Gas on - Import export

Test gas set for testing gas detection and gas measuring devices GPL and GPD. According to the DVGW rules, a weekly check with 1 vol% CH4 is necessary. With screw-on extraction adapter and display of the flow. Delivered with conditioning filter in a carrying case (not including GasPen).

ZWP is one of the leading independent manufacturer in Germany for gears, pinions and rim gears. We supply already well-known manufacturers for gear boxes. We are looking forward getting intouch with you to have a conversation about possibilities for your supply. Sectors of our (international) customers are: Mining, Oil, Offshore, rail and ship transmissions, industrial transmissions and many more fields of applications. Overview about the capabilities for production: Gears internal and external toothed hardened and grinded Module 2 – 50 mm Diameter 100 – 2,000 mm Internal toothed rings / rim gears hardened and grinded Module up to 20 mm - more on request Diameter 100 to 1,800mm Pinions and shafts internal and external toothed hardened and grinded Module 1 – 50 mm Diameter 50 – 500 mm Length up to 1,500 mm Hardening and balancing inhouse possible Cooperation with companies for special manufacturing of gears and pinions etc We speak English.

What you can expect with an APROVIS FriCon: - FriCon systems are ready for connection - The FriCon removes the moisture from the process gas by dropping below the dew point temperature - FriCon gas heat exchangers operate at elevated pressure, ambient pressure and negative pressure - Condensate formation in downstream gas lines is avoided - Suspended matter is separated - The FriCon is available in different sizes and designs

What you can expect with an APROVIS ActiCo: - Careful gas purification - Reduction of emissions - Damage prevention - Higher operational reliability - An improved combustion process - An extended activated carbon service life

We also supply renowned customers on an international level with our products for conveying technology (gas and oil extraction) and their gear units. Here is an overview of our production possibilities: Overview about the capabilities for production: Gears internal and external toothed hardened and grinded Module 2 – 50 mm Diameter 100 – 2,000 mm Internal toothed rings / rim gears hardened and grinded Module up to 20 mm - more on request Diameter 100 to 1,800mm Pinions and shafts internal and external toothed hardened and grinded Module 1 – 50 mm Diameter 50 – 500 mm Length up to 1,500 mm Hardening and balancing inhouse possible We manufacture for different customers: railway, wind power, shipping, conveyor technology, industry and special machine construction. Production is carried out according to customer drawings and standards. Further information in the first interview. We look forward hearing from you.

The QuellTech laser sensor family Q4 or Q5 used for these tasks is generally mounted on an arm of a rotational axis, to scan along the complete 360° angle of the internal surface in a sequence of strips. The Q4 sensors can also be used to control the weld seam tracking itself for rapid setup and ease of use. Even during a project, the range and scope of the Q Series sensor demonstrates the advantages of a modular system to quickly adapt to project needs, where the smallest system has provided fast analysis of pipes as small as 105mm. The low power, with standard communication protocols, enable battery powered systems to transmit wireless data to other systems for review and cloud back up.

air regulation, needle valve, tube Ø 28 mm, head Ø 32 mm

double lever stop-cock, pilot flame, DIN 30665

air regulation, double lever stop cock, pilot flame

air regulation, stop cock, pilot flame

air regulation, needle valve, pilot flame, DIN 30665

air regulation, needle valve

air regulation

air regulation, needle valve

double lever stop-cock, pilot flame

air regulation, double lever stop cock, pilot flame

air regulation, stop cock, pilot flame

air regulation, needle valve

air regulation, DIN 30665

safety pilot, thermocouple, G 1/4 screwed left-hand, air regulation, needle valve, pilot flame, DIN 30665

air regulation, needle valve, tube Ø19 mm, head Ø30 mm

safety pilot, thermocouple, air regulation, needle valve, pilot flame, DIN 30665

What you can expect from an APROVIS process gas heat exchanger: - Suitable for low and high temperature ranges - Operating pressures up to 160 bar - Compact design for use in confined spaces - Suitable for a wide range of gases - Implementation of customised solutions

Separate water easily from your oil and gas streams From bonded fiber to sintered porous media, Porex creates media to separate or filter water from oil and gas streams. Specifically designed for your oil and gas application, our water separation media: Reduce material usage - Porex bonded fiber material products can replace the need for multiple medi layers commonly found in oil/water separation filters. Self support - Filters can be self-supporting and customized into various shapes and sizes. request sample ask an engineer

length 155 mm

ATMOSPHERIC PRESSURE, MAINTENANCE FREE AND PROTECTED AGAINST EXTERNAL EFFECTS The pressureless gas storage system of Lipp is used for the storage of gas produced on landfill sites, waste water treatment plants and also as external storage on biogas plants. The system is determined by its robust and technical advanced construction where the gas balloon is protected by a galvanized steel tank. This protects the balloon against UV light and also other external factors. The system is mostly utilized at landfill sites or WWTP to buffer the gas before its further processing. The experience gained during the past decades has improved the complete system and the single components and makes it a perfect choice for end users and general contractors.

For checking the gas detection and gas measuring devices. All gases can be connected in 12 liter aluminum pressurized gas cans.

You can find the gas concentration needed for each device in the user's manual. There are additional costs for shipping by air freight. We recommend using the test gas set or a sampling valve.

Test station for checking the gas detection devices according to G465. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. Rather than a pressure gauge, the PS 403-US has a vacuum manometer. In the PS 403-US model, the control buttons are replaced by toggle switches. With flow measurement. The test gas is conditioned (humidified)