Head protection - Import export

Unvented and tested to be Molten Metal (MM) resistant and have a 6point suspension harness. Each is available with either a pinlock headband system or ratchet.

The awardwinning EMAN is a highquality helmet with a modern design that protects against arc flash of up to 7kA (EMAN 7000). For extra protection against impacts, the EMAN range also features ENHA’s patented Crashbox. EMAN is also equipped with a fully retractable visor that protects the entire face.

The awardwinning EMAN is a highquality helmet with a modern design that protects against arc flash of up to 7kA (EMAN 7000). For extra protection against impacts, the EMAN range also features ENHA’s patented Crashbox. EMAN is also equipped with a fully retractable visor that protects the entire face.

Each Rockman helmet is lightweight and feels extremely wellbalanced when in place, thanks to its stable headgear shaped beneath the occipital bone. To crown it all off, the matt finish on the top surface helps to avoid scratch and scuff marks when the helmet is stored upside down.

Each Rockman helmet is lightweight and feels extremely wellbalanced when in place, thanks to its stable headgear shaped beneath the occipital bone. To crown it all off, the matt finish on the top surface helps to avoid scratch and scuff marks when the helmet is stored upside down.

Each Rockman helmet is lightweight and feels extremely wellbalanced when in place, thanks to its stable headgear shaped beneath the occipital bone. To crown it all off, the matt finish on the top surface helps to avoid scratch and scuff marks when the helmet is stored upside down.

ENHA’s Ranger helmets reflect the company’s indepth understanding of customer needs and its ability to address demand through product innovation. They are awardwinning, exceed the demands of EN 397 and include innovative features that are revolutionising the head protection market. Such features include the Crashbox as well as patented oval shaped slots on the side of the helmet which refrain from cracking should permanent pressure be applied from the personal protective equipment attached.

Crashbox Inside optimises energy distribution and dissipation upon an impact to keep the force transfer to the head extremely low.

Crashbox Inside optimises energy distribution and dissipation upon an impact to keep the force transfer to the head extremely low.

Crashbox Inside optimises energy distribution and dissipation upon an impact to keep the force transfer to the head extremely low.

Crashbox Inside optimises energy distribution and dissipation upon an impact to keep the force transfer to the head extremely low.

To better protect the sensor head of the GasPen from dirt, this protective cap can be put on the sensor head.

The unique belt guide system allows the use of very small belt widths without the belt coming off the roller. The tensioning system ensures continual tension in the belt thus contributing to the safety of the guide system. Available in lever or rotary valve variants. Individual work through the rotatable head. Furthermore it has a protective cap for safe handling.

You always know what is going on in your plant: Gas detection system Statox 505 compliant to SIL 2 Standard Intelligent Gas Sensors for AsH 3, Cl 2, ClO 2, CO, COCl 2, H 2, H 2S, HCl, HCN, HF, N 2H 4, NH 3, NO 2, O 2, O 3, PH 3 and SO 2 The Statox 505 new 4 – 20 mA Transmitter for toxic gases and oxygen features everything that a new gas detection instrument of the latest generation needs: State of the Art components (hardware and software), smart sensor technology, “heartbeat” sensor control and complete system diagnostics on board. What makes the Statox 505 so reliable? In process monitoring, the status of plant components in case of a failure is becoming more and more a critical issue. The standards DIN EN 61508 as well as the product standard DIN EN 50402 are powerful tools to calculate the probability of a failure on demand. The Statox 505 complies with all of the requirements of these standards. It obtained the safety integrity level SIL 2. This provides a reliable database for the user to calculate the safety standard of his plant. If the Statox 505 is operated as a SIL 2 component, a so called “proof test” in certain time intervals is mandatory. All OK All important parameters such as sensor „heartbeat“, signal output, calibration, zero, sensitivity, temperature, sensor memory, amplifier, CPU, power supply etc. are continuously monitored for proper function. In case of a failure, an alarm will be triggered. Thus the system cannot fail without the error being noticed. A green LED signalizes the system status. The display and the controls are located at the inside of the housing - well protected from the elements. Minimum time and work in the field The sensors of the Statox 505 are plug and play technology. Each sensor has a F-RAM on board which communicates all relevant parameters to the sensor head: Gas, measuring range, last calibration, ex works calibration, response time etc. The sensors can easily be calibrated in the shop. For the user this means that he never ever will have to do calibration work in the harsh elements (wind, rain, cold, heat). No more lugging heavy test equipment and gas cylinders into the field. All the user has to do in the field, is plug the sensor back in. To do that, you don`t even need a tool! While the sensor is getting calibrated in the shop, the sensor cartridge stays in place and protects the sensor head from dust and rain. Trouble- free wall - or pipe mounting The Statox 505 comes with a mounting plate for either wall - or pipe mounting. No need to open the sensor head for plant installation Storage temperature

