Hole screws - Import export

Delivery program: Plastic Screws From M3 x 20 mm to M10 x 60 mm. Plastic Knurled screws DIN 653 from M3. Plastic Transverse-hole screws DIN 404 from M3 x 20 mm. Plastic Nuts From M3 Plastic Threaded pins DIN 551 from M3 Connection elements Other connection elements such as discs, caps, spacers and diverse articles moulded from all commercially available plastics (granulate). All articles are available with the specifications listed next. Materials: Articles moulded from PA, POM and all other plastics (granulate) commonly available on the market. Standards: According to DIN/EN/ISO or drawings. Colour: According to RAL table or individual customer wishes.

zinc diecasting*for rods up to 16 mm Ø*nickel plated brass screws*location hole 10 mm Ø

zinc diecasting*for rods up to 16 mm Ø*nickel plated brass screws*location hole 10 mm Ø

In the case of cassettes for screwing from below, the existing mounting holes are reworked so that screwing from below is possible. Please note any deviating positions of the holes and screw connection sizes.

Standard dosage approx. 4 ml per stroke. Dosing pumps suitable for barrels, canisters, carboys or bottles, for dosing liquids of different viscosities. Dosing pumps are mounted by you in your existing container closure (see the locating bore table). To do this, a suitable hole is drilled in the cap. Then the pump is inserted through the hole and screwed in place from below. A matching container connection is not included in the scope of delivery.

Mounting plate for Master / Invo Plus / Star Track, 4 hole, 5 mm MPL, without screws, Material: steel nickel plated

Use: Panel insert for thermocouple and RTD circuits. Mounting by means of two screws at front hole with a diameter of 22.5 mm. Ideal panelinsert for instrument cases. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body. • Stainless steel screws and brackets for front mounting.

The MBS hydraulic cylinders of the MZR-1001 series are differential cylinders for applications with high quality requirements in stationary mechanical engineering. All cylinders work with low friction and are characterized by a stick-slip-free run. Lift and piston rod overhang are variable selectable. The cylinder is connected via a head flange mounting with centering shoulder and a threaded shoulder on the piston rod. There are connections with screw-in holes for pipe fittings to BSPP ISO 1179-2 as well as vent holes for a free installation position. With the exception of the piston rod, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of types H, HL and HLP in accordance with DIN 51524 / 51525-1. If you have questions about areas of application or other options, we are happy to answe

Plastic for welding … Welding is often the simplest and best way of fastening. The range of different perforated plates offers a wide range of applications. Size and quantity of the welding joints depend on the substructure and must be defined on site. Please note that the perforated metal sheet can under no circumstances take over any static functions. The secutex buffer pad is simply disconnected by grinding away the welding spots. These are the advantages Simply weld onto the item to be welded No need for repeatable holes in the workpiece No holes in the secutex impact protection material Applications On all metal surfaces On thin metal walls Everywhere where screwing is not possible or screw holes are unwanted Examples Collecting basins Ramp protection metal boxes Container Forklift Gripper Girder protection Pallet truck 1. Perforated metal sheet, overhang at the side This version is suitable for welding onto flat surfaces and extrawide profiles of construction steel.

Features • Ideal for crumbly and porous building materials • All-purpose character: also holds in mixed masonry, as is often the case in old buildings • Spreads in several directions and thus ensures secure anchoring and high holding values • Extra deep seating in masonry • Extending rotors prevent rotation in the drill hole • 100% nylon • Altbaujoker + screw: perfectly matched system Description & Area of Application • Multiple spreading by means of 2-way separated spreading elements offset by 90° • Movable rotors • Flexible wall plug neck • Large anchoring depth • Altbaujoker + Screw: Screw with TX drive

Robust clip frame for quick motif change due to proven folding technique. UV-resistant thanks to low-reflection protective film. • Robuster DIN A3 Aluminium-Klapprahmen, silber eloxiert • Quick and easy motif change due to proven folding technique • Low-reflection, UV-resistant protective cover • Impact-resistant polystyrene back panel • Mitred corners • Concealed wall mounting holes for screwing on or hanging or permanent attachment with self-adhesive strips supplied • Attachment options for use in portrait and landscape format • Incl. mounting material consisting of screws, dowels and four self-adhesive strips

