integrated cable duct on the rear column. The light grey coated work surface (0.3 m2) can be adjusted by hand easily thanks to the tieback support. A spring-loaded locking bolt provides reliable latching. The height adjustment stroke is 400 millimetres. This way the workstation can be adjusted individually to the body size of the user. In addition, the height of the monitor can be adjusted separately and thus guarantees optimum workstation ergonomics.
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Maintenance oil for dismantling, lubrication and care of machine elements and metal surfaces. Dismantling of all seized or sticky components or machine elements, e.g. door locks, hinges, screws, bolts, bushings, cranks, linkages, valves, slide rails, cable pulls, shafts, etc. Lubrication of fine-mechanical instruments, measuring instruments, office and computer equipment etc., even at low temperatures Advantages and benefits Highly effective due to ideal combination of mineral oil and additives with solvent Broad range of uses in the complete maintenance sector Displaces moisture, protects against corrosion Cleans, maintains and lubricates Gets under rust
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Height adjustable monitor support arms – easy manual height adjustment and positioning The twin and telescopic support arms are now both available in a height adjustable version. Mounted on a vertical holder, the support arms can be manually adjusted over a range of 400 mm. By simply pulling out and holding the fixing bolt, the support arm can be freely moved to the required height. On release, the fixing bolt then locks the support arm in the selected position. The height adjustment feature is particularly useful for ergonomic workstations.
Request for a quoteSFS GROUP GERMANY GMBH
Germany
Working range 6.4 lock bolts MagnaGrip®* and C6L®* Technical data Weight: 2.6 kg Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4“) Air consumption: approx. 4.8 NL per rivet Setting force: 23,000 N at 6 bar Stroke: 19 mm Accessoires Angle head with nosepiece in working position Tag on device head 1 hydraulic oil bottle 100 ml 1 oil refill can Operating instructions with spare parts list Advantages • Hydro-pneumatic lock bolt setting device • Accessibility in tight working spaces • Light and compact design • Modular structure • Ergonomic handling
Request for a quoteSFS GROUP GERMANY GMBH
Germany
Working range 4.8 lock bolts MagnaGrip®* and C6L®* Technical data Weight: 2.0 kg Operating air pressure: 5 - 7 bar Air hose connection Ø: 6 mm Air consumption: 4.8 NL / stroke Traction power: 18,000 N at 5 bar Stroke: 25 mm Accessories Maintenance wrench SW12/14, SW14/17 1 hydraulic oil bottle 100 ml 1 oil refill can Operating instructions with spare parts list
Request for a quoteROLEC GEHÄUSE-SYSTEME GMBH
Germany
It is possible to directly integrate commercially available built-in panels in the front of the »multiPANEL KOMMANDO« enclosure. A small recess in the framework enables almost flush integration of the PC here. Furthermore, front plates can be inset in the frame from the front or rear, and fastened in place with clamping pieces. The combination of direct panel installation and a part front plate is also possible.With the flat multiPANEL 70 version, the rear wall is optionally available as a flush rear wall, which can be supplied with hinges and a lock or as a bolted version where required. A robust, 15mm deep, framed door including lock and internal hinges offers a greater installation depth. This results a multiPANEL enclosure depth of 85mm. Furthermore, a 60mm deep framed door version is also available for an even greater enclosure depth, which is also equipped with a lock and internal hinges. The total depth with this version is 130mm.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
The shoring frames TG 60 are made of steel tube of higher strength and are stiffened with 2 small diagonal braces. To transfer tensile forces, every frame is secured by hinged pins, locking pins or bolts to each other. In this way the towers can be assembled on the ground and placed by a crane. The shoring frames TG 60 are designed symmetrically – because of that you don’t have to care about the direction of the diagonal braces.
