Results for
ATLAS MATERIAL TESTING TECHNOLOGY GMBH
Germany
The Ci3000+ Weather-Ometer and Fade-Ometer with their advanced digital control systems, represent monumental achievements in applying digital and optical technologies in easy-to-use laboratory weathering instruments. The 3000 Series is approved by many OEMs in the textiles, paints & coatings and plastics industries as the exclusive platform to deliver accurate, reproducible and repeatable results for predicting service life. The 3000 Series has been certified CE, UL, CSA, ISO and EN compliant. Key features of this instrument include: a rotating sample rack to maximize uniformity over all specimens; custom designed nozzles to provide uniform specimen and rack spray; ASTM Black Panel Thermometer or ISO/DIN Black Standard Thermometer to control and monitor temperature at specimen level to ensure test repeatability. 4500 W water-cooled xenon arc lamp Total exposure area of 2,188 cm 2 (339 in 2) TFT full color 12" touch screen control panel display of all test parameters Direct setting and control of Black Panel Temperature; uninsulated (BPT) or insulated (BST) Direct setting and control of relative humidity Direct setting and control of specimen chamber air temperature Display of diagnostic messages 14 factory pre-programmed test methods (Weather-Ometer); 6 factory pre-programmed test methods (Fade-Ometer) Space for 12 custom programs; sub-cycle capability Multi-language capability (English, French, German, Spanish, Japanese, Chinese, Korean, Turkish) Streaming data output via ethernet or USB port. USB thumb drive included SmartDamper TM to reduce test variability in chamber temperature and humidity and compensates for changes in ambient lab conditions SmartLight Monitor TM verifies that correct light capsule is installed Filter combinations available to meet all common test methods Air intake dust filter CS-7 xenon lamp cooling system Chamber viewing window in door Universal electrical configurations to meet local frequency, voltage, and electrical requirements Meets CE, UL, ISO EN and CSA safety requirements Automatic test countdown based on time or radiant exposure VibraSonic TM Humidification System Specimen Holders available to accommodate many sample types Calibrated xenon reference lamp Water purity indicator Dual Black Panel Temperature (BPT) and Black Standard Temperature (BST) Measurement/Control including uninsulated BPT and BST sensors Monitoring of second wavelength: 300-400 nm, 340 nm or 420 nm including beam splitter, dual filter housing and lamp calibration Special locking casters and frame modification WXView (Weather View) Data Acquisition System 2-tier rack - 60 specimen positions
ATLAS MATERIAL TESTING TECHNOLOGY GMBH
Germany
The Atlas SUNTEST XXL+ is a large state-of-the-art xenon flatbed instrument. The 3000 cm2 test chamber is perfect for high volume weathering testing of large flat or 3-D specimen. SUNTEST XXL+ offers a complete set of features ideal for standard testing covering all common industry weathering standards. 3x 1700 W air-cooled Xenon Lamps 3000 cm 2 exposure area Touch screen with colour display to monitor and display test parameters Measurement and control of Irradiance 300-400 nm / 340nm or 420nm Measurement and control of Black Standard (BST); (Black Panel optional) Measurement and control of Chamber Temperature Display of Diagnostic Messages Storage for 10 user-defined test methods Pre-programmed international standard test method Multilingual User Interface Control Panel tiltable for increased operating comfort Ultrasonic humidification system for humidity control Specimen spray system with integrated 60 l water reservoir Static, horizontal exposure area for flat or 3D specimen Test chamber with 5 ° slope for optimum spray water drain Access port ca. 3,0 x 2,5 cm for potential use of additional external sensors inside the test chamber Light cassette including non-ageing aluminium reflector, coated quartz filter and slot for additional optical filters Switch-off by radiant exposure, light exposure time or total operating time Advanced Auto Start functions Data output via Memory Card or RS 232 Ethernet interface plus XenoTouch Add-ons 1, 2, and 3 (“Remote Control“, “E-Mail Service“, “Online Monitoring“) Various specimen holders to hold different panel sizes. XenoCal sensors to calibrate BST and irradiance. Large variety of filter systems: coated and uncoated quartz, special UV glass, daylight filter, window glass, Solar ID 65, Solar Standard, to meet various spectral specifications in standards.
