Results for
BS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
The housing of the 2008Q floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 8 installation devices. The sockets have a VDE mark. With internal tube for using the tank with the lid closed. Further equipment variants on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Aluminum leveling ring 12251 for floor socket 7702A and 7704A for use in wooden floors or raised access floors. The leveling ring is attached to the floor socket with screws and screwed onto the floor from below. The delivery takes place with grub screws, but without illustrated fastening screws and illustrated floor socket.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Wall socket 5501A with one slot, splash-proof, with protection class IP44. The hinged lid can be locked with a key and is therefore primarily protected against unauthorized use. The storage box is made of sendzimir galvanized steel sheet. The frame and the lid are made of solid aluminum and anodized in natural aluminum. Further colors and equipment variants on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Höhenverstellbarer Hohlbodentank 8904H, 3-fach bestückt. Die Aufnahmebox besteht aus sendzimirverzinktem Stahlblech. Rahmen und Deckel aus Edelstahl. Deckel schließt auch bei gesteckten Standardsteckern in gerader oder abgewinkelter Form. Der herausnehmbare Klappdeckel kann mit 15 mm Stein, Holz etc. belegt werden. Durch den Unterbaurahmen ist diese Bodensteckdose ideal für Hohlböden! Weitere Bestückungsvarianten auf Anfrage.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Energy column/energy bollard EST24 for outdoor use on a foundation created on site. The case is made of brushed stainless steel. The sockets are integrated in a plastic housing, protected with FI/LS and fully wired. The energy column can be locked with a profile half cylinder. The degree of protection of the electrical units is IP44. Optional interior lighting selectable. Other equipment variants on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Power bollard ESP24 for outdoors, protection class: housing IP10, electr. Units IP44. The housing is made of 2 mm glass bead blasted stainless steel. The sockets are integrated in a plastic housing, protected with FI/LS and completely wired. The power bollard can be closed with a profile half cylinder. Thanks to the cable outlet, the door of the power bollard can also be locked when it is in use. Coatings in RAL colors are also possible on request! The equipment is variable.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Socket Pillar/Power Bollard ESP14 for outdoors, protection class IP 44. The housing consists of 2 mm glass bead blasted stainless steel. The sockets are integrated in a plastic housing, protected with FI/LS and completely wired. The power bollard can be closed with a profile half cylinder, even with plugged-in connections. Coatings in RAL colors are also possible on request! The equipment is variable.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Socket Pillar ES850 with 4 slots and a convenient usable height of 50 cm. The housing consists of 4.5 mm thick aluminum profile, powder-coated on the outside. Standard color is RAL 9006 whitealuminum, further coatings in RAL colors are possible. The socket outlets have a VDE mark. Other equipment options on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Energy column/power bollard ES401 on a foundation created on site for indoor and outdoor use. The housing is made of stainless steel, the sockets are secured with 2-pole FI/LS and wired ready for connection. The degree of protection is IP44 (electrical units). Other equipment variants on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Energiesäule/Energiepoller ES325 für den Außenbereich auf vor Ort erstelltem Fundament. Das Gehäuse ist aus Edelstahl V2A gefertigt und glasperlengestrahlt. Die Geräteplatte besteht ebenfalls aus Edelstahl und ist unverdrahtet. Schutzart IP44 (elektrische Einheiten). Weitere Bestückungsvarianten auf Anfrage.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Socket pillar or power bollard ES323 for outdoor use on a foundation created on site. The housing and base are made of solid, glass bead blasted stainless steel. The device plate is also made of stainless steel and is unwired. Degree of protection IP44 (electrical units). Other equipment variants on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
ES321 socket pillar/power bollard for outdoor use on an on-site foundation. The housing and base are made of solid, glass bead blasted stainless steel. The device plate is also made of stainless steel and is unwired. Degree of protection IP44 (electrical units). Other equipment variants on request
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Socket pillar ES301 for 2 units. Due to the IP 44 protection class, the power column is splash-proof. The case is made of solid stainless steel. The material is glass bead blasted. The socket outlets have a VDE mark. The installation unit is suitable for outdoor use! Further equipment variants on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Wall distributor 5723E with 5 slots, splash-proof. Protection class IP 44 (electrical units). The housing is made of sendzimir galvanized sheet steel. The frame and the door are made of stainless steel and the device carrier is made of aluminum. The door closes even when standard plugs are inserted and can be locked with a profile half-cylinder lock. The flush-mounted wall distributor 5723E is suitable for indoor and outdoor use. The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Wall distributor 5722E with 4 slots, splash-proof. Protection class IP 44 (electrical units). The housing is made of Sendzimir galvanized sheet steel. The frame and the door are made of stainless steel and the device carrier is made of aluminum. The door closes even when standard plugs are inserted and can be locked with a profile half-cylinder lock. The 5722E flush-mounted wall distributor is suitable for indoor and outdoor use. The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Wall distributor 5623E with 5 slots and FI/LS protection. The housing is made of stainless steel. The door can be locked with a profile half-cylinder lock, even with plugged-in standard plugs. The surface-mounted wall distributor 5623E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Wall distributor 5622E with 4 slots and FI/LS protection. The housing is made of stainless steel. The door can be locked with a profile half cylinder lock, even with standard plugs inserted. The surface-mounted wall distributor 5622E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Wall distributor 5606E with 6 slots. The housing of the wall distributor is made entirely of stainless steel. The door can be locked with a profile half cylinder lock and can also be closed with standard plugs inserted. The 5606E on-wall distributor is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Wall socket 5602E with 2 slots, for standard plugs in straight or angled form. The complete housing is made of V2A stainless steel and the device carrier made of aluminum. The door can be closed with a locking bolt cylinder and also closes when plugged in. The 5602E on-wall socket is ideal for workshops, cellars and washrooms. Further equipment on request!
