Grinding mills - Import export

The compact single column vertical lathe (swing diameters of 1,400 to 2,800 mm) is appropriate not only for turning, but, with additional units, can also be used for drilling, milling and grinding. It means that it is possible, in a single clamping, to carry out a full machining operation on the CONTUMAT VCE and not simply turning. The rigid cast construction on this lathe ensures low vibration and accurate cutting; hydrostatic guide rails damp vibrations even further. The technical design and numerous fitting options mean that Dörries is able to configure an individual machine to every customer.

Powerful, long-lived, precise: GMN motor spindles for manual or automatic tool change stand for quality and efficiency, and are well-suited to your grinding, milling, drilling or special applications.

We also sell abrasives for all kinds of surface treatment: Grinding, roughing, milling, polishing. Special tools upon request. Systems: - M-quick - K-quick - ATAdisc - corundum(Plus) - zirconium (Z) - carboorundum - fleece rounds - felt rounds - super brade Ask for our abrasive catalogue or send us your detailed inquiry.

Are you aware of our finishing options for metal and aluminum test specimens? Chemical degreasing, deburring, grinding, turning, milling, punching or blasting – no problem. Upon request, test specimens can be customized and labeled with serial numbers. Contact us to find out how we can help you. By the way: we can manufacture test specimens for the TABER-ABRASER from all kinds of metals.

Turned parts Long turned partes, small turned parts Turned, milled and grinded parts Thread inserts in brass, steel and stainless steel Possible materials: Alloy AlCuMgPb, AlZn5,5MgCu etc. Brass CuZn39Pb3, CuZn40Pb2 etc. Stainless steel 1.4301, 1.4305, 1.4571, 1.4401, 1.4101 etc. Steel Machining steel, St52, St37, C45, etc. Special steels Titan, Hastelloy, Copper, Bronze etc. Surface treatments may be done as follows: Galvanizing, nickel, brown, hot-dip galvanizing, phosphating, anodizing, chrome plating, painting, powder coating, plasma coating, sandblasting, Tuflok coatings. All common surfaces as VDA standard are possible (zinc-nickel, zinc flake). Heat treatments such as Plasma / gas nitriding, carbonitriding, hardening, carburizing, vacuum hardening, tempering etc.

The patented casting resin system ALWA MOULD D consists of two resin components and an aluminium filler. The fast curing of the material allows to produce your own technologically highest quality moulds in just a few hours. As our material is very good castable, compact moulds of any desired volume can be made from our product, such as acrylic baths, boats, etc. (<1 kg – 2500 kg). In comparison to other materials (e.g., glass fibre reinforced plastic), the system is more temperature-resistant, allows castings without air bubbles and does not have to be post-cured. Furthermore, the finished mould is easy machinable (e.g., drilling, milling, grinding, planning, sawing, turning, etc.). ALWA MOULD D moulds can be modified with repair filler, so that a fresh view can be created at an early stage of a new design process and prototypes can be examined at short notice.

As form-fit power-transmission and conveying components, Siegling Proposition timing belts complement the established family of Siegling Transilon conveying and processing belts. Our vast experience in light materials handling guarantees superb product quality, in-depth support and fast service. Siegling Proposition high-efficiency timing belts are made of high-quality polyurethane with an embedded tension member made of steel cord or Kevlar. Thanks to their low mass and extreme tensile strength, they are quiet to operate and require virtually no maintenance. These characteristics make them ideal for demanding tasks like accelerating and braking, as well as for exact positioning. A wide range of coatings, patterns and profiles can be applied to standard timing belts. They can be modified even further by adding perforations, milling and grinding. As a result, the belts are true specialists when dealing with conveying, power-transmission or handling jobs. Product

This spindle is ideal for fine grinding, milling and engraving surfaces that must not be oil lubricated. The centrifugal governor ensures constant speed and reduces air consumption.

This spindle is designed to be very compact, yet it is equipped with a powerful Motor for grinding and milling. Also available: Splash guard and spindle with counterclockwise rotation.

Lightweight, with a proven, low-vibration SRD 355 motor; it ensures high precision and a long operating life. Its lightness and ergonomic form means that you don‘t tire quickly and allows you to carry out delicate deburring. It can be guided like a pencil and is also qualified for fine grinding, milling and engraving operations.

