Lead-free - Import export

The PERFECT cable gland made of lead-free brass is the perfect cable entry solution for many industrial applications. Features: — in compliance with RoHS — integrated anchorage for cables — protection against twisting — wide sealing and clamping range — for cables from 3 to 48 mm — easy-to-install — temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short term) — protection grade IP68 - 5 bar / IP69 — test certificates VDE / UL / DNV in preparation — many variations and accessories available

The PERFECT EMC-cable gland made of lead-free brass is the perfect cable entry solution for shielded cables to ensure trouble-free operation of electrical devices and systems. Features: — in compliance with RoHS — quick and easy EMC Connection — integrated anchorage for cables — wide sealing and clamping range — for cables from 3 to 48 mm — temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short term) — Protection grade IP68 - 5 bar — Test standard UL 514B

Lead-free - According to (RoHS) 2002/95/EG Standards and Certificates TR d1 xP: TR d1 xP: Ordering number RGAS-JTRM-20x8P4 Inquiry RGAS-JTRM-20x4P4 Inquiry RGAS-JTRM-10x2P4 Inquiry Lead-free - According to (RoHS) 2002/95/EG Standards and Certificates

Lead-free - According to (RoHS) 2002/95/EG Standards and Certificates d1 [mm]: Drylin® - Product overview DryLin® - System selection & Lifetime calculation Anti-backlash lead screw nut assembly d1 [mm]: Lead-free - According to (RoHS) 2002/95/EG Standards and Certificates

Lead-free - According to (RoHS) 2002/95/EG Standards and Certificates Leadscrewsstorage Anodized aluminum bearing blocks of iglidur® L250. Design your own linear table. Leadscrewsstorage Single start trapezoidal lead screw Two start trapezoidal lead screw L = Length TR = thread outer diameter m = pitch Leadscrewsstorage Anodized aluminum bearing blocks of iglidur® L250. Design your own linear table. Leadscrewsstorage Single start trapezoidal lead screw Two start trapezoidal lead screw Lead-free - According to (RoHS) 2002/95/EG Standards and Certificates

Lead-free - According to (RoHS) 2002/95/EG Standards and Certificates Trapezoidal leadscrew nut - WSRM d1 [mm]: Trapezoidal leadscrew nut - JSRM Trapezoidal leadscrew nut - J350SRM Trapezoidal leadscrew nut - A180SRM igus® offers a wide selection of suitable trapezoidal leadscrew spindles. drylin® - Trapezoidal threaded spindle Trapezoidal leadscrew nut - WSRM d1 [mm]: Trapezoidal leadscrew nut - JSRM Trapezoidal leadscrew nut - J350SRM Trapezoidal leadscrew nut - A180SRM igus® offers a wide selection of suitable trapezoidal leadscrew spindles. drylin® - Trapezoidal threaded spindle Lead-free - According to (RoHS) 2002/95/EG Standards and Certificates

Plain Bearing

Epoxy fibre-glass FR4 1.50 mm Double-sided 35 µm Cu Hot Air Leveling (HAL lead free) Solder practice board for 11 different SMD components: 6x SO8 8x SO14 4x SO16w 4x SOT223-3 4x SO20 4x SOT89 22x SOT23 78x 1206 66x 0805 26x 1812 20x 2220 Size: 72.00 x 213.00 mm

Epoxy fibre-glass, FR4 1.50 mm Single-sided 35 µm Cu Hot-tinned (HAL lead free) Solder stop mask One 40-pole connector for Raspberry Pi 21 x 32 holes Ø 1.00 mm Hole matrix field with 2.54 mm grid and 13 x 28 solder pads Ø 2.20 mm Two potential strips Four pick-up holes, Ø 2.75 mm 85.00 x 56.00 mm

Epoxy fibre-glass, FR4 1.50 mm Double-sided, 35 µm Cu Plated through holes (PTH) Hot-tinned (HAL lead free) Solder stop mask One 40-pole connector for Raspberry Pi 21 x 32 holes Ø 1,00 mm Hole matrix field with 2.54 mm grid and 13 x 28 solder pads Ø 2.20 mm Two potential strips Four pick-up holes, Ø 2.75 mm 85.00 x 56.00 mm

Laboratory board for Arduino applications Epoxy glass hard fabric FR4 1.50 mm Two-sided 35 µm Cu Plated-through (PTH) Hot tinned (HAL lead free) Hole matrix field in 2.54er raster Bored Ø 1.10 mm Soldering islands 2.20 x 2.20 mm 4 Potential paths Placement print for the following components: 8-bit AVR micro controller ATmega328P Serial connection USB connection Size 100.00 x 160.00 mm

Our fully automated winding centres for fine and self-bonding wire make us the perfect partner for any tasks you require. Our coils are tinned with lead-free coatings (RoHS). At PRUFREX, single-chamber and multi-chamber coils can also be achieved using two-wire windings. For specific magnetic flux requirements, we apply wires of different thicknesses to the coil form. Two different wire thicknesses, from 0.045 to 0.71 millimetres, on coil forms with press-in ferrite or metallic cores.

