Insulation - Import export

Our uninsulated halls offer simple and inexpensive all-round protection for the storage of temperature-insensitive goods. They are ideally suited for storage, roofing of construction sites or for temporary assembly. The areas of application of our uninsulated halls: - Storage for temperature-insensitive goods - protected loading of transporters - protected parking and storage area - Picking for goods of all kinds - Maintenance and repair For your roof and wall covering you can choose between a PVC tarpaulin or a trapezoidal sheet. Made of highly tear-resistant, and durable industrial PVC, tarps are a cost-effective alternative compared to other cladding options.

CSN® Insulator Heaters are used in flue gas cleaning systems for preheating the insulators and as protection of the equipment against condensation and freezing during shutdown periods

High-Temperature insulating hose (HT hose) protects heat-conveying lines and prevents thermal damage to adjoining parts with a fiberglass and double-coated silicon rubber top layer. The HT hose is available as a self-contained or re-closable sleeve as well as a custom-made mat. The approximate surface temperature of the duct can be up to 500°C.

High temperature adhesive tape with onesided aluminum foil suitable for a maximum radiant heat of 1000 ° C

Our insulated brush-holder bolts provide the mounting basis for most leg brush holders and brush holders with clamps. What fits your design? At MACK, we always go into things in depth and talk about the details. We fit our holders on insulated brush-holder bolts, which can be produced individually to special measurements.

The light weight and pliability of aluminum make it easy to work with and can streamline installation. In addition to the weight advantage and ductility, aluminum provides a complete barrier to light, moisture and magnetic waves. Impermeable to all gases including oxygen, aluminum also provides superior fireproofing capabilities for both industrial and residential construction. Aluminum insulation offers good noise reduction properties along with resistance to corrosion and heat. Not only does this improve interior environments, it also increases product life and efficiency. These proven characteristics continue to make aluminum the leader in insulation and the preferred choice for all types of building and construction.

Our OHLER product line is specifically designed for use in automobiles and caravans. Novelis is one of the leading suppliers of flexible tubes and hoses for the automotive sector with products used for heat protection, air ducts, exhaust pipes, thermal insulation and energy absorption.

Our thermally insulated halls are the highest quality solution and offer the best protection for sensitive goods. Thanks to all-round high insulation by means of sandwich elements, these lightweight halls can be used in all areas. The areas of application of our thermally insulated halls: - Storage for sensitive goods - protected parking and storage space - Assembly and commissioning for goods of all kinds - Maintenance and repair - Production and workshop - Sales and exhibition areas Benefit from the excellent heat-insulating and low-maintenance properties of full cladding made of sandwich elements. They consist of two outer shells made of steel and a foam core made of polyurethane or mineral wool, thus ensuring optimum insulation. This means that the energy required to heat the industrial hall can be significantly reduced. As a positive side effect, appropriate noise protection is generated at the same time.

HR-Structures' lightly thermally insulated industrial halls are equipped with Thermoplane roofing and sandwich panel wall cladding. This combination is the smartest solution for slightly temperature-insensitive goods. The areas of application of our lightly thermally insulated halls: - Storage for slightly temperature-sensitive goods - Protected parking and storage space - Assembly and order picking for all kinds of goods - Maintenance and servicing Roofing by means of Thermoplane is the best solution if no elaborate insulation measures are desired, but condensation and condensation water in the hall are to be avoided. It consists of two shells which are filled with air and thus provide additional insulation. Wall cladding made of sandwich elements is the best way to gain the maximum insulation.

Corner and plugin profiles and seat support covers TC products aren’t always apparent at first glance. They often resolve problems in complex assemblies. For instance, they are used to meet the need for a component that has good thermal insulation properties, but is also lightweight and has a high mechanical load capacity. Providing solutions with composite materials Lightweight yet high rigidity and strength Good thermal insulation Freedom in design for customised shapes Highquality, paintable surfaces Undercuts can be created in the profile Universal for radio waves

We supply molded seals and special elastomer components made of special compounds based on ACM / AEM, NBR / HNBR and FKM / FPM for various hydraulic applications in mechanical engineering.

Traditionally, our rubber-to-metal seals are used in the engine and transmission sectors, often with the elastomer FKM / FPM.

OKS 1105 prevents the formation of electrically conductive layers and minimises the risk of flashovers and dielectric losses. The insulators and switchgear covered with the paste thus maintain a good insulation resistance. Sealing lubrication for electrical or electronic equipment such as relays, plug-in connections, cable lugs and lamp sockets Protection of insulators and switchgear in humid atmospheres, for example of junction boxes, screw terminals, overload cutouts at high-voltage pylons, connecting cables and terminal connections Lubricant for plastic screw connections and other moving parts of metal, ceramic, plastic Advantages and benefits Excellent water repellent properties Excellent surface wetting Good adhesion on glass, porcelain and plastics Stable consistency across a wide temperature range Very good resistance to chemical and weather-based influences (e.g. ozone, UV radiation) Neutral with regard to many materials

Our focus lies on heat-sealable adhesion promoters for thermoplastics, thermosets and vulcanization adhesion promoters for elastomers. However we also provide functional coatings with special properties such as electrical conductivity, abrasion resistance, sliding properties, temperature resistance and much more.

