Glues and adhesives - Import export

The Two-Flap-Bag can be filled from two sides. The upper opening is the header part for packing your printed advertising. The lower opening is used for packing your products. Both flaps have got an adhesive glue strip. With this bag it is possible to use the same bag size for different products with individual advertising in the header. The bag is available out of high transparent glossy OPP and also CPP (PPCast). Sizes, materials and material thicknesses according to your requirements two adhesive glue strips with Euro Hole if required with or without printing up to 10 colours in flexo or gravure printing

Foil cuts are available in your sizes and materials. They are used as separation layers. Revenue seals (Bands) are suitable for the bundling of your greeting cards, magazines or to create multiple packages. You can get the revenue seals open or closed. We are offering the revenue seals in high-transparent PP (OPP, PPCast) or in PE (LDPE). Very comfortable are the bands incl. glue strip. widths and material according to your specifications open or closed execution open band with or without adhesive glue strip with or without printing up to 10 colours in flexo or gravure printing

The bottom fold bag has got a fold in the bottom being sealed with the side seam. It is an ideal solution for packing higher filling heights – especially where flat bags are not really suitable. It is possible to put a base fold into flat bags, stand bags (Header bags) and carrying bags. sizes, materials and material thicknesses according to your specifications with or without flap with or without adhesive glue strip with or without flexoprinting up to 10 colours in flexo or gravure printing

The ENOL Standbag (Headerbag) is highly suitable for the hanging presentation of flat and light objects. 1st class raw materials and a proper finishing leads to a perfect presentation of your products. In case of standing or lying presentation, a printed header may draw addition attention towards your products. Our Standbag (Headerbag) is available with filling from the bottom or top. The standbag is available in: high transparent, high glossy OPP transparent, glossy CPP (PPCast) LDPE Sizes, material and foil thickness according to your specifications also in big sizes with or without head-strengthening inlay PP executions with stable ultrasonic knurling with or without Eurohole round hole for ventilation (one or several) with our without flap (also angle cut) with or without adhesive glue strip filling from above or below optionally (new) with zipper, filling from above with or without printing up to 10 colours in flexo or gravure printing

The flat bag is the universal type for most kinds of use. You can obtain the flat bag in various designs, in your required sizes and foil thicknesses. First class raw materials and a proper finish lead to a perfect presentation of your products. Your products are protected against dust, dirt and weather influences. Materials high transparent and glossy OPP metallized OPP transparent and glossy CPP (PPCast) transparent or coloured LDPE, MDPE and HPDE laminates in different compositions (also combined with pure aluminium) Our flat bags are available in sizes, material and material thickness according to your specifications with or without flap (also angle-cut) with or without adhesive glue strip with or without eurohole lso with punch-out for wire-o also in blocked execution with tear-off perforation with or without printing (flexo or gravure printing up to 10 colours)

▪ Hygienic design for food, cosmetic and pharmaceutical applications ▪ Easy integration into automated processes due to compact design ▪ Length and weight savings compared to existing pumps ▪ Short cycle times ▪ Non-destructive dosing of solid containing materials with diameter of up to 20 mm ▪ Volumetric dosing and filling, regardless of viscosity ▪ For low to high viscosity materials ▪ Long service life even with abrasive and shear sensitive materials ▪ Continuous dosing, pulsation free ▪ Precise filling with high repeatability ▪ Linear relation between dosing volume and rotational speed ▪ Programmable suck-back prevents dripping or stringing of product ▪ FDA compliant elastomers ▪ Wetted components are autoclavable ▪ Stainless steel ▪ Optional flushing connection for optimum results with CIP ▪ Easy cleaning and maintenance due to quick assembly and disassembly options

The ViscoDuo-VM 2-component dispenser is a valveless dosing system for static mixing based on the proven progressive cavity technology and thanks to its purely volumetric precise dosing principle, is ideally suited for high-precision dosing tasks. Built according to modular structure, a configuration of the 2-component dosing systems as well as maintenance and part exchange at module level is possible. The material components are mixed downstream of the mixing head only in the mixing tube to prevent material hardening in the system components of the mixing head. Your advantages: - repeatable dosing volume even with viscosity and density fluctuations - Processing of low to high viscosity materials with low to very high filler content - Dispenser and mixing head segments can be combined in size due to modularity - standard equipment with dead space-free integrated dosing pressure sensors for online process monitoring - simple assembly/disassembly of the components

