Hydraulic equipment - Import export

Internal and external skiving - efficient and clean! The USM 150 is a stable machine for skiving up to 5" hoses. The double-skiving tool with reinforced mandrels can be controlled separately or simultaneously without changing the tool.

USM 10 The skiving machine for the workshop. For skiving hoses up to 2” on the inside and the outside. 0.37 kW drive. USM 10 ecoline variant in 1-phase design, all others in 3-phase design. USM 10 S The new skiving machine: The lowest change-over times due to preset tool. Higher productivity due to low change-over times and user friendly operation for optimum results.

This equipment now permits fittings up to 3“ to be inserted or extracted. Due to its innovative rapid tool sled, the insertion of 90 degree, 45 degree or straight fittings without changing tools is now simple and quick. Ergonomic Freely positional foot pedal for clamping hose saves time and increases productivity Lifting eyes for easy positioning of the machine Simple to use Universal hose clamping jaws for all hose diameters without the need for changeover eliminates lengthy setup times Axially adjustable clamping unit for all diameters prevents kinking of thin hoses and for efficient operation Individual clamping force adjustment for damage-free clamping avoiding scrap Zero maintenance and wear contributes to cost savings Rapid sled for inserting curved and straight fittings without time-consuming exchange of fork sets saves time Safety compliant Moving components have safety guarding CE-compliant, robust UNIFLEX quality

Internal and external skiving—efficient and clean! The USM 100 prepares hoses for assembly, and both internal and external skiving can be done simultaneously. Its motor for drving the knife is easily controlled using a foot pedal which allows the operator to use both hands for guiding the hose through the process.

A high-performance nipple inserter for inserting fittings that are difficult to assemble

The small, light-weight cutting machine for workshops. 1-phase drive, 1.2 kW. For hydraulic hoses up to 1”. Quality steel blade •Long lasting German quality steel blades, lowering the cost of ownership Compact design •Ideal for a mobile service CE compliant •Brake motor for safety •Security shield

- Metric thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread- VS seal rings - Seals in connectors NBR - Material brass nickel-plated - Temperature range -4 to 158 °F (-20 to +70 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)

- Whitworth pipe thread- Chambered O-ring - Seals NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, not designed for steady motion of the tube - Not designed for steady motion of the tube

- R-thread - Whitworth pipe thread conical - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)

- Whitworth pipe thread - Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range 0 to 232 psi (0 to 16 bar)

- Whitworth pipe thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread - Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)

— Metric thread with hexagon socket — Chambered O-ring — Sealing NBR — Material brass nickel-plated — Temperature range -4 to 176 °F (-20 to +80 °C) — Working pressure range -14 to 232 psi (-0.95 to 16 bar)

- Whitworth pipe thread with hexagon socket - Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- with shut-off valve - M5 thread - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range 0 to 232 psi (0 to 16 bar)

- Metric thread - Chambered O-ring - Seals FPM - Material stainless steel 1.4301/1.4307 - Temperature range -20 to +120 °C - Working pressure range -0.95 to 16 bar - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread - Chambered O-ring - Seals FPM - Material stainless steel AISI 304/ 304L (1.4301/1.4307) - Temperature range -4 to 248 °F (-20 to +120 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - swiveling, but not designed for steady motion of the tube

- Metric thread- With hexagon socket - Chambered O-ring - Seals FKM - Material 1.4301 / 1.4307 - Temperature range: -20 to +120 °C - Pressure range: -0,95 to 16 bar - Media: Air, vacuum and liquids

- Thread metric - Chambered O-ring - Seals FPM - Material stainless steel AISI 304/ 304L (1.4301/1.4307) - Temperature range -4 to 248 °F (-20 to +120 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)

- Short design (throttle)- Adjusting screw with knurl - Fine adjustment with a noticeable click - Whitworth pipe thread - Seal in connection FPM - Material: brass nickel-plated - Type: Cone-type throttle - Allowable medium: Air, Oil - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0,95 to 16 bar)

- Whitworth pipe thread DIN ISO 228 - Chambered O-ring - Seals FPM - Material with media contact: Brass, dezincification resistant - Material without media contact: Brass - Temperature range: -4 to 248 °F (-20 to +120 °C) - Working pressure range: -14 to 348 psi (-0.95 to 24 bar)

Handling general scrap, car bodies, steel chips, shredder scrap, paving stones and much more, in sea and inland ports or at storage facilities. For pier engineering and riverbed maintenance. For various types of cranes and excavators with internal or external holding cables. For various types of crane with control systems designed for hydraulic motor grab systems. Technical design Open, half-closed or closed grip design Suitable for handling scrap, stones, waste and other difficult to grab goods depending on design Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads, self-locking grab suspension for crane hooks Grab drive: Vertical electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Grab connection bearing:

Waste incineration plants, refuse-derived fuel (RDF) incineration plants or incineration plants of any kind. For various types of cranes which operate using hooks or rope/chain suspension. Technical design Open shell design Suitable for handling all kinds of waste Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads Self-locking grab suspension for crane hooks Grab drive: Vertical electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Closing and opening movements controlled by directly connected hydraulic cylinders, with stable piston rod protection Grab connection bearing: Re-greaseable, robust steel bushing bearing KRÖGER MAINTENANCE-FREE bearing system Stable shell structure with shells made out of S355J2+N

Bulk handling of any kind in sea and inland ports or storage facilities. For ship-to-ship, ship-to-storage/wagon/silo handling. For various types of handling machinery (mobile, stationary, crawler or portal) designed to be connected to hydraulic attachments. Technical design Half-closed or closed grip; with 2 or 4 cylinders Optimisation of machine load capacity thanks to its lightweight design which can hold maximum loads Grab drive: Hydraulic hoses connect the materials handling machine to the grab Closing and opening movements are controlled by the materials handling machine Closing and opening movements controlled by directly connected hydraulic cylinders Grab connection bearing Re-greaseable, robust steel bushing bearing Stable, torsion-resistant shells adapted to material flow: Shell plates made of S355J2+N Cutting edges made of special, highly wear-resistant steel

Overview of the main rope grab features for which we offer spare parts: Grab shells All bearings Pulleys Guide rollers Suspension

We build entire plants and components for your recycling process line: separating – washing – conveying – processing METZEN provides you with machinery and complete plants for plastics recycling, e.g., for agricultural films, PET bottles, mixed municipal waste and much more. We build components for every stage of your process line: separating – washing – conveying – processing

Korzonek Klarwerkstechnik, METZEN’s sewage treatment branch, has been a competent and trusted sewage engineering partner to local authorities, wastewater companies and industrials for over 30 years. We design and manufacture custom spare parts for all scrapers and refurbish them to guarantee their long service life. Longitudinal scraper chassis Circular scraper chassis Drive wheel with direct drive for circular scrapers Rack-and-pinion drive chassis Rack-and-pinion rails Longitudinal scraper chassis with stabilising cross beam and rail drive Rack-and-pinion drive with rail impeller Bolt rail for rack-and-pinion drive Rail longitudinal scraper chassis with synchronously controlled drive Pivot bearings and slip ring systems We manufacture and assemble pivot bearings and slip ring systems with hose swivel joints or without hose access. Scraping blades for longitudinal and circular scrapers We manufacture and assemble single and multi-piece scraping blades.