Results for
ERDWICH ZERKLEINERUNGS-SYSTEME GMBH
Germany
According to initial estimates, in Germany about three million LCD monitors will be recycled in the year 2016. However, they often still have backlighting containing mercury and therefore have to be classified as “hazardous waste” in accordance with the German General Administrative Regulation (AVV) and registered in compliance with the German Electrical and Electronic Equipment Act (Elektro G) under category 3. Whereby special conditions must ensure that no risk arises from the mercury for the environment or for humans. However, because of a lack of suitable automated procedures for the recycling of LCD monitors, it was to date only possible to dissemble the appliances laboriously by hand, with the ensuing health dangers for the workers. For this, ERDWICH now offers two alternatives which are both safe and time-saving for recycling LCD monitors. Mercury and valuable resources can be removed and recycled in an environmentally sound way in the future: 1. Monitor sawing plant for...
Request for a quoteSTRATE TECHNOLOGIE FÜR ABWASSER GMBH
Germany
The recording of operating data such as flow volumes, pumping pressure, operating hours and power consumption of the pumps etc. is essential for the state monitoring of – usually municipal – pumping stations and pressure line as well as for the diagnosis of machine components. Data recording system with LCD display for the electronic acquisition, display, recording, evaluation, remote transmission and archiving of up to 6 analogue and digital input signals. Product features For daily, monthly, annual evaluation; meter statuses, operating times and volumes; min., max. and mean value recording Multi-colour display, digital, bar chart and graph representation Archiving in the internal memory and on compact flash card (no data lost in the event of a power failure!) Remote data transmission via standardised interfaces Suitable for door installation in the AWAcontrol control cabinet
Request for a quoteSIKO GMBH
Germany
Display accuracy max. 10 μm. Repeat accuracy max. ±0.01 mm. Lowest-power LCD. Reading distance ≤2 mm. Incremental measurement and reset function. Direct reference/offset value input. Hard-wired sensor.
Request for a quoteSIKO GMBH
Germany
Display accuracy max. 10 μm or 1/64 inch. Repeat accuracy max. ±0.01 mm. Low-power LCD with decimal and fraction-inch function. Reading distance ≤2 mm. Battery-buffered memory. Battery operation. Works with receiver module RTX500.
Request for a quoteSIKO GMBH
Germany
Display accuracy max. 10 μm. Repeat accuracy max. ±0.01 mm. High-contrast LCD, 12-digit LCD dot matrix. Incremental measurement and calibration function. Direct reference/offset value input. Calibration input. Works with sensor MSA. Option: serial interface RS232/RS485. Option: TG01 bench housing.
Request for a quoteSIKO GMBH
Germany
The MA508/1 magnetic display is the optimized successor of the MA508 magnetic display. Now, the magnetic display can be freely programmed via the integrated keyboard, for example for parameters such as resolution or offset.The compact dimensions enable simple constructive integration even under confined installation conditions. The metal housing guarantees durability and robustness. Display accuracy max. 0.01 mm. Repeat accuracy 0.01 mm. Low-power LCD with integrated sensor. Supply via integrated battery with up to 10 years of service life. Freely programmable directly via buttons on the device.
Request for a quoteSIKO GMBH
Germany
Display accuracy max. 10 μm. Repeat accuracy max. ±0.01 mm. Lowest-power LCD. Metric or decimal-inch indication. Incremental measurement and reset function. Direct reference/offset value input. Battery-buffered memory. Battery operation. MS500H sensor pluggable.
Request for a quoteSIKO GMBH
Germany
Display accuracy max. 10 μm. Repeat accuracy max. ±0.01 mm. Freely programmable high-resolution LCD dot matrix display. Battery-buffered memory. Hard-wired sensor. Option: serial RS485 interface.
Request for a quoteSIKO GMBH
Germany
Max. display accuracy 10 μm or 1/64 inch. Repeat accuracy max. ±0.01 mm. Low-power LCD with decimal and fraction-inch function. Reading distance ≤2 mm. Incremental measurement and reset function. Direct reference/offset value input. Battery-buffered memory. Battery operation. MS500H sensor pluggable.