Raspberry Pi accessory kit for an analogue to digital converter board Epoxy fibre-glass, FR4 1.50 mm Double-sided, 35 µm Cu Plated through holes (PTH) Hot-tinned (HAL lead free) Solder stop mask One 40-pole connector for Raspberry Pi 21 x 32 holes Ø 1,00 mm Hole matrix field with 2.54 mm grid and 13 x 28 solder pads Ø 2.20 mm Two potential strips Four pick-up holes, Ø 2.75 mm Analogue 8-channel voltage meter with input voltage range of 0 to 3.3 V 85,00 x 56,00 mm

Raspberry Pi accessory kit for a UART to USB converter board Epoxy fibre-glass, FR4 1.50 mm Double-sided, 35 µm Cu Plated through holes (PTH) Hot-tinned (HAL lead free) Solder stop mask One 40-pole connector for Raspberry Pi 21 x 32 holes Ø 1,00 mm Hole matrix field with 2.54 mm grid and 13 x 28 solder pads Ø 2.20 mm Two potential strips Four pick-up holes, Ø 2.75 mm For direct connection and control of a Raspberry Pi by computer 85,00 x 56,00 mm

Stackable DIP Euroboard for Raspberry Pi applications Epoxy glass hard fabric FR4 1.50 mm Double-sided 35 µm Cu Hot tinned (HAL lead free) Solder stop mask One 40-pole connector for Raspberry Pi Second 40-pole connector for optional linking an additional lab board Plated through holes bores with Ø 0.90 mm Hole matrix field with 2.54 mm grid with 1651 solder pads 2.00 x 2.00 mm Not plated through holes bores with Ø 1.00 mm 4 potential strips Size 100 x 160 mm

Our fully automated winding centres for fine and self-bonding wire make us the perfect partner for any tasks you require. Our coils are tinned with lead-free coatings (RoHS). We can wind onto any desired coil form using many different press-in ferrite and metallic cores. Multiple tap coils are also possible. Pins are automatically applied to the coil connections during the winding process, with wire drawing electrically controlled. Our winding machines handle single-chamber and multi-chamber coils with wire thicknesses from 0.045 to 0.71 millimetres.

Our fully automated winding centres for fine and self-bonding wire make us the perfect partner for any tasks you require. Our coils are tinned with lead-free coatings (RoHS). To manufacture self-supporting coils, we use self-bonding wire. During winding, the surface of the wire is bonded using hot air. To ensure the coil connections can be soldered, they are then stripped of insulating enamel using a fully automated milling process. PRUFREX is able to make air core coils with wire thicknesses from 0.045 to 1.6 millimetres.

SPIROL's Series LP500 Latch Pins for Plastics are designed with a barb located under the head with a barb length equal to the width of the outermost section of the assembly. The remaining length of the LP500 Latch Pin is smooth without any other retention features. This allows the LP500 Latch Pin for Plastic to easily align and freely install through all of the holes with a plastic assembly until the barb makes contact with the final hole to securely lock the pin in place. Once fully installed, the handle will pivot freely around the non-barbed end of the stationary pin. The head prevents the LP500 Latch Pin from being over-installed, and enables the pin to be mechanically oriented for automatic installation. Manufactured from lightweight, lead free aluminium, SPIROL's LP500 Latch Pins for Plastics are available in three standard diameters: 3mm, 4mm and 5mm.

SPIROL's BP100 Press-N-Lok™ Pin has opposing barbs on each end of the pin and is designed to permanently retain two plastic components to each other such as two halves of a plastic enclosure. Press-N-Lok™ Pins are installed in two stages: First, press the pins into one half of the plastic housing. Next, align the other half of the housing with the exposed pins and press into place. During installation, the plastic will backfill into the area around the barbs resulting in maximum resistance to axial force. SPIROL's Press-N-Lok™ Pins are manufactured from lightweight, lead free aluminium as a standard, and available to order in austenitic stainless steel. BP100 Press-N-Lok™ Pins are available in diameters ranging from 2mm to 4mm.

