Results for
IGUS® GMBH
Germany
E4Q energy chains have been developed to provide the best possible solution for unsupported and long travels. Based on the robust E4.1 energy chain standard, which has proven itself over 12 years, the new series brings a long service life and high modularity. - Tool-free opening and closing - Reduced protrusions in the interior, for easier filling when the e-chain® is open - 15 % more pull-out force of the opening webs compared to the E4.1 system - 10 % less weight due to material recesses compared to system E4.1 - Optional 17 dB(A) quieter due to noise-reducing parts made of material optimized for noise level - 40 % less installation time compared to system E4.1 - Up to 35 % savings possible when used in the limit range - 36 months warranty - Predictive maintenance - optional with the isense add-on module Typical applications: Machine tools, crane systems, automation systems
Request for a quoteIGUS® GMBH
Germany
Further information Series E4.31L Internal height hi: 31mm Internal widths Bi: 40 - 300 mm Bending radii R: 055 - 250 mm Pitch: 46 mm E-Chain® with crossbars at every link Series E4.38L Inner height hi: 38mm Inner widths Bi: 50 - 400 mm Bending radii R: 063 - 350 mm Pitch: 56 mm E-Chain® with crossbars at every link Series E4.48L Inner height hi: 48 mm Inner widths Bi: 50 - 400 mm bending radii R: 075 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Serie R4.31L Internal height hi: 31mm Internal widths Bi: 50 - 300 mm Bending radii R: 075 - 250 mm Pitch: 46 mm e-tube, swivel lid Serie R4.38L Internal height hi: 38mm Internal widths Bi: 50 - 300 mm Bending radii R: 100 - 350 mm Pitch: 56 mm e-tube, swivel lid Serie R4.48L Inner height hi: 48 mm Inner widths Bi: 50 - 300 mm bending radii R: 100 - 350 mm Pitch: 67 mm e-tube, swivel lid 41 dB(A) determined at the igus® laboratory, v = 1,8 m/s unsupported ESD classification: Electrically conductive ESD/Atex versions on request High torsion rigidity iF Design prize 2014 for R4.1 light energy tubes Further information Series E4.31L Internal height hi: 31mm Internal widths Bi: 40 - 300 mm Bending radii R: 055 - 250 mm Pitch: 46 mm E-Chain® with crossbars at every link Series E4.38L Inner height hi: 38mm Inner widths Bi: 50 - 400 mm Bending radii R: 063 - 350 mm Pitch: 56 mm E-Chain® with crossbars at every link Series E4.48L Inner height hi: 48 mm Inner widths Bi: 50 - 400 mm bending radii R: 075 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Serie R4.31L Internal height hi: 31mm Internal widths Bi: 50 - 300 mm Bending radii R: 075 - 250 mm Pitch: 46 mm e-tube, swivel lid Serie R4.38L Internal height hi: 38mm Internal widths Bi: 50 - 300 mm Bending radii R: 100 - 350 mm Pitch: 56 mm e-tube, swivel lid Serie R4.48L Inner height hi: 48 mm Inner widths Bi: 50 - 300 mm bending radii R: 100 - 350 mm Pitch: 67 mm e-tube, swivel lid Connecting two E4.1L chain segments Replacing E4.1 L chain links Extender crossbars E4.1 light E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Assembly instruction Joining, separating and opening of the E-Chain® and E-Tubes. Assembly instruction Application examples Applications in various industrial sectors and in the igus® test laboratory. E4.1 light E4.1 light e-chains® with 4-piece structure Less weight, enhanced dynamics possible. Snap-open crossbars on both sides Snap-open along the inner and outer radius Optimized interior-exterior dimensions ratio due to narrower outer links and optimized crossbar shape. Inner diameter completely accessible for easy filling. Unique side plate with tongue and groove system. Low-priced Short assembly time Typical industrial sectors and applications Low-priced alternative to E4.1 For unsupported applications When the ruggedness of the E2/000 is inadequate, but the E4.1 is oversized 41 dB(A) determined at the igus® laboratory, v = 1,8 m/s unsupported ESD classification: Electrically conductive ESD/Atex versions on request High torsion rigidity iF Design prize 2014 for R4.1 light energy tubes
Request for a quoteIGUS® GMBH
Germany
The troubleshooter for energy supply systems in the chip area - available in 4 sizes. Chips and dirt can affect the service life of cables and hoses significantly. With the RX system, igus® offers an extremely tight plastic e-tube that is nonetheless very easy to open. Snap-open in the outer radius A smooth, curved outer contour prevents chips from sticking Injection-molded "sealing lips" all around No holes, cracks, undercuts Series RX40 is IP40 tested (TÜV Saarland) Interior separation and guide trough available Covered pin/hole connection and stops "RBR" version with bending radius on both sides available Typical branches of industry Machine tools All applications in the direct chip sector Applications exposed to dust and dirt General mechanical engineering Dimensions and technical datas RX e-tubes RX32 Inner height hi: 42 mm Inner widths Bi: 80mm Bending radii R: 80 - 250 mm Pitch: 32 mm RX E-Tube RX40 Inner height hi: 52 mm Inner widths Bi: 100 mm bending radii R: 100 - 300 mm Pitch: 40 mm RX E-Tube RX48 Inner height hi: 62 mm Inner