ATLAS MATERIAL TESTING TECHNOLOGY GMBH
Germany
Xenotest Alpha+ is a compact stand-alone rotating rack xenon instrument with 1320cm 2 exposure area. It comes serially with a complete set of parameter controls. Irradiance and temperature are measured and controlled directly on the sample level using on-rack XENOSENSIV sensor technology. Alpha+ complies with the vast majority of industry standards setting the benchmark in narrow tolerance testing. Due to its highly reliable performance, it’s often chosen by R&D departments or commercial Service Test Houses. 1x 2200 W air-cooled Xenon Lamp 1320 cm 2 exposure area High-irradiance testing up to 180 W/m 2 (3 Sun) Touch screen with colour display to monitor and display test parameters Direct Setting and Control of Irradiance (300-400nm) Direct Setting and Control of Black Standard Temperature Direct Setting and Control of Chamber Temperature Direct Setting and Control of Relative Humidity Display of Diagnostic Messages Storage for 10 user-defined test methods Pre-programmed international standard test methods Multilingual User Interface Non-aging XENOCHROME filters to simulate outdoor daylight, daylight behind window glass On-rack XENOSENSIV 300-400 nm for measuring and controlling irradiance (in W/m²) and BST (C°) on sample level Selectable Temperature control either by Chamber Temperature (max. 70 °C), or by Dual Control: Chamber Temperature and Black Standard Temperature (up to 130 °C) Fan-controlled temperature difference between Chamber and Black Standard Temperature Ultrasonic humidification system for humidity control Specimen spray system with integrated 60 l water reservoir Specimen holder carousel for 11 specimen holders Switch-off by radiant exposure, light exposure time or total operating time Advanced Auto Start functions Data output via Memory Card or RS 232 Ethernet interface plus XenoTouch Add-ons 1, 2, and 3 (“Remote Control“, “E-Mail Service“, “Online Monitoring“) Thermoprinter XenoCal BST Black Standard Thermometer XenoCal WST White Standard Thermometer XenoCal BB 300-400 Irradiance Sensor XenoCal WB 300-800 Irradiance Sensor XenoCal NB 340 Irradiance Sensor Turning mode programmable
ATLAS MATERIAL TESTING TECHNOLOGY GMBH
Germany
The Atlas SUNTEST XXL+ FD is a large state-of-the-art xenon flatbed instrument. It’s completely target designed to meet the testing needs of the FMCG industry, such as drinks, foodstuffs, personal care or household products. XXL+ FD enables consumer goods manufacturers to test their products realistically within very short test times, typically with acceleration factors between 10-30 versus real time. It’s for reliable qualification of stable product formulations, determination of appropriate packaging materials, and supporting product shelflife claims. 3x 1700 W air-cooled Xenon Lamps 3000 cm 2 exposure area Touch screen with colour display to monitor and display test parameters Measurement and Control of Irradiance 300-400 nm / 340nm or 420nm Measurement and Control of Black Standard (BST); (Black Panel optional) Measurement and Control of Chamber Temperature Display of Diagnostic Messages Storage for 10 user-defined test methods Pre-programmed international standard test method Multilingual User Interface Control Panel tiltable for increased operating comfort Thermal insulation of test