Results for
IGUS® GMBH
Germany
xiros® A500 heat Plastic ball bearings for high temperatures up to +150°C Product range xiros® A500 chemistry Plastic ball bearings with high resistance against chemicals. Product range xiros® A500 economical alternative Plastic ball bearings as an economical alternative. Product range xiros® A500 wear resistant Plastic ball bearing with wear resistance improved by factor 3. Product range Cage: PEEK PA Balls ES = stainless steel GL = glas PAI = Polymer xiros® A500 heat Plastic ball bearings for high temperatures up to +150°C Product range xiros® A500 chemistry Plastic ball bearings with high resistance against chemicals. Product range xiros® A500 economical alternative Plastic ball bearings as an economical alternative. Product range xiros® A500 wear resistant Plastic ball bearing with wear resistance improved by factor 3. Product range
Request for a quoteFRIEDR. FREEK GMBH
Germany
The HSHP – Drum Heater (220 °C) is suitable for steel drums (and with restrictions also for plastic drums). The outer material is a Teflon which is released for contact with food. The material possesses high levels of chemical and acid resistance. However, products such as waxes, soaps and materials with high water content can be heated excellently as well. The drum heating jacket is lightweight, robust and free of silicone. The excellent thermal transfer properties due to the perfect fit result in homogenous temperatures. Our silicone-free high-temperature drum heater is available in the standard size of 200 liters but can also be made to customer specification.
Request for a quoteHR-STRUCTURES GMBH
Germany
Our thermally insulated halls are the highest quality solution and offer the best protection for sensitive goods. Thanks to all-round high insulation by means of sandwich elements, these lightweight halls can be used in all areas. The areas of application of our thermally insulated halls: - Storage for sensitive goods - protected parking and storage space - Assembly and commissioning for goods of all kinds - Maintenance and repair - Production and workshop - Sales and exhibition areas Benefit from the excellent heat-insulating and low-maintenance properties of full cladding made of sandwich elements. They consist of two outer shells made of steel and a foam core made of polyurethane or mineral wool, thus ensuring optimum insulation. This means that the energy required to heat the industrial hall can be significantly reduced. As a positive side effect, appropriate noise protection is generated at the same time.
Request for a quoteFRIEDR. FREEK GMBH
Germany
The HISDpro - Side Drum Heater is a simple yet effective silicone insulated drum heater for the heating of barrels up to 90°C. The Silicone heating jacket is available in four standard sizes (25 / 50 / 105 / 200 liters) and can be manufactured to customer specifications as well. HISDpro heater jackets are particularly suited to melt soaps, fats, varnishes and oil-based products, or respectively reduce their viscosity. The 200-liter element can be combined with the HBD - base drum heater to reduce the heat-up time. These heater jackets are not only used on drums but also containers and any kind of glass-fibre reinforced plastics. They can be produced with any number of belts, e.g. to enable them to be clamped on to rotor blades.
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Protective hose, flame retardant and insulating against heat and flying sparks for cables
Request for a quoteFESSMANN GMBH UND CO KG
Germany
With its unique heat insulation, the NOVA cooking boiler not only ensures best energy utilisation but also offers uniform heat distribution across the entire boiler bottom for consistently best cooked products. For you, this means a quality increase at reducing costs. Unique heat insulation for best efficiency Uniform heat distribution ensures reproducible cooking processes Various heating types available Volume can be chosen between 300 – 1000 l Hygienic stainless steel design with antidirt edge DPK control included serially Delivery in prefabricated construction considerably shortens the assembly times
Request for a quoteFESSMANN GMBH UND CO KG
Germany
The Nova cooling tanks by FESSMANN convince with their highquality processing and special hygiene designs. This means Allround jointfree welding, use of special antidirt edges and a tank bottom inclined towards the drain. This way, dirt deposits are a thing of the past and cleaning becomes child's play! Unique heat insulation ensures best efficiency Volume can be chosen between 300 – 1000 l Hygienic stainless steel design with antidirt edge Delivery in prefabricated construction considerably shortens the assembly times
Request for a quoteFRIEDR. FREEK GMBH
Germany
Ceramic Insulated (Band) Heaters are predestined for high-temperature applications beyond 450 °C, for example for pipe heating in process heat technology, especially when gases are involved. Ceramic insulated sectional surface heating elements are also brought into action where a heat storage capacity is needed, as in hot plates the case. With the heating surface of ceramic flat heaters being composed by small-limbed ceramic elements with aligned holes in the centre for the resistance coils to be fed through, ceramic sectional heating mats are also applicable for bent or cylindric surfaces. Like Micanite insulated flat heating elements also Ceramic insulated elements can receive a metal sheath. The latter provides additional protection against mechanical load and allows for attaching connection boxes. Another advantage is the easy installation by means of mounting holes in the metal cladding.