widths Bi: 120mm Bending radii R: 120 - 325 mm Pitch: 48 mm RX E-Tube RX56 Inner height hi: 73 mm Inner widths Bi: 140mm Bending radii R: 140 - 350 mm Pitch: 56 mm RX E-Tube RX56 High-temperature plastic version of the chip-proof RX energy tubes from stock - 850°C from 24h RX - from stock against hot chips red dot 2011: honourable mention for RX40 iF-Design-Award for RX e-tubes ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 classification on request e-tubes available as special design with HT material for 850°C hot chips The troubleshooter for energy supply systems in the chip area - available in 4 sizes. Chips and dirt can affect the service life of cables and hoses significantly. With the RX system, igus® offers an extremely tight plastic e-tube that is nonetheless very easy to open. Snap-open in the outer radius A smooth, curved outer contour prevents chips from sticking Injection-molded "sealing lips" all around No holes, cracks, undercuts Series RX40 is IP40 tested (TÜV Saarland) Interior separation and guide trough available Covered pin/hole connection and stops "RBR" version with bending radius on both sides available Typical branches of industry Machine tools All applications in the direct chip sector Applications exposed to dust and dirt General mechanical engineering Dimensions and technical datas RX e-tubes Chip tests in the igus® laboratory demonstrate the tremendous chip-proof properties of the igus® RX tube. Chip-proof - for all types of chips and applications RX32 Inner height hi: 42 mm Inner widths Bi: 80mm Bending radii R: 80 - 250 mm Pitch: 32 mm RX E-Tube RX40 Inner height hi: 52 mm Inner widths Bi: 100 mm bending radii R: 100 - 300 mm Pitch: 40 mm RX E-Tube RX48 Inner height hi: 62 mm Inner widths Bi: 120mm Bending radii R: 120 - 325 mm Pitch: 48 mm RX E-Tube RX56 Inner height hi: 73 mm Inner widths Bi: 140mm Bending radii R: 140 - 350 mm Pitch: 56 mm RX E-Tube RX56 High-temperature plastic version of the chip-proof RX energy tubes from stock - 850°C from 24h RX - from stock against hot chips Submersion test in water - Various tube types were submerged under water. The new RX tube needs over 30 seconds until it is filled up, thus proving its high leak tightness Y = time in seconds A = igus® products B = competitor Chip penetration test - Various types of tube were exposed to a defined quantity of chips. In the new RX tube, after 80,000 cycles only 0.2 g of chips were found in the interior Y = chip mass [g] A = igus® RX e-tube RX40.100.100 251.900 cycles B = igus® e-tubes 68.10.100.0 256.132 cycles C = test tube 01 250.907 cycles D = test tube 02* 2.600 cycles *Teststop after 2.600 cycles E = igus® products F = competitor E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Productfinder Assembly instruction Dismantling / assembling a cover, replacing a chain link and assembling / inserting the RX tube. Assembly instruction Configure interior separation Define cables, select chain and configure interior separation. Now also for RX tubes! Interior separation configurator Application examples Applications in various industrial sectors. RX tubes Series RX - new chip-proof design, small pitch, removable cover 1 Chip-proof design without undercuts and edges 2 Excentric locking 3 Material igumid G 4 rounded shape 5 covered pin/hole connection RX tubes IP tested Technical report TÜV NORD red dot 2011: honourable mention for RX40 iF-Design-Award for RX e-tubes ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 classification on request e-tubes available as special design with HT material for 850°C hot chips
Request for a quoteIGUS® GMBH
Germany
Overview for E2/000 advantages Other information Series EF2.21 Inner height hi: 21 mm Inner widths Bi: 25 - 50 mm bending radii R: 35 - 180 mm Pitch: 33.3 mm E-Chain®, snap-open along the outer radius Series 1500 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm E-Chain®, snap-open along the outer radius Series 1400 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm E-Chain®, snap-open along the inner radius Series 1450 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm Half energy tube, snap-open along the inner radius Series 1480 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm Full energy tube, snap-open along the inner radius Series 2500 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain®, snap-open along the outer radius Series 2400 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain®, snap-open along the inner radius Series 2450 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 100 - 250 mm Pitch: 46 mm Half energy tube, snap-open along the inner radius Series 2480 Inner height hi: 25 mm Inner widths Bi: 38 - 103 mm bending radii R: 100 - 250 mm Pitch: 46 mm Full energy tube, snap-open along the inner radius Series 2700 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, snap-open along the outer radius Series 2600 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, snap-open along the inner radius Series 2650 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 100 - 250 mm Pitch: 56 mm Half energy tube, snap-open