Request for a quoteSIKO GMBH
Germany
Display accuracy max. 10 μm. Repeat accuracy max. ±0.01 mm. High-contrast LCD, 12-digit LCD dot matrix. Incremental measurement and reset function. Direct reference/offset value input. Reference input. Programmable actual-value memory. Works with sensor MS500. Option: serial interface RS232/RS485. Option: 2 measurement channels. Option: TG01 bench housing.
Request for a quoteMANUFAKTUR VON DOBERSTEIN
Germany
Universally applicable in the interior, whether private or business, just gorgeous the possibilities of displaying images and text, the special wafer-thin LCD screen is designed so that a crystal-clear picture experience awaits you. A stainless steel water wall with a glass surface as a drain, via touch screen, the performance of the pump can be varied as needed, So a quick flow of water or a slower. Integrated into the water wall is a specially designed TV with sound, with all sorts of functions. You can watch TV, watch videos, surf the Internet, anything you can do with a standard TV. For a non-binding offer or open questions, we are happy to help and advice. Just call us on our hotline: 08681/2490020 or write us an E-Mail to: info@manufaktur-von-doberstein.de our consultants are looking forward to you!
DISPLAY ELEKTRONIK GMBH
Germany
We offer a variety of Graphic-modules starting from 120 x 32 dots to 320 x 240 dots (1/4 VGA). Most of our modules operate within the wide temperature range (-20°C to +70°C). Depending on the multiplex rate we have designed several models in STN and FSTN technology. For the backlight we use LED, EL or CCFL depending on type of color, quality, lifetime and price. Different kind of technologies are possible: COB is available for most modules using backlight. COG is recommended for applications where space is limited. New technical concepts allow us to achieve wide temperature range modules without price increase. Most of our products are available from stock. If you do not find any product which can fit into your application we have the capability to manufacture customized- or semicustomized designs also at low volumes and an economical price level.
Request for a quoteDISPLAY ELEKTRONIK GMBH
Germany
Most of our modules operate within the wide temperature range (-20°C to +70°C) without negative voltage. A contrast-voltage of ~ 4,5 Volt is required (against Vdd). The twist of 240° results in excellent contrast and improved viewing cone. We use a 16pin version PCB with optional pins for the LED-backlight (A/K). Our modules have LED-limit-resistances already on board. These resistors can be changed or bridged easily. If neccessary, the power consumption and brightness can be optimized as per customer's request. The metal bezel is set on ground. If neccessary, our PCB is prepared for disconnection. In addition to our wide range of alphanumeric modules in standard STN technology, we have recently introduced
Request for a quoteDISPLAY ELEKTRONIK GMBH
Germany
Most of our LCD-panels operate within the wide temperature range (-20°C to +70°C). For the static types the Vlcd is ready for 3Volt. For most of our MUX-displays, we offer a 3Volt and a 5Volt model. Most LCD-panels are available in reflective and transflective version. In general, we offer a standard pinlength, but for the highrunners we also have different pinlengths from stock. Please ask us in case you want a different pinlength. For the LCD-panels without pins, we also offer elastomeric connectors (zebras). For outdoor applications (e.g. fuel stations, automotive), we offer suitable LCD-displays (extreme wide temperature range, UV-stability etc.) New technical concepts allow us to achieve wide temperature range LCD-panels without price increase. Most of our products are available from stock. If you do not find any product which can fit into your application, we have the capability to manufacture customized- or semicustomized designs also at low volume
Request for a quoteDISPLAY ELEKTRONIK GMBH
Germany
We offer a range of 7-Segment-Modules (Digital-Modules) with integrated driver IC. Some of these products are ready for use as a full operating voltmeter. You can also use these products for different purposes as a "Multirange Measurement Instrument". Some applications for example are: voltage measurement, current measurement, resistance measurement, AC-voltage measurement, temperature measurement and more. Please refer to the technical information. Most of our products are available from stock. If you do not find any product which can fit into your application we have the possibility to make customized- or semicustomized designs also at low volumes and an economical price level. Most of our products are available from stock. If you do not find any product which can fit into your application we have the possibility to make customized- or semicustomized designs also at low volumes and an economical price level.
Request for a quoteBLAZE DISPLAY TECHNOLOGY CO.,LTD.