Request for a quoteHR-STRUCTURES GMBH
Germany
To protect your goods from condensation or condensation water, it is possible to integrate a special underlay tarpaulin. It consists of mesh fabric, which allows moisture to diffuse from the inside of the hall to the outside. The fields of application of our condensation water protected halls: - Storage for temperature-insensitive goods - protected loading of transporters - protected parking and storage area - Picking for goods of all kinds - Maintenance and repair When single-layer tarpaulins in the roof are no longer sufficient, we at HR-Structures recommend our modern thermal tarpaulins. Produced in membrane technology, the two-layer roof and gable covering has a heat-insulating effect and prevents condensation on the underside of the roof tarpaulin. It consists of two shells, which are filled with air and thus provide additional insulation and protection against condensation. As wall cladding we recommend here the trapezoidal sheet.
Request for a quoteLIPP GMBH BEHÄLTER UND SYSTEMLÖSUNGEN
Germany
Stainless steel digester with a digester chamber volume of 200 to 5000 m3 External panel heating and insulation Optimised diameter to height ratio for optimum mixing and minimal stirring Flexible stirring technology which can be adapted to the substrate and digester Stirring technology can be maintained without having to empty the tank
Request for a quoteFRIEDR. FREEK GMBH
Germany
We offer an extensive range of drum and barrel heaters and container heaters: Heating jackets, silicone drum heaters, base drum heaters and insulating but unheated drum jackets and lids for heating and insulating plastic and metal drums respectively containers. According to the destined application we use polyester, silicone, teflon and glass fibre for our drum heaters and container heaters. Some of the materials are coated and multi-layered resp. combined. Our drum heaters can be used individually and in combination and can be ordered and delivered online (shop.freek.de) for all standard drum sizes (25 / 50 / 105 / 200 litres). Of course, we also manufacture our heating jackets, heating sleeves, base heaters and insulating bonnets individually to fit your container and your special application. HC - Heating cabinets If you heat several drums or containers together or need a container heater for the ATEX area, the heating cabinets from our partner Amarc are the right choice.
Request for a quoteLIPP GMBH BEHÄLTER UND SYSTEMLÖSUNGEN
Germany
WITH DIGESTER CHAMBER VOLUMES RANGING FROM 200 M3 TO 5.000 M3 The LIPP Universal digester which unlike the KomBio reactor does not have an integrated gas accumulator, is used for larger plants for industry and municipalities. The biogas accumulated is either directed into a KomBio reactor combined with the Universal digester or into a separate gas accumulator. KEY BENEFITS Production of renewable energy and reduction of fossil CO2 emissions Low noise emissions Flexible substrate composition Customisable pumping and stirring technology High functional safety Effective insulation results in low heating requirement Quick construction thanks to on site production Low investment costs Low maintenance and durable Consistent quality worldwide PRODUCT SPECIFICATION MODULAR PLANT CONCEPT The LIPP Universal digester essentially consists of a (Verinox) stainless steel tank with a modular design. Panel heating and insulation are fitted on the outside and are easily accessible.