IFA Technology GmbH has been working for the wood-based materials and panels industry for more than 35 years. Our liquid dosing and solids dosing systems offer various applications for optimising your processes. IFA Technology has made a name for itself in the wood-based materials industry and is known worldwide. Application of plants and systems for the wood-based materials industry: Storage, mixing and dosing of liquids such as impregnating resins, adhesives, glues, flame retardants and biocides Reactor systems for the production of glues and phenolic resins, urea resins or melamine resins

These systems can only be fastened by adhering (glue or double-sided tape). Adequate adhesive is available from specialised trade. The following materials can be found at the rear: A18B-Ks: Polyamide (PA) A22B-Ks: Polyamide (PA) A31B-Ks: Galvanised steel AS031NdB-00s-03: Polyamide (PA) A43B-Ks: Polyamide (PA)

Working with the HB 950 is ideal if the hot-melt adhesive is applied from above. By hanging the hand gun on a balancer, you can work in a way that is gentle on the muscles and tendons. The safety and protection of the user are ensured by the insulation of the handle, which also does not transport any adhesive. A 1.2 mm bead nozzle is pre-assembled. The standard version has a PT100 temperature sensor, others are available on request.

The one4all 2B multi-bore nozzles are available with 2 bore holes for bead application. Compatible with Nordson H200 / H400 / SolidBlue / MiniBlue Compatible with Robatech and ITW-Dynatec (Micro) Suitable for BÜHNEN Different diameters for dot and bead application

The NS30 hot melt hoses serve as a heated and flexible transport route for hot-melt adhesive, from a melter to a bead application head. The hoses are available in different lengths and nominal widths (=diameter of the hose inner core). Should you not find the length you require here, please contact us. Standard: PT100 or FeCuNi sensor, nominal width NW08 and NW13, High-Flex version Optional: Spray version

This type enables reactive hot-melt adhesives, such as Polyurethane (PUR) or Polyolefine (POR) from aluminium cartridges to be processed. It is also possible to work horizontally or overhead. The devices are equipped with an innovative level control to provide information on the fill level in the cartridge.

Pull-off forces reduced by 30% for fatigue-free working Microprocessor controlled, continuously adjustable temperature control +/- 1 °C Digital status display integrated in handle Temperature locking Stroke limiter allows exactly the same quantity of glue to be applied repeatedly (distance of trigger to grip can be adjusted to fit to all hand sizes) Very high dispensing capacity Removable nozzle (standard diameter 3.0 mm) Available in case Removable stands Fixture for use of a balancer

It’s in a class of its own: the smallest model in the wing.line® design series. Slim, black, blue and with a removable power plug. The device is able to process a stick without a power connection. Short-term applications outside or away from the workplace are now possible. The stand (removable) enables the gun to stand safely on the worktop. Without the stand, it can be used in places that are hard to reach. The illuminated on/off switch shows at a glance whether the device is switched on. 125 watts ensure that the operating temperature is quickly reached. The mounted 3.0 mm nozzle can be replaced if desired. Smaller and larger nozzle diameters are available on request.

Static cling A4 info pocket specially designed for curved glass surfaces. UV and heat-resistant. • Display information on interior flat and curved glass surfaces such as car windows • For documents in A4 format such as offers and price lists • Static-cling adhesion (no glue) • Heat-resistant and shape retaining up to 70°C • UV-stabilised for up to 2 years • Residue-free removal for long-term reuse • Documents can be easily replaced via the insert aid at the back • For portrait and landscape formats

SCHÜTZE spray valve MKD-IS R/F The spray valves are electro-pneumatically controlled spray valves. They are suitable for spraying release agents, oils, colours and in version KLS also for glues and adhesives. The specific features are the regulation for atomizing air, separate for cone and middle holes and the integrated control valve for pre- and purging air. nozzle and needle: stainless steel available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5 mm ø

SCHÜTZE extrusion valve MMDV/MV (LV/KV) Small design. Suitable for application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV). nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE extrusion valve MMKD 30 Very fast and exact valve for continuous or intermittend application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV) nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE extrusion valve MMDD LV Small design. Suitable for application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV) nozzle : stainless steel needle : tungsten carbide available nozzle dimensions : 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE extrusion valve MMDV and MMDV LV/KV Small design. Suitable for application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV) nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE Extrusionsventil MMKD 50 Very fast and exact valve for continuous or intermittend application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV). The extreme short control air distances and the high speed solenoid gives this valve very fast and exact needle intermission cycles up to 200 cycles per second. nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

We manufacture machines for making books with hardcover and supply more than 10.000 articles such as board, paper, cloth, glue, adhesives to make books with hardcovers