Germany
Outline size(mm): 80.00 × 36.00 × 11.00 Viewing Area: 64.50 × 14.50 Active Area: 55.70 × 11.00 Controller IC: ST7066U or Eqv. Interface: Parallel Backlight:LED Remarks: 1×16PIN
Request for a quoteBLAZE DISPLAY TECHNOLOGY CO.,LTD.
Germany
So far, Blaze Display supplied around 10 billion high quality and reliability LCD displays with long life time (around 15 years), super wide operating temperature(from -40℃ to +90℃), and anti UV function for metering industry. Our Metering LCD Displays (LCD Panels, LCD Modules) are widly used for Kwh Meter, Smart meter, Single phase meter, 3-phase meter, Prepayment energy meter, Electric energy meter, Multi-function energy meter, Water meter, Gas meter, Power meter.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BLAZE DISPLAY TECHNOLOGY CO.,LTD.
Germany
Part Number: BDT-T3237-01 ● Display Format: 240 x 320 ● Size: 3.2" ● View Direction:12H ● Interface: MCU ● Built-in Controller: ILI9341V ● Control-Board: No ● Brightness(cd/m²): 200 ● Frame Through Hole: No ● Touch Screen: Optional
Request for a quoteBLAZE DISPLAY TECHNOLOGY CO.,LTD.
Germany
Part Number: BGB320240-02 ● Graphic LCD 320 x 240 (dots) ● FSTN-Gray / STN-Gray / STN-YG / STN-Blue ● Built-in controller ((RA8835 or Equivalent) ● +3.3V / +5.0V power supply ● 1/240 duty, 1/17bias ● Viewing Direction: 6H / 12H ● Interface: 6800/8080 8-bit parallel ● Backlight (Side LED): White / Green / Blue / Yellow-Green / RGB / Orange / Amber ● Temp: N.T / W.T / Super W.T
Request for a quoteBLAZE DISPLAY TECHNOLOGY CO.,LTD.
Germany
Part Number: BGB240128-02A ● Character LCD 240 x 128 (dots) ● FSTN-Gray / STN-Gray / STN-YG / STN-Blue ● Built-in controller ((RA6963 or Equivalent) ● +3.3V / +5.0V power supply ● 1/128 duty , 1/12bias ● Viewing Direction: 6H / 12H ● Interface: 8080 8-bit parallel ● Backlight (Side LED): White / Green / Blue / Yellow-Green / RGB / Orange / Amber ● Temp: N.T / W.T / Super W.T
Request for a quoteBLAZE DISPLAY TECHNOLOGY CO.,LTD.
Germany
Part Number:BGB12864-09A ● Character LCD 128 x 64 (dots) ● FSTN-Gray / STN-Gray / STN-YG / STN-Blue ● Bulit-in controller ((NT7108C or Equivalent) ● +3.3V / +5.0V power supply ● 1/64 duty , 1/9bias ● Viewing Direction: 6H / 12H ● Interface: 6800 4/8-bit parallel ● Backlight (Side LED): White / Green / Blue / Yellow-Green / RGB / Orange / Amber ● Temp: N.T / W.T / Super W.T
Request for a quoteBLAZE DISPLAY TECHNOLOGY CO.,LTD.
Germany
Part No. :BCB2004-03 ● Character LCD 20x4 (5 x 8 dots) ● FSTN-Gray / STN-Gray / STN-YG / STN-Blue ● Bulit-in controller (ST7066U or Equivalent) ● +3.3V / +5.0V power supply ● 1/16 Duty , 1/5 Bias ● Viewing Direction: 6H / 12H ● Interface: 6800 4/8-bit parallel, optional SPI / I2C (RW1063 IC) ● Backlight (Side LED): White / Green / Blue / Yellow-Green / RGB / Orange / Amber ● Temp: N.T / W.T / Super W.T ● Fonts: English-Japanese / English-European / English-Cyrillic (Russian)
Request for a quoteBLAZE DISPLAY TECHNOLOGY CO.,LTD.
Germany
Outline size(mm): 80.00 × 36.00 × 8.00 Viewing Area: 66.00 × 16.00 Active Area: 60.70× 11.57 Controller IC: ST7066U or Eqv. Interface: Parallel Backlight:LED Remarks: 16×2PIN
Request for a quoteResults for
Lcds - Import exportNumber of results
24 ProductsCountries
Company type