Request for a quoteOHMEX INDUSTRIELLE ELEKTROWÄRME GMBH
Germany
Flameproof mini line heaters ATEX Ex II 2 G Ex’d’ IIC T4-T6 nach EN60079-0 und EN60079-1 The Exheat range of flameproof mini line heaters consist of a screw plug or flanged type immersion heater mounted in a thermally insulated heating vessel. They are designed to efficiently transfer heat to a flowing medium (liquid, air or gas). All flameproof heaters are fully ATEX certified and designed for use in zone 1 & 2 hazardous areas, gas group IIC.
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Protection of sensitive components such as sensors, probes, measuring instruments or semiconductors, such as diodes, transistors thyristors through improving the heat linking to cooling plates or metal housings For optimal cold transfer when using Peltier elements Advantages and benefits Highly effective due to good heat conductivity Electrically insulating Economical due to minimal consumption quantities Resistant to acids and lyes Without significant change in the consistency as well as constant thermal conductivity across the entire temperature range
Request for a quoteNOVELIS DEUTSCHLAND GMBH OHLER® - FLEXROHRE
Germany
Heat protection tubes are made by layering several kinds of aluminum alloy foil and other materials, such as fiberglass and plastic with corrugations. The excellent reflectivity of the aluminum alloy on the external surface reflects radiant heat, and its insulating power additionally serves to protect the aluminum flexible tube’s content from heat sources. These products have great flexibility but high dimensional stability, and they can be compressed or extended as required. They can also be fastened or mounted easily by crimping the end fittings.
Request for a quoteSEIFERT ELECTRONIC GMBH
Germany
Our thermal management and insulation products are far from being just interim solutions. The Thermal Interface Materials (TIM) from Seifert electronic GmbH ensure optimal thermal connection between heat sinks and the components to be cooled. As electronic assemblies become increasingly compact, even a tiny gap between individual components can disrupt the necessary heat dissipation. Air pockets between the heat sink and the component being cooled hinder the optimal thermal connection. Possible consequences include temperature overload, which can lead to overheating in the worst-case scenario. Thermal management and insulation products act as connectors between the heat sink and the electronic component being cooled. They fill every tiny gap between the heat sink and semiconductor with thermally conductive material. This ensures optimal thermal connection and prevents any heat buildup.
Request for a quoteBOSCH INDUSTRIEKESSEL GMBH - INDUSTRIAL BOILERS
Germany
— Ideal for combination with combined heat and power units or gas turbines — Environmentally friendly generation of steam and hot water from available waste heat — High efficiency through efficient tubular heat exchanger and thermal insulation — Cost-efficient to purchase and operate as no burner is necessary
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
CBG COMPOSITES GMBH
Germany
Multilayer refractory construction core based on rock wool and inorganic impregnation matrix for the production of fire-resistant building structures. ✓ 100% natural and inert ✓ non-flammable, according to IMO 2010 FTP Code Part 1, DIN EN 13501 ✓ meets the requirements of the RAL quality mark certification ✓ heat- and sound-insulating ✓ pressure resistant ✓ water-repellent ✓ dimensionally stable with temperature changes ✓ recyclable
Request for a quoteCBG COMPOSITES GMBH
Germany
Contoured basalt-based fibred core to use as a fire-resistant and soundproofing material. Application areas — Fireproof panels for construction industry and engineering — Thermal insulation — Acoustic insulation Properties — non-combustible, in accordance with IMO 2010 code FTP part 1 — heat- and sound insulation — pressure-resistant — water-repellent — stable for temperature changes — recyclable
Request for a quoteCBG COMPOSITES GMBH
Germany
Heat-insulating refractory modules made of biosoluble ceramic fibres based on calcium and magnesium silicates with high thermal insulation values at operating temperatures up to 1,200°C, usable as an insulating and working layer of high-temperature equipment of any construction and type of application with the air velocity < 40 m/s. Available in two densities of 200 kg/m³ and 250 kg/m³. Easy to dispose of without harming the environment thanks to its fibre biosolubility. — 100% biosoluble — high temperature resistance* * with additional CBG special fibre coating up to 1.350°C — low thermal conductivity — good sound absorption — good insulating properties — chemically resistant to acids, alkalis, oil, hydrocarbons and water — good strength — low installation effort — reduced maintenance — environmentally friendly — harmless to one's health — contains no binders, produces no vapours or air pollution
Request for a quoteDIMET GMBH
Germany
USED FOR HANDLING OF - scrap - turnings - burden, metal charge. 75% Duty cycle / Rugged cast case / Special coil design / Heat insulation gasket / Heavy-duty steel bottom plate / High-quality sealing compound. Compatible equipment: Sennebogen, Fuchs, Liebherr, Caterpillar, Hitachi, Volvo etc. Excusive one year replacement warranty
Request for a quoteSANHA GMBH & CO. KG
Germany
The SANHA®-Heat cross tees and distributors on one or two levels provide an optimal solution for both new construction as well as for the housing stock. Tees and distributors can be installed within the heat and footfall insulation in a way that saves time, money, and space. For a particularly easy and time-saving connection of radiators SANHA also offers a nickel-plated CU-VN-block including insulated box available.