along the inner radius Series 2680 Inner height hi: 35 mm Inner widths Bi: 50 - 100 mm bending radii R: 100 - 250 mm Pitch: 56 mm Full energy tube, snap-open along the inner radius Series 3500 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, snap-open along the outer radius Series 3400 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, snap-open along the inner radius Series 3450 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 150 - 300 mm Pitch: 67 mm Half energy tube, snap-open along the inner radius Series 3480 Inner height hi: 45 mm Inner widths Bi: 75 - 115 mm bending radii R: 150 - 300 mm Pitch: 67 mm Full energy tube, snap-open along the inner radius Series 255 Inner height hi: 24 mm Inner width Bi: 25 mm Bending radii R: 55 - 250 mm Pitch: 27.8 mm E-Chain®, snap-open along the outer radius CRC series. 255 Inner height hi: 24 mm Inner width Bi: 38-103 mm Bending radii R: 150 - 250 mm Pitch: 27.8 mm e-chain® Series CRC. 255 Assembly tool E"2/000 e-chains® - quick opening with assembly tools. Assembly tool Overview E2/000 bow chains Two-part - the E2 standard as clamp chain version Overview E2/000 bow chains ESD classification: Electrically conductive ESD/Atex versions on request IPA classification: ISO cleanroom class 3 (DIN 14644-1), at v=2 m/s, with standard material igumid G Series 2500.05.055.0 UL94 V0 classifications on request 46 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, e. g. Series 2600.05.075.0 iF Design Award for the E2/000 series EF2.21 Overview for E2/000 advantages Other information Series EF2.21 Inner height hi: 21 mm Inner widths Bi: 25 - 50 mm bending radii R: 35 - 180 mm Pitch: 33.3 mm E-Chain®, snap-open along the outer radius Series 1500 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm E-Chain®, snap-open along the outer radius Series 1400 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm E-Chain®, snap-open along the inner radius Series 1450 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm Half energy tube, snap-open along the inner radius Series 1480 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm Full energy tube, snap-open along the inner radius Series 2500 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain®, snap-open along the outer radius Series 2400 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain®, snap-open along the inner radius Series 2450 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 100 - 250 mm Pitch: 46 mm Half energy tube, snap-open along the inner radius Series 2480 Inner height hi: 25 mm Inner widths Bi: 38 - 103 mm bending radii R: 100 - 250 mm Pitch: 46 mm Full energy tube, snap-open along the inner radius Series 2700 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, snap-open along the outer radius Series 2600 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, snap-open along the inner radius Series 2650 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 100 - 250 mm Pitch: 56 mm Half energy tube, snap-open along the inner radius Series 2680 Inner height hi: 35 mm Inner widths Bi: 50 - 100 mm bending radii R: 100 - 250 mm Pitch: 56 mm Full energy tube, snap-open along the inner radius Series 3500 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, snap-open along the outer radius Series 3400 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, snap-open along the inner radius Series 3450 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 150 - 300 mm Pitch: 67 mm Half energy tube, snap-open along the inner radius Series 3480 Inner height hi: 45 mm Inner widths Bi: 75 - 115 mm bending radii R: 150 - 300 mm Pitch: 67 mm Full energy tube, snap-open along the inner radius Series 255 Inner height hi: 24 mm Inner width Bi: 25 mm Bending radii R: 55 - 250 mm Pitch: 27.8 mm E-Chain®, snap-open along the outer radius CRC series. 255 Inner height hi: 24 mm Inner width Bi: 38-103 mm Bending radii R: 150 - 250 mm Pitch: 27.8 mm e-chain® Series CRC. 255 Assembly tool E"2/000 e-chains® - quick opening with assembly tools. Assembly tool Overview E2/000 bow chains Two-part - the E2 standard as clamp chain version Overview E2/000 bow chains IPA Classification Report IG 1303-640-1, tested 1500.050.038.0 at v = 0,5 / 1,0 / 2,0 ISO Class 2, according to DIN EN ISO 14644-1 E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of chain links, filling of the E-Tubes. Assembly Instructions System E2/000 Recommended installation accessories Application examples Applications in various industrial sectors and in the igus® test laboratory. System E2/000 The E2 standard Quickly opened from the right or left with a screwdriver or by hand - opening mechanism accessible from above Lightning fast installation using thumb - safe seat without additional closing mechanism The separators and interior separation sit safely, even when the E-Chain® is open Excellent mechanical stability; design and material provide long service life Typical industrial sectors and applications General construction machinery Materials handling technology Construction machinery Wood machines Machine tools Glass machines Plastic machines Long travels Semiconductor Theater and entertaining industry Vehicles And much more ESD classification: Electrically conductive ESD/Atex versions on request IPA classification: ISO cleanroom class 3 (DIN 14644-1), at v=2 m/s, with standard material igumid G Series 2500.05.055.0 UL94 V0 classifications on request 46 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, e. g. Series 2600.05.075.0 iF Design Award for the E2/000 series EF2.21
