Lifting beam - Import export

In addition to the various possibilities of using robots, we also offer different lifting beams for demoulding and easy handling, both for use with RATEC shuttering within and outside the centre of gravity. Our lifting beams are tailored to our shuttering by means of intelligent attachment solutions, allowing for safe and straightforward handling in the plant.

The Battery Telescopic Magnetic Traverse EPMBL-T with automatic telescopic arm is a fully battery operated magnetic lifting beam. It enables the mains-independent lifting and transporting of different sheet metal formats (up to 12 t) from 4 mm thickness.

FX-KT small trusses lift workpieces that cannot be picked up with a magnet in the center, such as rings, punching tools and flanges. Two FX magnets, adjustably mounted on a truss made of high-strength aluminum, provide a secure hold. With a few simple steps, the magnets can be removed from the truss and used individually.

Equipped with pole type 50+ in long narrow design and a maximum load capacity of 400/600/1000 kg, which is achieved with material thicknesses from 15mm, these easy-to-guide and operate devices are recommended for lifting battens, rails, pipes, beams and bars. Also using pole extensions, which make it easier to position the magnets on long narrow bars.

The CLAD-LIFT 350TH is designed to handle glass, windows, panels, doors or other elements up to 350 kg in weight with great efficiency. This vacuum lifting device with hydraulic telescopic beam enables the operator to rotate the workpiece by 360 ° vertical and 180 ° horizontal. The Clad-Lift 350TH ( „TH“ for „telehandlers“ ) is a special version that can be attached to telehandlers or forklifts. The window mounting device for telescope crane and forklift Examples of use: Technical Data Article No. 1020170 Max. Extension Lifting Beam ( horizontal ): 790 mm Outer length: 1.850 mm Max. Height to the center of the lifting yoke 2.700 mm Outer width: 840 mm Max. Height to center of lifting yoke: 100 mm Max. Lifting capacity: approx 350 kg Tower fine adjustment ( hydraulic ): 500 mm Max. Load at maximum extension: 200 kg Batteries: 2 x 95 Ah Max. Last bei seitlichem Transport 200 kg Rotation 360° Weight: 423 kg Suction plates: 6 x Ø 270 mm Minimum Extension: 290 mm

The CLAD-LIFT 785 is designed to handle glass, windows, panels, doors or other elements up to 785 kg in weight with great efficiency. This vacuum lifting device with hydraulic telescopic beam enables the operator to rotate the workpiece 180 ° vertically and 180 ° horizontally via the hydraulic system. The front driven Clad-Lift 785 with its polyurethane foam filled wheels is extremly manoeuvrable, not only on levelled ground, but also off-terrain. The powerful, electrohydraulic system has a stepless speed control of all functions. With the slim design of the device, passing doors is never a problem. CLAD-LIFT for heavy loads The CLAD-LIFT 785 consists of the following modules: Powerful front-wheel drive ensures best handling, both indoors and outdoors. Both front drive wheels are equipped with electronic brakes. The vacuum pump with "Power Save", ensures saving battery resources. Sophisticated protection against overloading for maximum safety: If 90% of the maximum load is...

The CLAD-LIFT 600 is designed to handle glass, windows, panels, doors or other elements up to 600 kg in weight with great efficiency. This vacuum lifting device with hydraulic telescopic beam enables the operator to rotate the workpiece by 360 ° vertical and 180 ° horizontal. The front driven CLAD-LIFT 600 with its polyurethane foam filled wheels is extremly manoeuvrable, not only on levelled ground, but also off-terrain. The powerful, electrohydraulic system has a stepless speed control of all functions. With the slim design of the device, passing doors is never a problem. Flexible like the 350 - more powerful drive The CLAD-LIFT 600 consists of the following modules: Powerful front-wheel drive ensures best handling, both indoors and outdoors. Both front drive wheels are equipped with electronic brakes. The vacuum pump with "Power Save", ensures saving battery resources. Sophisticated protection against overloading for maximum safety: If 90% of the maximum load is...

This CLAD-LIFT with a load bearing capacity of 575 kg can be used for big multi-glazed windows. It`s very easy to mount these heavy windows. The CLAD-LIFT 575 is designed to handle glass, windows, panels, doors or other elements up to 575 kg in weight with great efficiency. This vacuum lifting device with hydraulic telescopic beam enables the operator to rotate the workpiece 180° vertically and 180 ° horizontally via the hydraulic system. The front driven Clad-Lift 575 with its polyurethane foam filled wheels is extremly manoeuvrable, not only on levelled ground, but also off-terrain. The powerful, electrohydraulic system has a stepless speed control of all functions. With the slim design of the device, passing doors is never a problem. More potentials: lifting up to 575 kg The CLAD-LIFT 575 consists of the following modules: Powerful front-wheel drive ensures best handling, both indoors and outdoors. Both front drive wheels are equipped with electronic brakes . The vacuum...

One person can lift windows and glass doors up to 350 with the CLAD-LIFT 350. Functionality and characteristics The CLAD-LIFT 350 is designed to handle glass, windows, panels, doors or other elements up to 350 kg in weight with great efficiency. This vacuum lifting device with hydraulic telescopic beam enables the operator to rotate the workpiece by 360 ° vertical and 180 ° horizontal. The front driven Clad-Lift 350 with its polyurethane foam filled wheels is extremly manoeuvrable, not only on levelled ground, but also off-terrain. The powerful, electrohydraulic system has a stepless speed control of all functions. With the slim design of the device, passing doors is never a problem . The CLAD-LIFT 350 consists of the following modules: Powerful front-wheel drive ensures best handling, both indoors and outdoors. Both front drive wheels are equipped with electronic brakes. The vacuum pump with "Power Save", ensures saving battery resources . Sophisticated...

Applications: - Excimer Laser-Lift-Off using line-beam systems - Laser drilling and ablation using scanner systems or mask projection - Laser engraving of optical materials - Materials: polymers, polymer compounds, glass materials

RATEC magnetic strips for the quick and clean formation of chamfers, drip moulds or dummy joints. Our strips are made of high quality steel (some encased in rubber) with built-in magnets. This means that screwing or welding on the table or on the formwork can be omitted.

The quick and economical shuttering adapters from RATEC allow for efficient and safe fixing of shuttering elements. Our adapters feature integrated Pro-Magnets and can be combined to make the perfect addition to any shuttering system, for example for recesses, additional upstands in every corner or for fixing insert parts. Find out for yourself what our multitalents can really do. We would also be happy to develop individual adapter solutions for you.

The Assfalg Battery Electro-Permanent Lifting Magnetic Beam EPMBL has a compact design. Due to the integrated rechargeable battery box, a power connection is no longer required. The EPM Battery Magnetic Lifting Beam is operated by remote control. The load lifting beam with a max. load of 1,500 kg is equipped with magnetic modules and can thus safely move sheet metal formats from a minimum length of 500 mm to a maximum length of 4,000 mm.

Electromagnets for slabs, sheet steel in packs or single pieces, rectangular metal blanks, tubes in packs.High reliability and durability of the winding / Stability of lifting parameters in the operating process / Special design is available for operation in underwater conditions / Heat-resistant version (cargo temperature up to 650°C). Compatible equipment: Cranes / Spreader beams. Aluminium coil