chamber and periphery preventing water condensation Temperature control selectable either via CHT (15° * - 70 °C; *with chiller) or via CHT and BST (25° * - 100 °C; *with chiller) simultaneously (dual control) Adapted chiller SunCool XXL+ for testing at low temperatures in the range 15-30°C CHT; detachable for standard weathering testing needs Ultrasonic humidification system for controlled humidity during operation without SunCool Specimen spray system with integrated 60 l water reservoir for spray cycles at 25°C ** - 70°C Static, horizontal exposure area for flat or 3D specimen Test chamber with 5 ° slope for optimum spray water drain Access port ca. 3,0 x 2,5 cm for potential use of additional external sensors inside the test chamber Light cassette including non-ageing aluminium reflector, coated quartz filter and slot for additional optical filters Switch-off by radiant exposure, light exposure time or total operating time Advanced Auto Start functions Data output via Memory Card or RS 232 Ethernet interface plus XenoTouch Add-ons 1, 2, and 3 (“Remote Control“, “E-Mail Service“, “Online Monitoring“) Sliding sample table for easy specimen loading; exposure area (WxD) 74 x 37 cm
ATLAS MATERIAL TESTING TECHNOLOGY GMBH
Germany
The 220 is a large capacity lightfastness tester dedicated for textile testing. It comes with premium on-rack light and temperature sensor and non-aging optical filter technology. With the ability to test 38 samples, the 220 provides nearly twice as much capacity in the same footprint compared to 150S+. The combination of its large test chamber and the efficient use of power and water make it today’s most economic air-cooled instrument available. It complies to standards ISO 105 B02, AATCC TM16 (option 3), and Marks & Spencer C9, C9A. 1x 2200 W air-cooled Xenon Lamp 2310 cm 2 exposure area Touch screen with colour display to monitor and display test parameters Direct Setting and Control of Irradiance (300-400 nm) Direct Setting and Control of Black Standard Temperature Direct Setting and Control of Chamber Temperature Direct Setting and Control of Relative Humidity Display of Diagnostic Message Storage for 10 user-defined tests Multilingual User Interface Non-aging filter systems for ISO 105-B02 and AATCC TM16 On-rack XENOSENSIV® for measuring and controlling irradiance (in W/m²) and Black Standard Temperature on sample level Selectable temperature control either by Chamber Temperature (up to 65 °C) or by Dual Control: Chamber Temperature and Black Standard Temperature (up to 100 °C) simultaneously Fan-controlled temperature difference between Chamber and Black Standard Temperature Ultrasonic humidification system with integrated 60l water reservoir for humidity control (automatic refill) Sample rack suiting 19 sample holders with capacity for 38 standard textile samples Pre-programmed standards ISO 105 B02 and AATCC TM16-2004 (Option 3) Switch-off by radiant exposure, light exposure or total operating time UV-protected test chamber window Advanced Auto Start functions Internal memory chip for storing instrument data Data output via Memory Card or RS 232 Ethernet interface plus XenoTouch Add-ons 1, 2, and 3 (“Remote Control“, “E-Mail Service“, “Online Monitoring“) XenoCal BB 300-400 XenoCal BB 300-400 BST XenoCal BST
Do you sell or make similar products?