Request for a quoteIGUS® GMBH
Germany
Other information Series 10 Inner height hi: 18 mm Inner widths Bi: 15 - 100 mm bending radii R: 28 - 180 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 11.031 Inner height hi: 23 mm Inner width Bi: 31 mm Bending radii R: 45 - 70 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.080 Inner height hi: 28 mm Inner width Bi: 80 mm Bending radius R: 38 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.1/11.2 Inner height hi: 41 mm Inner widths Bi: 15 - 25 mm bending radii R: 40 - 100 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 14 Inner height hi: 20 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15i Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B17i Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series F17 Inner height hi: 32 mm Inner height Bi: 15 mm Bending radii R: 48 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open outside Series B17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open outside UL94-V2 classifications Cleanroom class 1 (ISO class 3) Series 10 tested by Dryden Engineering Company, California Special version: Electrically conductive ESD/ATEX versions on request Other information Series 10 Inner height hi: 18 mm Inner widths Bi: 15 - 100 mm bending radii R: 28 - 180 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 11.031 Inner height hi: 23 mm Inner width Bi: 31 mm Bending radii R: 45 - 70 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.080 Inner height hi: 28 mm Inner width Bi: 80 mm Bending radius R: 38 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.1/11.2 Inner height hi: 41 mm Inner widths Bi: 15 - 25 mm bending radii R: 40 - 100 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 14 Inner height hi: 20 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15i Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B17i Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series F17 Inner height hi: 32 mm Inner height Bi: 15 mm Bending radii R: 48 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open outside Series B17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open outside E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of chain links Assembly Instructions Application examples Applications in various industrial sectors. E2 mini One-/Two-piece E-Chain® Small pitch for silent operation High torsion resistance Double stop system and large pins for long service life Optimized weight/stability ratio Easy to mount Manifold interior separation Typical industrial sectors and applications Construction machinery Handling systems Installation Packaging machines Textile machines Vehicle construction Wood machines Glass machines Machine construction General mechanical engineering etc. UL94-V2 classifications Cleanroom class 1 (ISO class 3) Series 10 tested by Dryden Engineering Company, California Special version: Electrically conductive ESD/ATEX versions on request
Request for a quoteIGUS® GMBH
Germany
iF-Design prize for SnapChain design Easy Chain® Zipper 1. Quickly mount cable packets in bundles 2. Loops can be adjusted and modified anytime 3. Well-suited for short lengths, ideally 5 - 10 links 4. Low-priced alternative to complex cable shears 5. TE version snap-open along outer radius - TZ version snap-open along inner radius 6. Shapely design 7. Can bend in 1 or 2 directions (RBR) 8. Available in 2 sizes When to use the SnapChain series? When easy filling is required When a cost-effective E-Chain® is required When low installation costs are required When a simple solution is required With low travel frequency iF-Design prize for SnapChain design Model TE14/TZ14 Pitch = 30.5 mm Links/m = 33(1006.5 mm) Chain length = s/2 + K Model TE26/TZ26 Pitch = 56 mm Links/m = 18 (1008 mm) Chain length = s/2 + K
Request for a quoteIGUS® GMBH
Germany
Other information Series E1.10 Inner height hi: 10 mm Inner height Bi: 13 mm Bending radii R: 18 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series E1.17 Inner height hi: 17 mm Inner width Bi: 21 - 44 mm Bending radii R: 28 mm Pitch: 25,5 mm E-Chain®, snap-open along the outer radius E1.18 series Inner height hi: 18 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25.25 mm E-Chain®, snap-open along the outer radius Series E1.20 Inner height hi: 20 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25 mm E-Chain®, snap-open along the outer radius UL94-V2 classification Series E1.10 Inner height hi: 10 mm Inner height Bi: 13 mm Bending radii R: 18 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series E1.17 Inner height hi: 17 mm Inner width Bi: 21 - 44 mm Bending radii R: 28 mm Pitch: 25,5 mm E-Chain®, snap-open