Level indicator - Import export

The BM26A-1000 is a magnetic level indicator (MLI) for basic liquid applications. The cost-effective level indicator is particularly suitable for continuous level measurement in water storage tanks, condensate receiver tanks as well as wash and surge tanks for fuels, lubricates, additives or similar chemicals. The level indicator features a rugged metallic design with the magnetic flaps housed in an IP68 rated, hermetically sealed glass tube. It provides a highly visible local level indication. There is absolutely no power supply needed. However, in applications with more advanced signal output requirements, the MLI can be easily equipped with optional reed switches or a reed-chain level transmitter providing analogue or digital output signals.

Cleaning covers Filter and breather filter Level indicators Oil level gauges Plunge heater

Planters made from stone fibre slabs, in standard and custom shapes and sizes with overflow and, as required, with reinforcement fitted with adhesive and screws. On request, available with automated irrigation unit and water level indicator.

Optigreen Aluminium Planter for installation outdoors on roof areas or in earthbound open spaces and for installation indoors. Planter made from aluminium in standard and custom sizes with overflow, insulating cladding, and, where required, with welded junction plates as reinforcement. On request, available with automated irrigation unit and water level indicator.

The automatic towel roll dispenser celtex® sensor has a viewing window for filling level indication. The dispenser automatically cuts Airlaid as well as tissue. celtex® sensor consists of plastic and is lockable. Possible adjustments: time delay for paper feed and paper length. It is suitable for Airlaid tissue-towel rolls up to a max. width of 200 mm and a diameter of 200 mm. The dispenser is available in white and black.

The automatic towel roll dispenser celtex® sensor has a viewing window for filling level indication. The dispenser automatically cuts Airlaid as well as tissue. celtex® sensor consists of plastic and is lockable. Possible adjustments: time delay for paper feed and paper length. It is suitable for Airlaid tissue-towel rolls up to a max. width of 200 mm and a diameter of 200 mm. The dispenser is available in white and black.

The slim folded towel dispenser celtex® L -slim consists of plastic. The lockable dispenser has a filling level indicator. celtex® L – slim is suitable for all commercially available folded towels in z-fold, quire fold and interfold. It holds between 250 and 500 sheets. The dispenser is available as white, black and chromed model.

The slim folded towel dispenser celtex® L -slim consists of plastic. The lockable dispenser has a filling level indicator. celtex® L – slim is suitable for all commercially available folded towels in z-fold, quire fold and interfold. It holds between 250 and 500 sheets. The dispenser is available as white, black and chromed model.

The slim folded towel dispenser celtex® L -slim consists of plastic. The lockable dispenser has a filling level indicator. celtex® L – slim is suitable for all commercially available folded towels in z-fold, quire fold and interfold. It holds between 250 and 500 sheets. The dispenser is available as white, black and chromed model.

The hand towel rolls dispenser celtex® autocut has a viewing window for filling level indication. The dispenser automatically cuts Airlaid, as well as tissue rolls. celtex® autocut consists of plastic and is lockable. It is suitable for Airlaid and tissue hand towel rolls up to a maximum width of 220 mm and a diameter of 200 mm. The length of the towels is 280 mm. This dispenser is available in white and black.

The hand towel rolls dispenser celtex® autocut has a viewing window for filling level indication. The dispenser automatically cuts Airlaid, as well as tissue rolls. celtex® autocut consists of plastic and is lockable. It is suitable for Airlaid and tissue hand towel rolls up to a maximum width of 220 mm and a diameter of 200 mm. The length of the towels is 280 mm. This dispenser is available in white and black.

The B 400 combines great evaporation performance with economical continuous operation in a sturdy housing. Thanks to the permanent rotation, the air is effectively washed and at the same time humidified before being evenly distributed back into the air in the room without condensation, by means of a 2-speed fan. The B 400s quiet-running synchronous motor enables even large rooms to be humidified without running up large electricity bills. B 400 Benefits in practice: Clearly designed operating panel with hygrostat and fan control and level indicators Rotating evaporation fleece cleans and washes the air 2-speed fan Automatic power-off Adjustable vent grid Robust, powder-coated sheet steel construction With built-in brace for optimal air circulation

The cement stored in the cement silos can be quickly discharged to the cement trailers (bulk carrier) by means of ELKON telescopic cement loading bellow. This system has a special structure with support legs allowing the bulk carrier parking under the discharge point and is equipped with a suitable bellow for feeding the material. ELKON telescopic cement loading bellow is equipped with level indicator to stop loading and lift up the bellow when it is in contact with the cement (material filling process is finalized). The bellow is also equipped with fan filter system to prevent powder during the material filling process. The system includes a control panel as well.

The trak | uplift save battery is a lead-acid traction battery optimized for use in dusty and harsh environments. It has a robust battery trough with cover, which protects the battery from contamination and violent damage. The water refill system trak | aquafill and the electrolyte level indicator trak | aquacheck, which are fitted as standard, can significantly reduce water refill intervals and costs. In combination with a HOPPECKE trak | charger HF premium charger, virtually maintenance-free operation can be achieved. trak | uplift save is particularly suitable for rental stores and tough operating conditions.