This perfectly constructed machine can be also fitted at the front with a pair of high-performance supports instead of a single one and is, therefore, the ideal tool for extreme and long-term use. It is nevertheless light and sits snugly in your hand. Due to the high speed of this grinder it creates a very clean pattern, which makes it ideal for fine grinding, milling and engraving jobs. The following variants of the machine are available: Support: Single or pair Valve: Rotary or lever valve Exhaust air direction: Backwards or forwards

The Airflex® product line is comprised of a complete range of clutches and brakes designed for industrial applications. First manufactured in 1938 by Thomas Fawick, Airflex® products are recognized around the world as the Original Fawick® Clutch. Today, Eaton‘s Airflex® product line provides solutions for a wide variety of applications ranging from oil rigs to mining shovels to grinding mills to tugboats. Whether your application requires a standard product or a custom solution, the Eaton team is available to assist with all of your product needs. To learn more about how Airflex® products can meet your application requirements, get in contact with Kendrion Industrial Drive Systems.

For light grinding, polishing and milling work. Length: 1.500 mm Shaft core Ø: 6 mm max. Speed: 30.000 rpm Connection to Machine: M10 x 30 threaded Connection Connection to handpiece: square small (5mm)

with its 12,000 rpm this spindle is particularly suitable for tools that require high torque at low speed. At 400 watts this is our most powerful milling and grinding spindle.

This high-speed spindle is particularly suitable for the use with the finest milling and grinding tools. The elastic front bearing enables the production of surfaces of the highest quality. A further application is the drilling of rubber.

This spindle is designed to be very compact, yet has enough power for light grinding and milling. Also available: splash guard and counterclockwise rotation. Technical Data: Order number: 150412702 Power [W]: 200 Air consumption [l/min]: 400 Vibrations [m/s²]: < 2,5 Revolutions per minute [min¯¹]: 32.000 Engine type: Vane Exhaust air direction: Backwards Front bearing set: Paired Noise level [db (A)]: 75 Weight [g]: 365 Max. tool shank Ø [mm]: 6 Max. carbide tool Ø [mm]: 8 Fitting hose unit: 001366529 (not inclusive)

Quick suctioning immersion pumps equipped with the patented "BRINKMANN`s Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions resp. cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The STL serie offers a (SAE) flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 200 l/min Delivery head: up to 80 m Please contact us for delivery quantity

Quick suctioning immersion pumps equipped with the patented "BRINKMANN`s Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions resp. cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The SAL serie offers a (SAE) flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 2600 l/min Delivery head: up to 115 m Please contact us for delivery quantity

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed. All pumps are equipped with a single mechanical seal. Upon request a second mechanical seal is available to allow for dry-running (-GD). This pump series is designed for horizontal installations next to a tank and for pumping air entrained coolant fluids, such as water-soluble coolants or cutting oils, as they occur in high speed turning, milling or grinding applications. The SBA pumps are equipped with the user-friendly (SAE) flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with G 1/4. Volumetric delivery: up to 2200 l/min Delivery head: up to 62 m Please contact us for delivery quantity.

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are self-priming after initial filling. All pumps are equipped with a single mechanical seal. SBM Pumps are mounted next to or on top of the tank and they are suitable for pumping air entrained coolant fluids, such as water-soluble coolants or cutting oils, as they occur in high speed turning, milling or grinding applications. Volumetric delivery: up to 440 l/min Delivery head: up to 20 m Please contact us for delivery quantity.

Quick suctioning immersion pumps series SFL equipped with the patented "BRINKMANN's Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions) with heavy chip loads as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The SFL serie offers a flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 2500 l/min Delivery head: up to 46 m Please contact us for delivery quantity

The best MB20 that we have ever had. What‘s new? • Higher speed of up to 34,000 rpm for finer, more precise work. • The motor is protected from overloading by an automatic cut-out. • Restart protection provides a high degree of safety. • Prolonged motor life through optimum dust protection. Inexpensive to purchase and maintain. Safe to operate. • Cost-effective universal motor in a sturdy plastic shell. • Automatic cut-out if wear occurs to the carbon brushes • Soft start. • Degree of protection: IP 20, Protection class: II Specifically designed for versatile use in mould making • Constant speed under load. • Uses various quick-change hand pieces for milling, grinding, polishing, brushing and filing. • The machine can be operated standing upright or suspended from a hook.