along the outer radius E1.18 series Inner height hi: 18 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25.25 mm E-Chain®, snap-open along the outer radius Series E1.20 Inner height hi: 20 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25 mm E-Chain®, snap-open along the outer radius Other information E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Shortening and lengthening of the E-Chain®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E-Chain® Applications Overview E-Chain® in one band Cost-effective solution for large numbers E1: E-Chain® in one band Length of each chain band: 255 mm Can be shortened or lengthened as required through injection-molded, modular chain band Easy snap-open Mounting link for connection of several chain bands Fastening potential by the bore on the chain band Several potential materials Typical industrial sectors and applications General construction machinery Automotive sector Office technology Machine construction Electronic equipment General construction machinery etc. UL94-V2 classification
Request for a quoteIGUS® GMBH
Germany
Other information Series 2828 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every link Series 3838 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Series 4040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 5050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 2928 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every other link Series 3938 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every other link Series 4140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 5150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 4040HD Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 400 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 5050HD Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series R7728 Inner height hi: 32 mm Inner widths Bi: 50 - 300 mm bending radii R: 100 - 300 mm Pitch: 56 mm E-Tube, swivel lid Series R7838 Inner height hi: 42 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 350 mm Pitch: 67 mm E-Tube, swivel lid Series R8840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R9850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 1000 mm Pitch: 91 mm E-Tube, swivel lid Series R8840HD Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 400 mm Pitch: 91 mm E-Tube, swivel lid Series R9850HD Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series ATEX/ESD: Excellent match with special material igumid ESD (on request). "Mounted on the side" unsupported application possible High torsional stiffness System E4/4 proven in long travels Other information Series 2828 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every link Series 3838 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Series 4040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 5050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 2928 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every other link Series 3938 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every other link Series 4140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 5150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 4040HD Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 400 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 5050HD Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series R7728 Inner height hi: 32 mm Inner widths Bi: 50 - 300 mm bending radii R: 100 - 300 mm Pitch: 56 mm E-Tube, swivel lid Series R7838 Inner height hi: 42 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 350 mm Pitch: 67 mm E-Tube, swivel lid Series R8840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R9850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 1000 mm Pitch: 91 mm E-Tube, swivel lid Series R8840HD Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 400 mm Pitch: 91 mm E-Tube, swivel lid Series R9850HD Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining, separating and opening of the E-Chain® and E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E4/4 "Mounted on the side" - Travel distances over 200 m "Mounted on the side" - Travel distances over 200 m Extensive unsupported lengths for "side-mounted" applications Roller E-Chain® links available (with roller chain) Max. travel distance: 200 - 800 m High torsional stability Manifold interior separation potentials Large accessory kits Typical industrial sectors and applications RTG, quayside cranes, many other types of cranes Composting plants Gypsum, concrete, chemical and mineral plants, as well as agricultural plants Machine tools: unsupported, side-mounted applications Construction machinery ESD applications Heavy machinery Steel works Shipyards Welding plants ATEX/ESD: Excellent match with special material igumid ESD (on request). "Mounted on the side" unsupported application possible High torsional stiffness System E4/4 proven in long travels
Request for a quoteIGUS® GMBH
Germany