Sign up to europages and have your products listed
ATLAS MATERIAL TESTING TECHNOLOGY GMBH
Germany
The Ci4000 Weather-Ometer, with its advanced digital control system, represents monumental achievement in applying digital and optical technologies in an easy to use laboratory weathering instrument. The Ci4000 is approved by many OEMs in the automotive, paints and coatings, and plastics industries as the exclusive platform to deliver accurate, reproducible and repeatable results for predicting service life. The Ci4000 has been certified CE, UL, CSA, ISO and EN compliant. 6500 W water cooled xenon arc lamp system Total exposure area of 6,500 cm 2 (1,008 in 2) 3-tier inclined specimen rack TFT full color 12" touch screen control panel display of all test parameters Direct setting and control of irradiance: 340nm, 420nm, 300-400nm or Lux Direct setting and control of Black Panel Temperature; uninsulated (BPT) or insulated (BST) Direct setting and control of relative humidity Direct setting and control of specimen chamber air temperature Display of diagnostics messages 14 factory pre-programmed test methods Space for 12 custom programs; sub-cycle capability Multi-language capability (English, French, German, Spanish, Japanese, Chinese, Korean, Turkish) Streaming data output via ethernet or USB port. USB thumb drive included SmartDamper TM to reduce test variability in chamber temperature and humidity and compensates for changes in ambient lab conditions SmartLight Monitor TM verifies that correct light capsule is installed Specimen and rack spray Filter combinations available to meet all common test methods Air intake dust filter CS-7 xenon lamp cooling system Water purity indicator with alarm Calibrated xenon reference lamp Chamber viewing window in door Universal electrical configurations to meet local frequency, voltage, and electrical requirements Meets CE, UL, ISO EN and CSA safety requirements Automatic test countdown based on time or radiant exposure Specimen Holders available to accommodate many sample types VibraSonic TM Humidification System Dual Black Panel Temperature (BPT) and Black Standard Temperature (BST) Measurement/Control including uninsulated BPT and BST sensors Monitoring of second wavelength: 300-400 nm, 340 nm, 420 nm or Lux Refrigeration coils installed in air duct (does not include required refrigeration unit) S 3T Specific Specimen Surface Temperature system WXView (Weather View) Data Acquisition System LiquiAir TM self contained xenon lamp cooling system (top or wall mount available) Chamber air and DI water refrigeration
ATLAS MATERIAL TESTING TECHNOLOGY GMBH
Germany
The Ci5000 is approved by many OEMs in the automotive, paints & coatings and plastics industries as the exclusive platform to deliver accurate, reproducible and repeatable results for predicting service life. The Ci5000 has been certified CE, UL, CSA, ISO and EN compliant. Unmatched Repeatability and Reproducibility Design and engineering innovations in the airflow, irradiance and control systems have dramatically reduced variability in critical test parameters. As a result, the Ci5000 achieves new levels of temperature, humidity and light exposure uniformity. Now available in a low voltage model (240V) and standard voltage model (480V) depending on incoming power configurations at the customer's location. 12000 W water cooled xenon arc lamp system Total exposure area: 11,000 cm 2 (1,705 in 2) 3-tier inclined specimen rack TFT full color 12" touch screen control panel display of all test parameters Direct Setting and control of Irradiance: 340nm, 420nm, 300-400nm or Lux Direct setting and control of Black Panel Temperature; uninsulated (BPT) or insulated (BST) Direct Setting and control of relative humidity Direct setting and control of specimen chamber air temperature Display of diagnostic messages 14 factory pre-programmed test methods Space for 12 custom programs; sub-cycle capability Multi-Language capability (English, French, German, Spanish, Japanese, Chinese, Korean, Turkish) Streaming data output via ethernet or USB port. USB thumb drive included Smart Damper TM to reduce rest variability in chamber temperature and humidity and compensate for changes in ambient lab conditions SmartLight Monitor TM verifies that correct light capsule is installed Specimen and rack spray Filter combinations available to meet all common test methods Air intake dust filter CS-7 xenon lamp cooling system Water purity indicator with alarm Calibrated xenon reference lamp Chamber viewing window in door Universal electrical configurations to meet local frequency, voltage and electrical requirements Meets CE, UL, ISO EN and CSA safety requirements Automatic test countdown based on time or radiant exposure Specimen Holders available to accommodate many sample types VibraSonic TM Humidification System Dual Black Panel Temperature (BPT) and Black Standard Temperature (BST) Measurement/Control including uninsulated BPT and BST sensors Monitoring of second wavelength 300-400 nm, 340 nm, 420 nm, or Lux Refrigeration coils installed in air duct (does not include required refrigeration unit) S 3T Specific Specimen Surface Temperature system WXView (Weather View) Data Acquisition System LiquiAir TM self contained xenon lamp cooling system (top or wall mount available) Chamber air and DI water refrigeration XenoCal irradiance calibration device for independent irradiance calibration and measurement at the sample plane High Irradiance capabilities available with custom rack designs (Ci5000 HE)
Results for
Humidification systems - Import exportNumber of results
8 ProductsCountries
Company type
Category