Request for a quoteBETONBAU GMBH UND CO. KG
Germany
"No safety door without a suitable lock... This is the principle underlying our production of variable lock systems which meet the high requirements of pertinent norms. Special security functions ensure the correct locking of the station and prevent the operating personnel being unintentionally locked in. Designs: Rim dead lock Mortise station lock Mortise switchgear house lock Mortise compact station lock Swivel lever lock Latch lock Options: lock variants on right and left Lock with KABA perforation (Switzerland) Panic bar One or two profile cylinders Bolt contacts for lock monitoring and magnet contact Stainless steel security escutcheon
Request for a quoteBETONBAU GMBH UND CO. KG
Germany
"No safety door without a suitable lock... This is the principle underlying our production of variable lock systems which meet the high requirements of pertinent norms. Special security functions ensure the correct locking of the station and prevent the operating personnel being unintentionally locked in. Designs: Rim dead lock Mortise station lock Mortise switchgear house lock Mortise compact station lock Swivel lever lock Latch lock Options: lock variants on right and left Lock with KABA perforation (Switzerland) Panic bar One or two profile cylinders Bolt contacts for lock monitoring and magnet contact Stainless steel security escutcheon
Request for a quoteFATH GMBH
Germany
For easy and secure locking of doors, sliding doors and flaps Compact version: no mechanical preparation needed for the assembly; safe against disassembling in the locked position Twin latch Compact version: provides selective access by use of a single post Version sliding door lock Compact: additional inside mounted handle recommended Lock variants: Universal = one key fits all slam latches Unique = each slam latch has a different key Fastening: From the back using M6 screws, or from the front using socket head or pan head screws (depending on model) Material: Zinc die-cast or Aluminum die-cast (depending on model) Surface: Black, Powder coated Optional: Compatible emergency opener with/without safety catch
Request for a quoteFATH GMBH
Germany
Door locks, ball catches, door bolts and accessories DOOR LOCK for easy and secure locking of swing and sliding doors, installation without mechanical processing Design: identical or different keys for each door lock MAGNETIC CATCH, BALL CATCH or DOOR LATCH Quick fastener for easy (locking) of doors or flaps, adaptable to the thickness of the panel unit Extras: electrostatically discharging, other materials, sizes and colors on request individual accessories: —angle bracket for flexibly position the magnetic catch —Spacer for ball catch to increase the distance to the aluminium profile Double ball catch —Adjustable clamping force —Application from the side or front —doors and flaps with/without frame Bolt with spring-loaded locking clamp DOOR LOCK —with damper —with magnetic catch Accessories such as sealing strips or strip brush available in the delivery range
Request for a quoteFATH GMBH
Germany
Combi Hinge to hinge panels or aluminum profiles diferent Models, Materials, Sufaces, Colors combinable hinge wings: 20, 25, 30, 35, 40, 45, 50, 60 Material: Plastic PA, glass fiber reinforced, electrostatical discharging, Stainless Model: detachable, non-detachable, with/without locking lever, electrostatical discharging, centerings bolts (optional), stainless steel axis Surface: laquered, Matt nickel plated and chromated Color: black, grey, aluminum colored, further colors on request Fastening: using countersunk screws
Request for a quoteMINEON HANDEL GMBH
Germany
Steel or Stainless Steel versions available,with key locking or non-locking,Size:140x108mm,H=31.5mm,Door Cutout:115*84mm,Easy Installation,ROHS compliance
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
MINEON HANDEL GMBH
Germany
Black PC housing,insert and lock tongue,Head Diameter Ø30,Door Cutout: Ø25.5*22.5mm,Easy Installation,ROHS compliance
Request for a quoteMINEON HANDEL GMBH
Germany
Bright chrome plated Zinc Alloy housing, insert and lock tongue,Head Diameter Ø22.5,Door Cutout: Ø19.5*16.5mm,Easy Installation,ROHS compliance
Request for a quoteMINEON HANDEL GMBH
Germany
Steel or Stainless Steel versions available,with key locking or non-locking,Size:84*68mm and 127*101.5mm,Door Cutout: 72*56mm and 109*83.5mm ,Easy Installation,ROHS compliance
Request for a quoteMINEON HANDEL GMBH
Germany
Grinding and Polishing Stainless Steel,Padlock version is available,Easy Installation,ROHS compliance.
Request for a quoteMINEON HANDEL GMBH
Germany
Sponge Foaming square sealing strip,with 3M tape,different sizes available.
Request for a quoteMINEON HANDEL GMBH
Germany
Sponge Foaming square sealing strip,with 3M tape,different sizes available.
Request for a quoteMINEON HANDEL GMBH
Germany
EPDM profile gasket with a good performance of aging resistance, water resistance, corrosion resistance.
Request for a quoteMINEON HANDEL GMBH
Germany
PVC profile gasket with a good performance of aging resistance, water resistance, corrosion resistance.
Request for a quoteMINEON HANDEL GMBH
Germany
EPDM profile gasket with a good performance of aging resistance, water resistance, corrosion resistance.
Request for a quoteMINEON HANDEL GMBH
Germany
Bright chrome Plated Steel Body,L Sizes:105*107mm and 70*85mm,LH and RH,ROHS compliance.
Request for a quoteMINEON HANDEL GMBH
Germany
Steel or Stainless Steel versions available,LH and RH,ROHS compliance.
Request for a quoteMINEON HANDEL GMBH
Germany
Black Nylon Handle,different sizes available,Maximum static load: 400N,Easy Installation.
Request for a quoteResults for
Locking bolts - Import exportNumber of results
49 ProductsCountries
Company type
Category