Lightning fast opening and closing with Zipper E-Chain® und E-Tubes - Zipper E-Chain® satisfy by their practicability and performance. The "zip fastening" function shortens the installation time. The small pitch, the rugged elastic zipper band and the heavy duty links amaze in high accelerations. The Zipper series is one of the most popular igus® E-Chain® series in the sophisticated industrial sectors. Other information Series 047 Inner height hi: 9 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, rip-open along the outer radius Series 07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series 17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series R07 Inner height hi: 10,3 mm Inner widths Bi: 10 - 50 mm bending radii R: 38 - 48 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 48 - 100 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R15 Inner height hi: 17 mm Inner widths Bi: 25 - 80 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Series R17 Inner height hi: 32 mm Inner widths Bi: 15 - 63 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Clean room Class 1 (ISO class 3) for Series 15, tested by the Dryden Engineering Company, California. iF-Design-Award for Zipper-Design UL94-V0 classification on request 58 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 09.50.028.0 Lightning fast opening and closing with Zipper E-Chain® und E-Tubes - Zipper E-Chain® satisfy by their practicability and performance. The "zip fastening" function shortens the installation time. The small pitch, the rugged elastic zipper band and the heavy duty links amaze in high accelerations. The Zipper series is one of the most popular igus® E-Chain® series in the sophisticated industrial sectors. Series 047 Inner height hi: 9 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, rip-open along the outer radius Series 07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series 17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series R07 Inner height hi: 10,3 mm Inner widths Bi: 10 - 50 mm bending radii R: 38 - 48 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 48 - 100 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R15 Inner height hi: 17 mm Inner widths Bi: 25 - 80 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Series R17 Inner height hi: 32 mm Inner widths Bi: 15 - 63 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the Zipper E-Chain®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Zipper Zipper E-Chain® Short installation time: Lightning fast opening and closing of lids with zipper Zipper lid can be separated and joined in any chain link Small pitch for low-noise, silent operation High accelerations: 100 m/s² and more Interior separation possible Zipper E-Tube resistant against chips and dirt Closed E-Tube with zip-open system Protection against dirt and chips Lightning fast opening of the lid in a band Modular design - simple lengthening and shortening Small division for low-noise, silent operation, high accelerations Typical industrial sectors and applications Automatic insertion machines Semiconductor devices Linear motors, handling systems Any kind of technical equipment Measuring instruments Machine tools (Zipper E-tube) Clean room Class 1 (ISO class 3) for Series 15, tested by the Dryden Engineering Company, California. iF-Design-Award for Zipper-Design UL94-V0 classification on request 58 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 09.50.028.0
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Lubrication of fast-running drive chains of all designs for open or semi-open operation without a permanent re-lubricating device, such as motorcycle and bicycle chains Lubrication of hoisting chains such as multirow roller chains or stacker truck chains, as well as single or multiple flat-link articulated chains Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Extreme adhesive strength Extreme wear protection through Moₓ-Active additive Very high resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral For best adhesion, clean the surfaces mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply OKS 340 with a brush, drip oiler, by immersion or using a suitable automatic lubrication system. Spray on evenly OKS 341 spray. Allow excess to drip off and wait for lubricant to penetrate before resuming operation.
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Lubrication of fast-running drive chains of all designs for open or semi-open operation without a permanent re-lubricating device, such as motorcycle and bicycle chains Lubrication of hoisting chains such as multirow roller chains or stacker truck chains, as well as single or multiple flat-link articulated chains Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Extreme adhesive strength Extreme wear protection through Moₓ-Active additive Very high resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral Also available as spray version OKS 341 For best adhesion, clean the surfaces mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply OKS 340 with a brush, drip oiler, by immersion or using a suitable automatic lubrication system. Spray on evenly OKS 341 spray. Allow excess to drip off and wait for lubricant to penetrate before resuming operation.