Lifting pumps series TAA gently pump foam-sensitive cooling lubricants (emulsions or cooling and cutting oils) or highly inflated cooling lubricants such as occur with a high degree of machining in lathing, milling or grinding. Impellers: axial Fluids: coolants, emulsions, oils Volumetric delivery: up to 440 l/min Delivery head: up to 9 m Please contact us for delivery quantity

Milling, grinding, brushing, polishing, filing – and all with a single device! This all-rounder is suitable for use in almost all sectors of industry The best results are achieved through digital sensorless control electronics. This ensures: * Consistently high torque at any speed between 5,000 and 15,000 rev/min. * Constant speeds at different loads. * Retrieval of power reserves: at maximum load a remarkable peak power of 1.5 kW. Above this the machine is shut down by the overload protection. * No pulsation in the low speed range. * Work results in smoother surfaces. Low maintenance costs and no unnecessary downtime * The motor is protected from overloading by an automatic cut-out. * Automatic cut-out if wear occurs to the carbon brushes. * Fully encapsulated sensorless electronics cannot be clogged with metallic particles. * Electrical surge protection prevents current peaks and protects the motor. Delivers the highest attainable degree of occupational safety and comfort.

Developed for slight to heavy grinding and milling for tool and mold making, as well as for deburring, fettling and brushing work in foundries, container and steel construction and mechanical workshops. The lightest and most compact machine in its class for the toughest jobs. * Unbeatable power-to-weight ratio with 2.8 kW at 34 kg. * Ultra-strong asynchronous motor ("continuous runner") with top efficiency. * Indestructible, absolutely maintenance-free, virtually no wear. * Particularly suitable for large tool diameters. * Ideal for working on large surfaces. * Motor overload protection. * Constant speed under load. Comfort and safety features: * Wide range of possible combinations for shafts and handpieces. * Machine can be operated free standing, on table stand or on travelling stand. * Restart protection. * Soft start. * Protection class: IP 55, protection class: I

The Leica EM TXP is a target preparation device for milling, sawing, grinding, and polishing samples prior to examination by SEM, TEM, and LM techniques. An integrated stereomicroscope allows pinpointing and easy preparation of barely visible targets.

The GWE 5106 combined the advantage of the GWE 5104 Servo-Insert Coupling with an easy installation. The clamping hubs in split hub design can be mounted lateral at the aligned shaft extensions. Backlash-free Servo-Insert Couplings are used in mechanical engineering, where shock absorption is requested and pluggable coupling solutions are applied. Special Features Backlash-free Pluggable Vibration damping Torques from 0,5 - 650 Nm Compensation of radial, axial and angular misalignment Electrically isolating Common Applications Encoder Precision drives Feed drives Grinding and milling spindles Machine tools Packing machines Robotics Transfer lines Multi-spindle heads Wood processing equipment Textile machinery Conveying equipment Linear motion Measuring equipment and control technology Test rigs Series GWE 5106 Servo-insert coupling with clamping hubs in split hub design Characteristics Hubs made of aluminum, from size 55 made of steel Standard elastomeric spider with 98° A...

The GWE 5107 is a compact designed backlash-free Servo-Insert Coupling with an expanding clamp and a clamping hub. Due to the expanding clamp the GWE 5107 can used for examples in hollow shafts. Backlash-free Servo-Insert Couplings are used in mechanical engineering, where shock absorption is requested and pluggable coupling solutions are applied. Special Features Backlash-free Pluggable Vibration damping Torques from 0,5 - 650 Nm Compensation of radial, axial and angular misalignment Electrically isolating Common Applications Encoder Precision drives Feed drives Grinding and milling spindles Machine tools Packing machines Robotics Transfer lines Multi-spindle heads Wood processing equipment Textile machinery Conveying equipment Linear motion Measuring equipment and control technology Test rigs Series GWE 5107 Servo-insert couplings with clamping hubs and expanding clamps Characteristics Hubs made of aluminum Expanding mandrel and inner cone made of steel Elastomeric spider...

GERWAH's Servo-Insert Couplings from the production series 'GWE 5103.1' impress with their compact design. The compensating elements are slotted once and mounted by means of a clamping hub. GWE 5103.1 couplings are electrically insulating, installation-friendly and absolutely fail-safe. Backlash-free Servo-Insert Couplings are used in mechanical engineering, where shock absorption is requested and pluggable coupling solutions are applied. Special Features Backlash-free Pluggable Vibration damping Torques from 0,5 - 650 Nm Compensation of radial, axial and angular misalignment Electrically isolating Common Applications Encoder Precision drives Feed drives Grinding and milling spindles Machine tools Packing machines Robotics Transfer lines Multi-spindle heads Wood processing equipment Textile machinery Conveying equipment Linear motion Measuring equipment and control technology Test rigs Series GWE 5103.1 Miniature servo-insert Coupling with clamping hubs and single...