Robust clip frame for quick motif change due to proven folding technique. UV-resistant thanks to low-reflection protective film. • Robust DIN A4 aluminium snap frame, silver anodised • Quick and easy motif change due to proven folding technique • Low-reflection, UV-resistant protective cover • Impact-resistant polystyrene back panel • Mitred corners • Concealed wall mounting holes for screwing on or hanging or permanent attachment with self-adhesive strips supplied • Attachment options for use in portrait and landscape format • Incl. mounting material consisting of screws, dowels and four self-adhesive strips

4-hole Screw-in BSPP Threaded Flange (Flat Style) GP-FL-LK-G ▪ Working Pressure: 180 bar ... 250 bar ▪ Ø LK: 30 mm ... 72,5 mm ▪ Materials: S355J0 or equivalent ▪ Surfaces: CrVI-free 4-hole Butt Weld Flange GP-LK...-ST.../...#K ▪ Working Pressure: 250 bar ▪ Ø LK: 30 mm ... 56 mm ▪ Materials: S355J0 or equivalent ▪ Surfaces: blank, oiled 4-hole Fitting Flange with BSP 60° Cone Connector (acc. to BS 5200) GP-LK...-AG...#K ▪ Working Pressure 250 bar ▪ Ø LK: 30 mm ... 56 mm ▪ Materials: S355J0 or equivalent ▪ Surfaces: CrVI-free 4-hole Screw-in BSPP Threaded Flange GP-LK...-G...#K ▪ Working Pressure: 250 bar ▪ Ø LK: 30 mm ... 56 mm ▪ Materials: S355J0 or equivalent ▪ Surfaces: CrVI-free

3-hole 90° Screw-in BSPP Threaded Flange WP-3-LK-G ▪ Working Pressure: 300 bar ▪ Ø LK: 26 mm ... 56 mm ▪ Materials: S355J0 or equivalent ▪ Surfaces: ZnNi 4-hole 90° Screw-in BSPP Threaded Flange WP-LK-G ▪ Working Pressure: 250 bar ... 300 bar ▪ Ø LK:35 mm ... 55 mm ▪ Materials: S355J0or equivalent ▪ Surfaces: ZnNi 3-hole 90° Screw-in BSPP Threaded Flange(Aluminium) WP-3-LK-G-W50 ▪ Working Pressure: 180 bar ▪ Ø LK: 26 mm ... 51-56 mm ▪ Materials: Aluminium [EN AC-Al Si9Cu(Fe)] 4-hole 90° Screw-in BSPP Threaded Flange (Aluminium) WP-LK-G-W50 ▪ Working Pressure: 180 bar ▪ Ø LK : 30 mm ... 55 mm ▪ Materials: Aluminium [EN AC-Al Si9Cu(Fe)]

Applicable for higher bore hole tolerances. Suitable for blind holes or holes with and without screw threads. Fast assembly, generally no tools required. Please have a look at our series 267, too. Material: PA Colours: last digits 000 = natural last digits 699 = black

Applicable for higher bore hole tolerances. Suitable for blind holes or holes with and without screw threads. Fast assembly, generally no tools required. 2 types - removable (application dependent) and non-removable (application dependent) D = removable +/- (yes/no) Material: PA Colours: last digits 000 = natural last digits 699 = black

Backlash-free Metal Bellows Coupling Absolutely backlash-free • Life time proof and maintenance-free Accurate transmission characteristics • Installation and removal friendly Rear installation space • High misalignment compensation 5085 ECOLOC Rear installation space High misalignment compensation Dimensions L = Total length of coupling D 1 = Outer diameter of hub 1 H = Clearance diameter d 1/d 2 = Bore diameter C 1 = Guided length shaft bore d 1 K = Distance shaft axis - clamping screw axis I = Distance between clamping screw hole and hub end D G1 = Thread Characteristics Metal bellows made of stainless steel, hubs made of aluminum The shaft tolerance should be within the fit tolerance "g6" or "h7" The contact surfaces have to be free from oil and grease Optional designs with keyways DIN 6885-1

Backlash-free Metal Bellows Coupling Compact design • High misalignment compensation • Absolutely backlash-free • Life time proof and maintenance-free • Accurate transmission characteristics • Installation and removal friendly 5078 ECOLOC Compact design High misalignment compensation Dimensions L = Total length of coupling D 1 = Outer diameter of hub 1 H = Clearance diameter d 1/d 2 = Bore diameter C 1 = Guided length shaft bore d 1 K = Distance shaft axis - clamping screw axis I = Distance between clamping screw hole and hub end D G1 = Thread Characteristics Metal bellows made of stainless steel, hubs made of aluminum The shaft tolerance should be within the fit tolerance "g6" or "h7" The contact surfaces have to be free from oil and grease Optional designs with keyways DIN 6885-1