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Loosening of rusted-on connections such as screws, nuts, levers, joints or locks Non-destructive disassembly of seized or rusted-in parts such as bolts, chain links, springs, valves or hinges Advantages and benefits High effectiveness thanks to gap penetration properties Minimizing of the effort required to loosen seized parts and restoring of mobility Good lubricating properties thanks to MoS₂ Loosened parts are protected against new corrosion forming Eliminates squeaking noises Displaces moisture
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Driving and conveyor chains of all designs in open or semi-enclosed operation without a re-lubrication device Roller chains such as motorcycle and bicycle chains Stacker truck chains as well as single or multiple flat-link articulated chains without a re-lubrication device Rope drives and wire pulls; for example, standing, hoisting, traction or winch ropes in hoisting gears, elevators, lifts or mountain railways Flexible drives, bowden and spring cables Moving machine parts exposed to outdoor weathering, such as toothed gearing, guides, closing mechanisms, hinges or sliding surfaces Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Highly adhesive and resistant to throwing off Contains Moₓ-Active for increased performance Excellent wear protection Very good resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Driving and conveyor chains of all designs in open or semi-enclosed operation without a re-lubrication device Roller chains such as motorcycle and bicycle chains Stacker truck chains as well as single or multiple flat-link articulated chains without a re-lubrication device Rope drives and wire pulls; for example, standing, hoisting, traction or winch ropes in hoisting gears, elevators, lifts or mountain railways Flexible drives, bowden and spring cables Moving machine parts exposed to outdoor weathering, such as toothed gearing, guides, closing mechanisms, hinges or sliding surfaces Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Highly adhesive and resistant to throwing off Contains Moₓ-Active for increased performance Excellent wear protection Very good resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral Also available as spray version OKS 451
Request for a quoteKB SCHMIEDETECHNIK GMBH - A GERMAN DROP FORGE - CLOSED DIE FORGINGS - ALL STEEL GRADES
Germany
KB Schmiedetechnik GmbH is a drop forge in West Germany, located between the historic “blade & metal region” Solingen and the “soccer city” Dortmund, specializing in small series production of safety-relevant closed die forgings from 200g to 130Kg unit weight of all steel grades and alloys according to following certifications and standards: pressure equipment: valves, boiler systems, piping PED 2014/68/EU, AD 2000-W0, ASME/ASTM, CNIM, Alstom, MHPS nuclear power/ atomic energy and plant construction KTA3201.1, KTA1401, AVS D 100/50, Siemens, EDF/Areva/RCC-M naval architecture/ shipbuilding and offshore/ ocean engineering, certified by • American Bureau of Shipping (ABS) • Bureau Veritas Marine & Offshore(BV) • Det Norske Veritas (DNV) • Lloyd´s Register (LR) • Nippon Kaiji Kyōkai (ClassNK) Examples: components and equipment like brackets, holders, chain links, hoists, lifting hooks, fasteners, pressure-bearing parts like valve bodies, pipe connections, gearwheels, ...
Request for a quoteKB SCHMIEDETECHNIK GMBH - A GERMAN DROP FORGE - CLOSED DIE FORGINGS - ALL STEEL GRADES
Germany
Drop-forgings of carbon and alloyed steel, nickel, duplex, titanium and superalloys like Monel® or Hastelloy®, Inconel®, Incoloy® for pressurized components like forged valves or valve parts like bodies and yokes or bonnets, flanges for boiler systems, fittings for piping, non-corroding parts for shipbuilding, marine technology, slings and lifting gear, hooks, eyebolts, nuts, chain links, military vehicles, transportation and defense. Every nut, bolt, and screw - forgings for harsh environments: forged valve bodies, bonnets, yokes and flanges, pipe connections, pressure applications like boiler parts, hoists, chain links, eyebolts, hydraulic components, corrosion and acid-resistant parts for chemical and fertilizer industries, as well as shipbuilding and drill equipment. Pressure equipment and nuclear power (valves, boilers, piping): PED 2014/68/EU, AD 2000-W0, ASME/ASTM, KTA, RCC-M Shipbuilding and maritime industry ABS, BV Marine & Offshore, DNV, LR Shipping, ClassNK
Request for a quoteKB SCHMIEDETECHNIK GMBH - A GERMAN DROP FORGE - CLOSED DIE FORGINGS - ALL STEEL GRADES
Germany
Forgings have a grain flow, like the fiber structure of wood, caused by plastic deformation during the forging process. Proper orientation of grain flow improves the physical properties of forged parts. Everyday examples for forgings are car wheel bolts or screw nuts. Further examples include all kind of fasteners and hoists including forged hooks, eyebolts, and chain links. Forgings are also part of complex assemblies like crawler track chains, articulation sockets for busses or trains, hydraulic systems and lifting gears, as well gearwheels (forged blanks), pinions, rollers, holders and supports. Made in Germany of European primary material KB Schmiedetechnik GmbH is a Western German drop forge, specialized in small series production of closed die forgings from 200g to 130Kg unit weight and up to 600mm length of all forgeable steel grades and superalloys according to: ISO 9001 + ISO 14001 ASME, PED, KTA, RCC-M ABS, BV, ClassNK, DNV, LR
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
KFB CLARFELD GERMANY GMBH
Germany
In an industrial facility,motors and turbines use energy to produce rotational mechanical motion.In order to realize this motion, are needed power transmission products to transmit it to other components and machines. Chain drives consist of an endless series of chain links,which mesh with toothed sprockets. Are used to perform three basic functions:transmitting power,conveying materials and timing purposes. Chain drives transfer speed and torque through the use of a linked chain and sprockets. KFB Clarfeld offer chains and sprockets produced according to ISO or ANSI norms.