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Wall distributor with 2 slots, splash-proof. Degree of protection IP44 (electrical units). The housing is made of sendzimir galvanized steel sheet. The frame and the lid are made of solid aluminum and anodized in natural aluminum. The cover also closes in straight or angled form when standard plugs are inserted. Ideal for sports halls: tested, unrestricted ball throwing safety in accordance with DIN 18032-3: 1997-04. Further equipment variants and colors on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
CEE wall socket 5510E with one slot, waterproof. Degree of protection IP 67. The housing is made of stainless steel V4A, for mounting on the wall. The CEE on-wall socket 5510E can be used both outdoors and indoors. Excellent for use in the catering sector and in a saline environment. Further configuration variants on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Wall distributor 5503A with 3 slots, splash-proof, protection class IP44. The storage box is made of sendzimir galvanized steel sheet. The frame and the lid are made of solid aluminum and anodized in natural aluminum. The lid is secured with a lock and closes in a straight or angled shape even when standard plugs are inserted. Ideal for sports halls: tested, unrestricted ball throwing safety in accordance with DIN 18032-3: 1997-04. Further equipment variants and colors on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
CEE floor tank 8314A made of solid aluminum with lockable hinged lid. Easy opening and closing of the lid thanks to a snap lock integrated in the lid. When closed, the floor tank is splash-proof and therefore also suitable for wet sweepers. The frame and lid surface are anodized in natural aluminum. Further colors and configuration variants on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
CEE floor tank 8310A made of solid aluminum with lockable hinged lid. Easy opening and closing of the lid thanks to a snap lock integrated in the lid. When closed, the floor tank is splash-proof and therefore also suitable for wet sweepers. The frame and lid surface are anodized in natural aluminum. Further colors and equipment variants on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Round CEE floor tank 7012A63 with lockable lid made of saltwater-resistant aluminum. Due to its massive construction, the CEE floor tank can be driven over by a car. When closed, the floor tank is waterproof. Protection class IP 67. Standard surface in natural anodized aluminum. Further configuration and colors variants on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Round CEE floor tank 7012A with lockable lid made of saltwater-resistant aluminum. Due to the massive construction, the CEE floor tank is accessible by car. When closed, it is waterproof. Protection class IP 67. Standard surface in natural anodized aluminum. Further configuration variants and colors on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
The CEE floor tank 6620A consists of a housing made of stainless steel 1.4301 (3 mm) and a 20 mm thick cover made of anodized aluminum that can be closed with a tool. When closed, the CEE floor tank is not waterproof. In the outdoor area, a drainage pipe must be provided on site for the housing to be drained. Due to the surface load of 6.5t, this version can be driven on with a truck if it is properly installed and the lid is completely closed. The lid opens with the help of a gas pressure spring and can be closed with plugged-in plugs. Other equipment variants on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
The CEE floor box 6610A consists of a housing in stainless steel 1.4301 (3 mm) and a lockable, 20 mm thick lid made of anodized aluminum. When closed, the CEE floor box is not waterproof. In the outdoor area, a drain pipe must be provided on-site to drain the housing. Due to the surface load of 6.5t, this version can be driven on with a truck if it is properly installed and the lid is completely closed. The lid opens with the help of a gas pressure spring and can be closed with plugged-in connectors. Further configuration variants on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
CEE floor tank 6523Q with a stainless steel housing. The lid closes watertight, protection class IP 65, and has an internal tube for using the tank when the lid is closed. Degree of protection with tube: IP21. Further configuration variants on request.
Request for a quoteResults for
Import - Import exportNumber of results
161 ProductsCountries
Company type