Main products: Leaded brass, brass, lead-free free-cutting brass, copper, tin bronze, chrome-zirconium copper Product characteristics: High electrical conductivity, thermal conductivity, good strength and hardness, heat resistant, wear resistant and deformation resistant Applications: Aerospace, automobile manufacturing, communication technology, precision processing, household appliances, hardware, welding materials Production capacity: 207,000 tons Honorary titles: China's Top 10 Copper Wire & Rod Company, Zhejiang Famous Brand Product

Suitable for priming any wood indoors and outdoors. Highly water-repellent, open-pore, deep penetrating impregnation primer for highly strained surfaces like furniture, work tops, wooden decks in damp areas, wood and cork floors and for curing of surfaces and lead-free drying agents.

This cable has been manufactured for audio engineering only but these cables are also suitable in areas of houshold appliances such as very flexible network-connecting cable appliances. GLOBALFLEX®-SOFT is very ductile and is very easy to handle due to the improved talcum effect. The outer sheath is lead-free and offers contitional abrasion as well as conditional oil and UV-resistance.

THE EFFECT: Lead compounds are added to the fuel in order to prevent engine pinking and valve damage. Older cars therefore have to run on leaded fuel some or all the time. THE ADVANTAGES AT A GLANCE: - Forms a protective layer on the valve heads and valve seats - Protects outlet valves against wear - Works against deposits on valves and sparking plugs - Protects the environment by lead-free operation ERC Lead Substitute is designed for regular application and for all grades of unleaded petrol. Dosing 1:1000/concentrate (e.g. content of 250ml-dosing bottle is sufficient for 250 liters petrol fuel).

SANHA produces capillary fittings of the series PURAFIT® - just like our press fittings PURAPRESS® - from the completely lead-free premium material silicon bronze CuSi. This copper alloy is optimally adapted for the use in drinking water systems as it fulfills the strict legal requirements of the Drinking Water Directive. By using lead-free PURAFIT® capillary fittings, installers can always be certain that they will not be subject to any legal claims in case the lead tolerances are exceeded. Also, lead-free fittings satisfy the market's desire for safe and healthy drinking water installations. PURAFIT® capillary fittings from CuSi are tested and certified by all relevant national and international certification bodies and can be used for a wide variety of applications in the sanitary and heating industry

3fit System press fittings made of lead-free silicon bronze CuSi for use in a system with MultiFit®-Flex and MultiFit®-PEX multi-layer plastic pipes by SANHA according to DVGW W 542 (for drinking water and heating installations) as well as copper pipes. More information on the adequate pipes under "Safe connection" below. The 3fit®-Press system is approved according to DVGW W 534.

TITANIUM The new generation of wave soldering systems – lead free soldering without corrosion. TITANIUM is the innovative soldering solution developed by STRECKFUSS SYSTEMS. It uses titanium, an agent which is extremely lead free solder resistant. For this reason, titanium works perfectly in lead free soldering processes. An oxide film immediately covers all material damages and thus prevents corrosion. In contrast to wave soldering systems with stainless steel components, titanium is not subject to corrosion even when lead free solder is used. By means of a simple and safe solder bath exchange, TITANIUM makes it possible to switch flexibly from a standard soldering process to lead free production. This ensures maximum flexibility at minimum costs and easy handling. TITANIUM is a complete system and includes: Spray fluxer with extraction hood Double wave 3- D wave (for the prevention of solder bridges) Infrared preheating Microprocessor controls Soldering frame transportation system

PVC is a sustainable, durable plastic. The classic material for pneumatic tube systems, today made from lead-free PVC-U, comes with the advantages of low weight and easy handling. Our warehouse stocks the largest range of dimensions, colours and bend radii.

PVC is a sustainable, durable plastic. The classic material for pneumatic tube systems, today made from lead-free PVC-U, comes with the advantages of low weight and easy handling. Our warehouse stocks the largest range of dimensions, colours and bend radii.

Our fittings high quality is based on: – Patented design brass fitting, with EPDM O-rings and inox sleeves – Manufactured under the technical standards DIN 50930-6 and UNE EN ISO 21003-3 – Compatible with multilayer pipes – Our fittings are compatible with several jaw profiles: Serie 7 (DN40, DN50, DN63 mm) – TH, U Serie 2 (DN63, DN75 mm) – U – Lead free brass available on request – Fittings starting by article code 2, with not fixed sleeve