OIL HEATER FAN IDE 80Our most powerful indirect oil heating fan IDE 80 is our recommendation for construction sites, halls, agriculture and workshops! So much hot air for so little money — this is the successful concept of the IDE series which also applies to its currently largest member. The oil heater fan IDE 80 has a heating capacity of 80 kW setting new standards for its own class as well as for heating at construction sites, in workshops and halls as well as in agriculture. The optional flue gas discharge allows flexible use of the indirect-fired oil heater fan IDE 80 for heating enclosed spaces. The IDE 80 is then fired with diesel or fuel oil. Continuous fuel supply to the stainless steel combustion chamber is regulated by means of a high-quality Danfoss injection pump. Among the further assets are the easily accessible, external fuel filter as well as the possibility to easily read the remaining fuel volume at the filling level indication integrated in the tank.

OIL HEATER FAN IDE 30Flexible all-rounder for a wide range of heating applications: the ultramobile oil fan heater IDE 30 If you are looking for an equally cost-effective and reliable oil heating solution with clean, dry, warm air for the flexible heating of workshops, storage and production zones, construction sites or halls, the compact oil heater fan IDE 30 is our best recommendation. Owing to its durable housing made of doubly coated material, this indirectly fired oil heater fan is optimally prepared for outdoor heating applications and can further be used for heating closed rooms when applying the optionally available flue gas discharge. The firing of the IDE 30 can variably be made with diesel or fuel oil, the constant supply of which is ensured by a high-quality Danfoss injection pump. The external fuel filter enables an easy access and the current amount of fuel can conveniently be read from the integrated tank filling level indication.

IDS 20 D Oil Fired Direct Heater The IDS 20 D shows mobile heating power with 100 % effectiveness - exactly where you need it. It is completely made in Europe and it is the perfect fit for heating stables with high air flow or construction sites in the winter. Convincing practical advantages: Integrated oil burner with Danfoss® pump Electronic flame safeguard Overheat thermostat Stainless steel combustion chamber Fully automatic aftercooling Double-walled housing for optimal soundproofing and noise insulation Integrated fuel tank Available accessories: External thermostat for fully automatic operation Tank level indicator (available on request) Oil filter filler neck (available on request) More technical data of the IDS 20 D: Heating capacity: 20 kW Air flow: 350 m³/h Input voltage: 230 V / 50 Hz Current consumption: 1 A Fuel consumption max.: 2.04 l/h Tank capacity: 17 litres Length x width x height: 720 x 300 x 450 mm Weight: 20 kg

Fully automatic operation cutting of aluminium and non-ferrous metal NC Control with touch screen display 5,7” Piece counter showing target/actual number of pieces Piece multiplier when cutting bundles Indication of cycle time Multiple feed device – max feed 3.250mm Table separation before the saw blade retracts so the profile is not touched by the saw blade Electronic material feeder, ball screw spindle and servo motor incl. pneumatic horizontal and vertical clamps Float mounting feeder to balance bend profiles Waste piece from 85mm Reducer of clamping pressure horizontal and vertical Cycle spray mist device with level indicator and automatic stop Cut-off length from 3mm Automatic cut-out when bar is finished Technical Data: Motor up to 18,5kW, S 6 40%, 400 V, 50 Hz, 2850 R.P.M. r.p.m. infinitely adjustable Saw blade speed 3.500 – 5.800 R.P.M Saw blade Ø 400mm Profile width max 200mm height max 120mm

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A heater is optionally available with which the temperature range can be extended to +100°C. Minichillers are...

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A heater is optionally available with which the temperature range can be extended to +100°C. Minichillers are...

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints, only requiring 225 x 360 mm on the laboratory bench and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A 1 kW heater is optionally available with which the...

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints, only requiring 225 x 360 mm on the laboratory bench and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A 1 kW heater is optionally available with which the...

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints, only requiring 225 x 360 mm on the laboratory bench and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A 1 kW heater is optionally available with which the...

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints, only requiring 225 x 360 mm on the laboratory bench and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A 1 kW heater is optionally available with which the...

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A heater is optionally available with which the temperature range can be extended to +100°C. Minichillers are...

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A heater is optionally available with which the temperature range can be extended to +100°C. Minichillers are...

Whether you want to reliably keep construction zones warm, effectively heat larger halls, protect your livestock from the cold or keep your work material free of ice despite low temperatures: with 100 kW of direct heating power the IDE 100 D provides a high heating capacity for every demand with 100 % efficiency. The integrated oil burner of this heating device can be fuelled by either diesel or fuel oil. The continuous fuel supply to the stainless steel combustion chamber is regulated by means of a high-quality Danfoss® injection pump. Safe operation of the oil heater fan is ensured by an electronic flame trap and an integrated overheating protection. Among the further assets are the easily accessible, external fuel filter as well as the possibility to easily read the remaining fuel volume at the filling level indication integrated in the tank.

The B250 is a completely electronically controlled disc humidifier that is fitted with an electonic sensor, which permits indicates the level of moisture in the air. Just configure the humidistat to the desired humidity, the one that’s right for you and the application and allow the completely electronic controlled unit do the rest. It is extremely nice to possess something that offers great dependability. The key lock is an extra feature that is purposed to provides added peace of mind. Simply input your exclusive combination to lock the units keypad and avoid unauthorized use, tampering or accidental access that may change the overall settings. Owing to the phrase used in Germany "trust is good, control is better" The B250 has a water level gauge that is located in the operational panel. Furthermore, there is no need stress about the unit going up in smoke of short circuiting.

This type enables reactive hot-melt adhesives, such as Polyurethane (PUR) or Polyolefine (POR) from aluminium cartridges to be processed. It is also possible to work horizontally or overhead. The devices are equipped with an innovative level control to provide information on the fill level in the cartridge.