Statox 501 Infratox detects gases in the LEL and ppm range. Protecting people and assets from hydrocarbons The infrared absorption method of gas detection is ideal to detect hydrocarbons such as fuels. It features enough sensitivity to expand the range of application into the ppm range. For instance fuels such as gasoline, diesel or kerosene are mixtures of hydrocarbons. Infrared gas detection theory of operation Some gases absorb light at a certain wavelength (colour). This absorption band is specific to the gas. The rate of the absorption depends not only on the substance to be detected but also on the number of gas molecules (i.e. the concentration of the gas). This premise is used to detect gases. For example, the C - H bond in hydrocarbon molecules will oscillate and absorb light at 3, 4 mm. This fact makes it so easy to detect fuels. Hexane, for instance has 14 C - H bonds compared to Methane which has only 4! A light beam is directed through a cuvette filled with the gas to be detected. The more hydrocarbons are present, the more light will be absorbed. A photo detector at the other end of the cuvette measures the remaining light intensity. The difference between the original and remaining light intensity corresponds to the gas concentration. A reference beam with a different wavelength compensates for potential interferences of dust, humidity or variations of intensity from the light source. Fail-safe technology Failure of important components such as the light source or photo detector will trigger a "system fail" alarm. Most local authorities will accept this as a self-diagnostic feature. Systems including a self-check require less maintenance and calibration, saving time and money. Simple maintenance: Easy to read display and non-Vintrusive calibration The bright LED display of the Statox 501 Infratox shows the gas concentration in percent L.E.L. (Lower Explosion Limit). An important accessory is the calibration adapter, featuring control buttons operating Hall-sensors inside the Ex d housing. The service menu is password protected preventing unauthorised access. All parameters can be checked and changed, or a calibration can be done all without opening the transmitter. The adapter is also equipped with a gas outlet so that it can be used for flow-through applications. Impervious compact design The dimensions of the Statox 501 Infratox are small and compact. The sensor compartment is completely sealed, not allowing dust or insects to enter. It is located in the center of the sensor head. This allows heat radiation from the electronics and the infrared lamp to keep the unit a few degrees above the ambient temperature thus avoiding condensation. This innovative design makes any additional heating unnecessary, allowing the sensor head to be very energy efficient. This saves additional money by eliminating more expensive wiring and a bigger power supply that would otherwise be necessary. The sensor head is rated protection class IP 67 (6 = protection even against fine dust, 7 = submerged 1 m deep in water for 30 minutes). You can have confidence that this system will safely operate even in the harshest environment.

The used head protection textile resists liquide metal, sparks and slag. With these characteristics, it is the perfect addtion to our security cutting. in order to keep visual, thermal and dynamic effects of an arc when cutting under voltage cables to a minimum as possible . The heat protective cover protects flammable and temperature sensitive materials for welding- and shringking work. - Asbestos-free, free from hazardous substances - tissue from sicilia fiber, about 96% share of silica (amorphus Si02) - Suitable for temperatures up to 1300&°;C short term, continuous exposure to bis 1100&°;C - The product is not toxic. There is no ecologcially harmful effects known.

This shockproof safety helmet, made of plastic material, protects your head, if you fall whilst hooked up to an arresting system - preventing you from becoming unconscious or being injured through a collision. This lightweight helmet has a chin strap and is equipped with a modern ventilation system. It also offers integrated protection from foreign bodies. EN 397:2012 (safety helmets) Size: 51-63 cm Colour: White Weight: 390 g Air Grid technology keeps foreign bodies out whilst guaranteeing optimum ventilation

MIXACO Container Mixer i4MIXACO has been an innovation leader in the mixing industry for years. With the innovative container mixer i4 we are going one step further into the future. Outstanding mixing flexibility, high quality and reduced cleaning effort to a minimum are its outstanding features. Equipped with the new MIXACO Control Center (MCC) we set a new milestone for highly efficient mixing plants. All advantages at a glance * Flat mixing head * Optimized suction * Dust protected machine components * injection through mixer shaft * different container sizes on one mixer * Reduction of cleaning times * Lifting device with container positioning * High flexibility * New tools for more efficient mixing * Lower energy consumption * No base plate

Highlights • iwis high precision roller chains: long-lasting, reliable, excellent wear resistance • Special lubrication for can manufacturing: non-drip, high temperature range, approved for use in the food industry • Protection heads: high-temperature and high-performance material. Standard type available, other geometries and materials on request. • Length of transport pins can be adapted to customer specifications • Predefined fracturing points in the pins prevent damage within the lines in case of collision (POChain-P/-S) • Transport pins: easily changed on-site without damaging the chain or removing it from the machine (POChain-P/-S)

Safety and wearing comfort are the most important criteria for Protector Style 300, it provides best possible conditions for a easy, secure and modern helmet. Due to the proved Protector-technology in development of helmet interior in combination with high-density polyethylene for helmet shell leads to a very comfortable helmet. Features of Protector Style 300: Weight: 310g 30mm slot in order to combine ear- and face protection Rain gutter High wearing comfort by 4-point interior design Material: HPDE Head sizes: 50-66 cm Approvals: EN 397 VDE Accessories for Protector Style 300: Sweatbands (terry or leather) Chintrap with bungee or cotton Folding face protection Hearing protection

The shape of PF 112 Extreme has been proved in type A segmentation, inside is continually developed: the extensive endurance test in fire container of I.F.R.T (International Fire & Rescue Training) proved, that PF 112 Extreme withstand extreme encumbers. Often used by trainers it has been exposed to high demands. Hereby this helmet could exploit its strengths! MED- approval Helmet type A Made of high performance glass fibre GFK60 good isolation, best protection and low weight without any screw holes from the outside, i.e. no drilling hose in the helmet – 100% stability proven shape with maximal ear freedom comfortable headring leather cushion for easy change 6-point orb-weaving suspension CASCO Disc-Fit™- size adjustments, step less individual fitting to head size (53 – 64 cm), if needed in seconds adjustable Carrier net Loop for hanging up helmet Helmet: EN443:2008 Visor: EN 14458:2004