Frost frost - Import export

Leak detector high detection sensitivity for pressurised piping and containers, e.g. on compressors, steel bottles, fittings, shut-off valves, breathing devices, oxyacetylene gas and inert-gas arc welding devices, Bunsen burners, valves, screw fittings of compressed-air lines etc. Suitable for compressed air, refrigerant, acetylene, butane, natural gas, carbon dioxide, gaseous oxygen, propane, town gas, nitrogen, hydrogen and, ammonia Suitable for checking the safety of systems with combustible gases and for avoiding financial losses through unrecognized leaks Advantages and benefits Frost-proof to -15°C Saves energy and warns of gas loss Contains corrosion protection inhibitors Tested by the DVGW in accordance with DIN EN 14291 Non-combustible Economical in use

Other sizes available on request

Can be used in summer and winter months. With a tested DEKRA recipe. Other sizes available on request

Complete ready to install heating mats, with or without spare heating cable, consisting of heating cable – completely embedded in a hard PVC film – and cold lead, length to customer specification, up to 180 m possible. The approved heating mat developed by Klöpper Therm works against the penetration of cold in to the ground and prevents upheaval of the ground and destruction of the foundations. Cold stores and cooling chambers give off cold to their environments. In the area of partly or fully sunk in the ground supports, foundations and floors the underlying soil receives the cold. If the natural heat flow from the environment and the earth is insufficient, the moisture in the ground freezes, expands and the ground is lifted. Depending on the nature of the ground, this may cause substantial damage to buildings. Frost heave protection in cold stores and cooling chambers is, therefore, an essential and a reliable preventative measure against frost damage and damp.

Complete ready to install heating mats, with or without spare heating cable, consisting of heating cable and cold lead, length to customer specification, up to 180 m possible. Heating mats from Klöpper Therm work against the penetration of cold in to the ground and prevent upheaval of the ground and destruction of the foundations. Cold stores and cooling chambers give off cold to their environments. In the area of partly or fully sunk in the ground supports, foundations and floors the underlying soil receives the cold. If the natural heat flow from the environment and the earth is insufficient, the moisture in the ground freezes, expands and the ground is lifted. Depending on the nature of the ground, this may cause substantial damage to buildings. Frost heave protection in cold stores and cooling chambers is, therefore, an essential and a reliable preventative measure against frost damage and damp.

Production Process of resealable stand up food bags A: Artwork confirmation B: Printing cylinders making C: Prepare raw material accordingly D: Printing E: Lamination F: Slitting or folding G: Bag making/cutting H: Final inspection J: Delivery Other information of resealable stand up food bags A: We are specialized in making all kinds of packaging materials, such as food bags, coffee bags, zipper bags, ziplock bags, stand up pouches, block bottom bags, aluminium foil bags, pet food bags, tobacco bags, fruit packaging bags, vegetable packaging bags, paper bags, tin boxes, hole puncher for plastic bags. B: We do printing according to your design artwork, just send us layered design in AI or PDF or PSD format. C: The MOQ is 10,000 pcs, the more the cheaper D: Similar samples are available Disclaimer: All trademarks and pictures shown here are as example of our production capability, they are not for sale, and they are the property of their owners.

Tapping of water is also possible during frost periods because the hydrant is completely emptied when in „closed“ Position. Simple emptying per Drainage. Wear-free operation due to the use of ceramic disks. Water jet and flow rate are alterable by use of different tap aerators. Non-return valve in the water inlet. Free choice of location (a wall etc. is not necessary). Hydrants are also available with lockable handle. height: 1400mm outlet: 150mm Art.-No.: 376797 height: 1400mm outlet: 250mm Art.-No.: 376803 height: 1400mm outlet: 300mm Art.-No.: 376810 height: 1600mm outlet: 150mm Art.-No.: 376827 height: 1600mm outlet: 250mm Artikelnummer: 376834 height: 1600mm outlet: 300mm Artikelnummer: 376841 height: 2000mm outlet: 250mm Artikelnummer: 376858 height: 2000mm outlet: 300mm Artikelnummer: 376865

Using a box, the water transfer point is shifted from the inside of the building to the property boundary – in this way the water supplier can access the water meter at any time. The BEULCO water meter box with protection from frost is planned for the installation of water meter systems outside buildings. The box is not only suitable for the house connection, but also for the connection of cemeteries, parks, garden plots, camp sites, green areas or of similar fields. — Modular design — High qualitative components inside — water meter is protected against penetrating water — water meter is installed frost-free — different covers for different load classes — 40% less weight than comparable products The connecting conduits in basic version are equipped with pipes, diameter 32 (DN25), proven by DVGW. Both conduits consist of a pipe instead of a thread connection and can be joined comfortably by means of various PE pipe connectors, either by screwing, plugging-in or welding.

Using a box, the water transfer point is shifted from the inside of the building to the property boundary – in this way the water supplier can access the water meter at any time. The BEULCO water meter box with protection from frost is planned for the installation of water meter systems outside buildings. The box is not only suitable for the house connection, but also for the connection of cemeteries, parks, garden plots, camp sites, green areas or of similar fields. — Modular design — High qualitative components inside — water meter is protected against penetrating water — water meter is installed frost-free — different covers for different load classes — 40% less weight than comparable products The connecting conduits in basic version are equipped with pipes, diameter 32 (DN25), proven by DVGW. Both conduits consist of a pipe instead of a thread connection and can be joined comfortably by means of various PE pipe connectors, either by screwing, plugging-in or welding.

Using a box, the water transfer point is shifted from the inside of the building to the property boundary – in this way the water supplier can access the water meter at any time. The BEULCO water meter box with protection from frost is planned for the installation of water meter systems outside buildings. The box is not only suitable for the house connection, but also for the connection of cemeteries, parks, garden plots, camp sites, green areas or of similar fields. — Modular design — High qualitative components inside — water meter is protected against penetrating water — water meter is installed frost-free — different covers for different load classes — 40% less weight than comparable products The connecting conduits in basic version are equipped with pipes, diameter 32 (DN25), proven by DVGW. Both conduits consist of a pipe instead of a thread connection and can be joined comfortably by means of various PE pipe connectors, either by screwing, plugging-in or welding.