Request for a quote1A STAR TECHNISCHE KUNSTSTOFFE GMBH
Germany
DURAVOLTA is a new developed flame retardant and heat stabilized Polypropylene, made in Germany. The main reason for developing this material was to offer a halogenfree material according to IEC 61249-2-21 with outstanding heat and electrical insulation properties. It unites very good technical values, high form stability and ecologically aspects with a very good price-performance-ratio. Advantages: •halogenfree according to IEC 61249-2-21 •outstanding RTI el von 120°C according UL 746B •very good electrical insulation properties by high resistivities and dielectric strength •non hygroscopic •very high chemical resistance •very good processing properties •RoHS and WEEE compliant •producable in thicknesses according your needs •recycable •made in germany Application: •computers and computer peripherals •electrical and power distribution systems •telecommunications equipment •conventional and uninterruptible power supplies •medical equipment and lighting •consumer products
Request for a quoteHITACHI HIGH-TECHNOLOGIES EUROPE GMBH
Germany
Hitachi High-Technologiees Europe GmbH is very pleased to introduce Toyal Vacuum Insulation Panels to the European Market. Our VIP's advantages are represented by Low Thermal conductivity, light weight, opportunity to save space and save energy and its eco-friendly performance. Features Low Thermal Conductivity: The VIP achieves the best performance of insulation in the market. Using the know-how in the field of laminating materials as an aluminum foil manufacturer, with the combination of a new developed core material (glass wool), it achieves superior performance. (a thermal conductivity: in 0.0020W/m, k *1) Leight Weight: Compared to our conventional core material, it is 1/4 lighter. It is the best solution in the wide-ranging field which requires lighter weight, such as automobile, refrigerator, cooler box, thermos, etc.
Request for a quoteRÜHL FEUERLÖSCHMITTEL GMBH
Germany
The key areas of application for this group of PU products are determined by their excellent insulation properties. As highly cross-linked foams (usually with closed cells), they are used in the construction industry, sanitation industry and also in the refrigeration industry. Typical properties Moulded part density of 35–120 kg/m³ Available foaming agents: pentane, hydrofluorocarbons (such as 365/227mfc) and water Special formulations and versions Good heat insulation (lambda value from 22 mW/mK) Spray systems – flame protection formulations Construction industry: DIN 4102 B2, Swiss V
Request for a quoteRÜHL FEUERLÖSCHMITTEL GMBH
Germany
Surfaces with high reproduction accuracy combined with a cellular core to reduce the weight of moulded parts are among the outstanding characteristics of the rigid integral foam product group. In combination with duromer systems, our products in this field feature an extensive range of useful characteristics. Application examples include housing components and covers. Typical properties Moulded part density of 220–900 kg/m³ Shore D hardness of 35–85 Available foaming agents: usually water, but also pentane and hydrofluorocarbons Special formulations and versions Good heat insulation Self-parting formulations possible Good coating and lamination properties Flame protection formulations Electrical industry: UL 94 V0 Construction industry: DIN 4102 B2 Rail vehicle construction: DIN 5510 (S4, SR2, ST2)
Request for a quoteResults for
Heat insulation - Import exportNumber of results
27 ProductsCountries
Company type
Category