Iron materials - Import export

The RH line is equipped with a hand wheel and a scale ring with a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, also be furnished with a 0.01 mm scale gradation. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RK line is equipped with a cross type handle and, from size 300 on, with a hand wheel. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RM line The RM line is equipped with a knurled micrometer knob of a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, be delivered with a 0.01 mm scale gradation, too. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RE line is equipped with end plates and suits for the attachment of stops, micrometers, cylinders etc. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RA line descripes a roller beared slide in a special sealed version. The standard type is equipped with a gap seal (approx. 0.5 mm). Special types with felt or nylon scrapers are possible, too. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RS line is equipped with a threaded spindle. From size 75 mm on, all dovetail slides (type SS) are equipped with a digital position readout. Different installation options allow to read the display from different viewing directions. The housing consists of shockproof plastic. The digital display allows to make fast adjustments over the complete measuring path. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

Solid wood coffee table made from walnut trunk A solid wood coffee table made of walnut trunk is a masterpiece of nature, each pattern tells a story and is a manifesto of nature's inspiration; This coffee table is an everlasting reminder of the life of the tree. In order to present the tree to you in its purest form, we develop ideas and projects. We work with university art faculties and ensure that our products are handmade by artists. Above all, we are proud to support art students as part of a social project. In short, we produce and create values ​​in the name of our country with the strong combination of arts and crafts. We wanted to develop designs based on the harmony of three basic materials: wood, iron and stone… We wanted all our designs to be handmade and therefore stayed away from industrial manufacturing.

“Epoxy Console with Metal Legs Natural Wood Console Decorative” adds aesthetics and elegance to rooms. The unique harmony of epoxy and wood gives these special consoles a breathtaking design. We develop ideas and projects to present the topic of wood to you in its simplest form. We work with art schools and ensure that our products are made by artists. Most importantly, we are proud to support art students as part of a social project. In short, we produce and create value in the name of our country with the strong connection of art and craft. We wanted to develop designs based on three basic materials: wood, iron and stone… We wanted all our designs to be characterized by handcraft and therefore avoided the industrial approach.

“The dance of epoxy resin with wood is a magical meeting of nature; The warmth of the wood, the transparency of the epoxy resin and the unique harmony of the colors come to life in these specially designed tables, and the history of the tree becomes a reflection of modern art. We develop ideas and projects to present our main topic, the tree, to you in its simplest form. We work with university art faculties and ensure that our products are made by artists' hands. Above all, we are proud to support our art students as part of a social project. In short, we produce and create value on behalf of our country through the powerful combination of arts and crafts. We wanted to create designs based on the harmony of three fundamental raw materials: wood, iron and stone… All our designs are carefully handcrafted as we consciously avoid industrialization.

Scope of application Magnetic filter rod (magnetic rod) is mainly used to remove ferromagnetic impurities in powder, granular and liquid or slurry. It is widely used in ceramics, power, mining, plastics, chemical industry, rubber, pharmaceuticals, food, environmental protection, pigments, dyes, electronics, metallurgy and other industries. Working Principle The magnetic rod is made of high quality stainless steel pipe and high B value rare earth alloy NdFeB, and is made by special manufacturing method. The magnetic filter can be assembled on a fixed frame to form a magnetic filter. When the material containing iron passes through, it is attracted by the magnetic rod, and the material containing iron is firmly adsorbed on the wall of the magnetic rod. To ensure the integrity of equipment and product safety. Product features energyfree, pollutionfree, can be installed in any position on the production line with material contact, saving space, easy installation.

One-part design with brake drum according to DIN 15431 The coupling TSCHAN ® TNM EBT is a torsionally elastic and puncture-proof claw coupling. It balances out angular, radial, and axial shaft misalignments within defined limits. The coupling transfers the torque via pressure loadable, elastic buffers of Perbunan (Pb) which are joined together as an intermediate ring. The elastic intermediate ring can cushion impacts and torsional vibrations; it is oil-tight and electrically conductive. The coupling is usable in every sense of rotation and installation position. TSCHAN ® TNM EBT One part design with brake drum acc. to DIN 15431. Brake drum in nodular cast iron, other materials on request. Elastic intermediate ring in different hardnesses: standard Pb72, hard Pb82. General features Torsionally flexible, compensate for angular, radial and axial shaft misalignment Intermediate rings loaded in compression Elastomers available in various shore hardness degrees Suitable for...

Latest information： Maysun Solar's new limited time winter sale is on! Several European warehouses now have stock in stock!!! Don't hesitate to contact us to enquire and join the pre-order and purchase queue!!! For a quicker response, send a message to maysunsolarmiddleeast@gmail.com Product Number: MS（395-415）MB-54H Power: 410W Solar cell: monocrystalline silicon Cells: 108 cells cut to 1/2 Dimension: 1722 x 1134 x 30mm Weight: 22kg Glass: 3.2mm (0.13inch), Anti-reflective coating, high transmission, low iron content, toughened glass Encapsulation Material: EVA/POE Back: Black Frame: Black anodised aluminium alloy Junction box: IP68 rated Cable: TUV 1*4.0 mm² Portrait:(✚):300mm/(-):300mm Custom length Connector: MC4 Packing: Pallet: 37pcs

The AL-ROCK is a laser hardening system for surface hardening with a self-propelled caterpillar track. The laser can be brought directly to the workpiece. Time-consuming removal of the components to be hardened can often be avoided. The robot arm easily reaches the hard-to-reach places on the workpiece. All common metals can be hardened, e.g. Quenched and tempered steels, cold work steels and cast steel or gray cast iron. The material must have at least 80% pearlite. The degrees of hardness that can be achieved are identical to those of conventional hardening processes. In free 3D movements, the laser beam precisely follows even the most demanding three-dimensional workpiece contours, for example on tracks along closing edges. Pimples, scar structures. Simple points are also not a problem. Only the free access of the laser beam to the surface to be hardened is required. And the AL-ROCK can do even more - on request, the laser robot can also be used for laser welding.

◆High-rigidity continuous 5-axis spindle head ・This machine is equipped with a highly rigid continuous 5-axis spindle head which enables the continuous machining of high-strength materials such as iron, titanium, and difficult-to-cut materials without using axis clamping mechanism ・High-rigidity square 450 mm ram and unique high torque rotating structure gives max. rotating torque of 6600 N・m for B and C axis

Reduce downtime and maintenance requirements with ROXDUR wear products. ROXDUR is a wear plate product that utilises the latest technology to provide a long lasting and durable wear solution suitable for heavy duty and medium duty applications. ROXDUR products can significantly increase the life of your fixed plant equipment. Our innovative manufacturing processes ensure a superior wear product that will save you time and money in the long run. ROXDUR wear plates are designed with the highest quality and years of expertise. Our pre-designed products can also be customised to fit your requirements. ROXDUR uses a unique composite material* that combines extreme hardness to minimise abrasive wear and iron matrix technology to absorb impact. The metallurgical bond between the cemented carbide and iron matrix gives a composite material with very high-quality adhesion to the cemented carbide. *patent pending MATERIAL CHARACTERISTICS Combining extreme hardness with shock resistance

Extremely high structural rigidity together with very fast-acting drives. Reinforced portal, cast side stands, high structural stability. Top surface quality and excellent dynamic response. Ideal for machining steel, cast iron and heavy materials like titanium. Spindle-change concept for economical complete machining. Advantages: - top surface quality - better dynamic performance - high efficiency