Increases engine performance the exhaust heat remains in the manifold, which improves combustion chamber ventilation and thus performance. Reduces the heat in the engine compartment by up to 70%, resulting in cooler intake air.

Installation directly in Styrofoam Installation can be done after plastering as well Including protection for the thread during plastering Suitable for: Galvanised and zinc brackets Copper brackets More Information about WUS Insulation Plug HERE We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

TEXTALU® E is a thin wall glass fibre braid made of glass fibres with heat-reflecting aluminium coating. Its reflecting surface guarantees that the protective sleeve made of this high-performance material maintains a nearly constant interior temperature even under strongly fluctuating ambient temperatures. This non-ductile braid sleeve is ideal for protecting lines, cables and cable sets against radiation heat.

Bentley-Harris® Textalu 1202 is an insulative fiberglass sleeving with a heavy aluminum coating designed to protect components in high temperature areas. It provides superior insulation to components that must maintain stable temperatures to assure performance efficiency. Textalu 1202 is used on wire harnesses, sensor control wiring and cable assemblies in close proximity to engines and exhaust systems. Due to its elastic structure, Textalu 1202 conforms well to the variable profiles of the components it protects. Its braided construction allows good flexibility in temperatures as low as -50°C. The infra-red emissivity rating of Textalu 1202 heavy aluminum coating, combined with its fiberglass braid, ensures temperature stability inside the Textalu sleeving despite frequent external temperature fluctuations due to radiant heat.

Optigrun Protection and Storage Fleece RMS 500 K protects the roof membrane with simultaneous function of separation, water storage, excellent suction and defined filter function. Installation under the green roof structure directly on the waterproofing Protective layer on roof waterproofing with particularly good suction and capillary action Especially to avoid ponding on uneven roofs Puncture resistance 2,600 N (EN ISO 12236)

NR SILENCERAccessories for insulation drying units Admittedly, modern side channel compressors are soundproofed at the best possible rate, however still cause function-related turbine-like noises, often perceived as disruptive by residents. Hence, the use of silent drying units is of little avail. Trotec NR silencers spare your customers unnecessary noise and this way your service will remain in good memory! Marked reductions in noise could be detected during comprehensive practical tests in applications with compressors of leading manufacturers! The universally applicable NR 19 MultiQube is especially suited for use with Trotec insulation drying units of the MultiQube series and provides still more noise reduction without dynamic pressure – With the NR 19 MultiQube, reductions of 14 to 19 dB are possible!

The HISDpro - Side Drum Heater is a simple yet effective silicone insulated drum heater for the heating of barrels up to 90°C. The Silicone heating jacket is available in four standard sizes (25 / 50 / 105 / 200 liters) and can be manufactured to customer specifications as well. HISDpro heater jackets are particularly suited to melt soaps, fats, varnishes and oil-based products, or respectively reduce their viscosity. The 200-liter element can be combined with the HBD - base drum heater to reduce the heat-up time. These heater jackets are not only used on drums but also containers and any kind of glass-fibre reinforced plastics. They can be produced with any number of belts, e.g. to enable them to be clamped on to rotor blades.

The HSHP – Drum Heater (220 °C) is suitable for steel drums (and with restrictions also for plastic drums). The outer material is a Teflon which is released for contact with food. The material possesses high levels of chemical and acid resistance. However, products such as waxes, soaps and materials with high water content can be heated excellently as well. The drum heating jacket is lightweight, robust and free of silicone. The excellent thermal transfer properties due to the perfect fit result in homogenous temperatures. Our silicone-free high-temperature drum heater is available in the standard size of 200 liters but can also be made to customer specification.

The HTSD-High Temperature Drum Heater is our high temperature drum heater (220 °C) and exclusively suitable for steel drums. The heating jacket is used in areas where large surfaces need heating over 90 °C. This barrel heater is available in four standard sizes (25 / 50 / 105 / 200 liters) and can be manufactured to customer specifications as well. HISD heater jackets are particularly suited to melt soaps, fats, varnishes and oil-based products, or respectively reduce their viscosity. The 200-liter element can be combined with the HBD - base drum heater to reduce the heat-up time. The heating element of the HTSD heating jackets is sewn into a fleece made of silicone-insulated fibreglass material. The insulating outer housing consists of a binder-free mat made of textile glass. The heating element is therefore double insulated (protection class II). An optimal contact with the barrel, as well as a quick assembly and dismantling are achieved by the use of quick release buckles.

The IBC/Bpro-Container Jacket Heater is an insulated heater jacket for the heating of bottle-in-a-cage containers. All four sides of the container are covered by the heater. The container heater has two separate heating circuits (top and bottom), allowing for an economical heating of half-filled containers, too. The HILC unheated insulated lid can be used in addition to shorten the heat-up time. The IBC/B heating jacket can also be combined with the IBC/A container base heater. It's a silicone heater mat that is placed below the plastic container before that is filled.

Optigrun root protection membranes are used on non-root-resistant roof waterproofing under extensive and intensive roof greenings.

Optigrun Structured Storage Fleece SSV 800 is used as a protection fleece for pitched roofs with a combined functionality of water storage and drainage.

FLL-certified roof protection layer made of soft PVC for installation on non root-proof roofs, for forming a watertight and root-proof basin on green roofs with water accumulation and as water-proof and root-proof lining in planters.