Backlash-free Metal Bellows Coupling Absolutely backlash-free • Life time proof and maintenance-free Accurate transmission characteristics • Installation and removal friendly Short design • High torsional stiffness • Low moment of inertia 5075 ECOLOC Short design High torsional stiffness Low moment of inertia Dimensions L = Total length of coupling D 1 = Outer diameter of hub 1 H = Clearance diameter d 1/d 2 = Bore diameter C 1 = Guided length shaft bore d 1 K = Distance shaft axis - clamping screw axis I = Distance between clamping screw hole and hub end D G1 = Thread Characteristics Metal bellows made of stainless steel, hubs made of aluminum The shaft tolerance should be within the fit tolerance "g6" or "h7" The contact surfaces have to be free from oil and grease Optional designs with keyways DIN 6885-1

Typical belt drum application The bending moment acting on the hub/shaft connection is the main load to evaluate in a belt drum or similar application. Excessive bending moments can cause overstress in the webs between the screw holes in the locking assembly. In the case of additional loads (bending moments/ radial loads) screw tightening torques may have to be reduced. To limit the influence of the bending load on the locking assembly connection we use the following criteria during the belt drum design process: - Shaft deflection from the bending moments can only have a maximum deflection fm < 1/2000 * L (bearing centre distance). - For the permissible bending load values please refer to our tables. If the pressures are too high for the application please note datasheets Mb 20% - Mb 80% with reduced bending moments. One of the most demanding challenges of our promise of performance is the conveyor pulley application field. The extreme loads which such components are subject...

Adjustable feet in over 20,000 variations — fixed adjustable foot — hinged adjustable foot function: — screw-on (with screw-on hole/with extension arm/through accessories: floor mounting for trapeze plate) — levelable — swiveling — anti-slip (by accessories: anti-slip plate made of thermoplastic elastomer) — EDS-capable Plate shape and size: — Round — Trapezoidal shape — Square — Diameter 20 mm to 120 mm other shapes on request Material plate: — Plastic PA, glass ball reinforced — steel, galvanized — zinc die casting — stainless steel other materials and surfaces on request Threaded rods for adjustable feet with/without ball head — swivel range 0° - 20° degrees — M5, M6, M8, M10, M12, M14, M16, M20, M24, M30 — Length: 20 - 300 mm — Alternative: ball head with internal thread — Material: galvanized steel, stainless steel Colors: black, silver, other colors on request

Flexible leveling feet Swiveling, leveling adjustable feet to compensate for uneven floors Swivel range : ± 4 ° to 20°. Adjustable foot plate: different shapes possible from diameter 20 mm to 120 mm Material: plastic PA (also ESD-capable possible) / zinc die-cast / stainless steel Color: black / bright, other colors on request Optionally with anti-slip plate: prevents adjustable feet from slipping on smooth industrial floors and can dampen vibrations Fastening to the floor with different versions: Optionally with screw holes in the plate Plate with extende base Base plate for safe subsequent mounting threaded rod: Material: steel / stainless steel Surface: galvanized / bright Alternative: ball head with internal thread Optionally with lock nut Translated with www.DeepL.com/Translator (free version)

The shape of PF 112 Extreme has been proved in type A segmentation, inside is continually developed: the extensive endurance test in fire container of I.F.R.T (International Fire &amp; Rescue Training) proved, that PF 112 Extreme withstand extreme encumbers. Often used by trainers it has been exposed to high demands. Hereby this helmet could exploit its strengths! MED- approval Helmet type A Made of high performance glass fibre GFK60 good isolation, best protection and low weight without any screw holes from the outside, i.e. no drilling hose in the helmet – 100% stability proven shape with maximal ear freedom comfortable headring leather cushion for easy change 6-point orb-weaving suspension CASCO Disc-Fit™- size adjustments, step less individual fitting to head size (53 – 64 cm), if needed in seconds adjustable Carrier net Loop for hanging up helmet Helmet: EN443:2008 Visor: EN 14458:2004