Request for a quoteELECTRONICON KONDENSATOREN GMBH
Germany
In modern applications of power electronics, AC capacitors are among the most critical links in the chain of components when it comes to long operating life, safety and reliability of operation. Decades of proprietary ELECTRONICON experience in metallizing capacitor films and designing high-end capacitors have created our very own Know-How, for instance in special metallizing patterns, our SINECUT slitting technology and optimized winding geometries. This enables us to design AC capacitors with a high specific ratio of capacitance to volume, high AC-voltage load capacity and outstanding suitability for high rms and surge currents. The cylindrical capacitors of our universal AC/DC series "E62" are perfect for non-sinusoidal voltages and pulsed currents, e.g. as damping or commutation capacitors switched in parallel to a thyristor, or connected in series with a resistor (damping of undesirable voltage spikes during the switching of power semiconductors).
Request for a quoteHAACON HEBETECHNIK GMBH
Germany
Hand driven all purpose gear drive for multiple applications. Motor drive possible for a speed up to 60 revolutions/min. robust and reliable maintenance-free security crank with internal self actuating load brake alternatively without self actuating load brake for shifting of loads can be equipped with: one or several rope drums chain wheels for roller chains chain sprockets for link chains with crank extensions with crankshaft extension
Request for a quoteIWIS ANTRIEBSSYSTEME GMBH & CO. KG
Germany
Bush conveyor chains are often used for conveying tasksinvolving long transport distances at relatively low speeds. Since only a small minority of chains used in the industry are totally compliant with one specific standard, ELITE conveyor chains are custom-made to a specific customer order and consequently fulfil a large number of special requirements. ELITE highlights: • Pins usually made of heat-treated alloy steel, inductionhardened • Bushes made from seamless precision steel tube, case-hardened • Link plates made of high-strength tempered steel or case-hardened steel alloy • Rollers (where present) made of case-hardened steel, case-hardened
Request for a quoteIWIS ANTRIEBSSYSTEME GMBH & CO. KG
Germany
For heavy-duty applications Rotary chains are roller chains with cranked links. The cranked links give the rotary chain greater elasticity to withstand shock loads. Main application areas for rotary chains: Excavators Tracked vehicles Drilling rigs
Request for a quoteIBG HYDROTECH GMBH
Germany
The standard chain slinger is used with link chains and can also be used purposefully without a guide cage up to DN 300.
Request for a quoteIBG HYDROTECH GMBH
Germany
The combination chain rotor can be operated with double-row control chains as well as with link chains. Work is more effective as soon as a guide cage is used. Also available in curved version!
Request for a quoteFTK FÖRDERBAND TECHNIK KILIAN GMBH
Germany
Pull cords are used as actuators for operating pull rope emergency stop switches along conveyor belt systems. The pull cord and the accessories required for installation are functionally matched to the pull rope emergency stop switch, taking normative requirements into account. We therefore constantly carry out Pull cord, steel cable, 3mm or 5mm red PVC sheathed Various types of tension springs Anchor hook M10 Anchor hook M12 Anchor hook M8 Turnbuckle M6; 2 eyelets Turnbuckle M6; 1 hook / 1 eye Chain link 6 Eye bolt M12x60 * Eye bolt M12x200 * Eye bolt M12x60 * Clamp bracket, size. 3 5 Clamp egg shaped, size. 3 Clamp egg shaped, size. 5 Thimble Gr. 3 Thimble Gr. 5 Marking plate for rip cord Deflection pulley M10x60, pulley And much more
Request for a quoteResults for
Link chains - Import exportNumber of results
26 ProductsCountries
Company type
Category