Flexible elements - Import export

We are using CNC - technology for the laying of thin and insulated heating wires on a variety of carrier materials in order to manufacture all kinds of heating elements. We can work up to sizes of 2 x 2 m, and we can realize medium series (500 - 10.000pcs.) as well as high volume productions (up to 1 million pcs.). All voltages from 3,7V up to 480V are possible. With our elements we can reach temperatures of up to 200°C. Please do not hesitate to contact us!

Torsionally flexible claw couplings MULTI MONT SELLA * compensate for axial-, radial- und angular misalignments * absorb shocks and vibrations * are fail-safe and withstand high overloads * are well suited as plug-in type couplings ensuring ease of assembly and alignment * allow prompt and easy radial change of the flexible elements by sliding bakc the retaining cap * are maintenance-free * are customizeable for almost every type of mounting situation * easy and simple assembly of the shaft connections thanks to taper bushes

Highly torsionally flexible coupling ARCUSAFLEX-VSK for drive shafts * Linear torsional deflection characteristic * Elements available in different torsional stiffnesses * Enhanced damping capacity through frictional damping * Maintenance-free coupling bearings * Radial bearing close to the cardan joint * A variety of designs for different cardan shaft configurations * Many types with SAE connection dimensions or as specified * Compact construction, the highly flexible element being protected by the housing * Fail-safe device visible from the outside for ease of inspection

—>Highly flexible transfer element with high torsional elasticity —>High torsional vibration and shock load damping capability —>Compensation of misalignments and easy positioning of the drive and drive train possible —>Direct connection to flywheels according to specification Ready-to-install custom solution —>Diverse designs achievable with modular construction —>Compensation of axial, radial and angular displacements —>Radial (dis)assembly of the coupling element —>Maintenance-free —>Extended range of application due to Atex certification in accordance with Directive 2014/34/EU

The flexible Reich MULTI MONT ASTRA coupling is a fail-safe claw coupling with flexible element for a torsionally flexible shaft connection. The advantages of the all over machined MULTI MONT ASTRA coupling, and of the claw flanks in particular, are the precise running characteristic and the extended service life. The most salient characteristics and advantages of the MULTI MONT ASTRA claw coupling: compensate axial-, radial- and angular misalignments absorb shocks and vibrations fail safe and withstand high overloads The series covers a range of 10 different sizes with nominal torques from 10 Nm to 2400 Nm well suited as plug-in type couplings ensuring ease of assembly and alignment maintenance-free We are glad to see that you are interested in our product line and are happy to answer all questions! Please use our contact form or call us: +49 234 959160. For additional information regarding designs, sizes or technical details please make use of our download opportunities...

MULTI MONT couplings have been built in series since 1958. This pluggable claw coupling that has been successfully proven over a number of decades has been permanently updated to the state of the art, and the MULTI MONT SELLA, MULTI MONT DEKA and MULTI MONT GIANT series nowadays cover a torque range from 40 to 1 000 000 Nm. Advantages of MULTI MONT-SELLA, -DEKA, -GIGANT: compensate for axial-, radial- und angular misalignments absorb shocks and vibrations Series spans 22 sizes covering torque ranges from 40 Nm to 1 000 000 Nm are well suited as plug-in type couplings ensuring ease of assembly and alignment allow prompt and easy radial change of the flexible elements are maintenance-free are customizeable for almost every type of mounting situation We are glad to see that you are interested in our product line and are happy to answer all questions! Please use our contact form or call us: +49 234 959160. For additional information regarding designs, sizes or technical details...

Test bench couplings are applied in miscellaneous test benches. By reason of manifold, specific requirements TOK system is designed according to the modular design concept, to be applicable on almost every engine test bench. For specific requirements, e.g. special-test benches, the standard parts can be combined with specific-designed parts to derive solutions corresponding to individual conditions. Advantages of the TOK-ZW coupling system: Lowest possible torsional stiffness utilizing two flexible elements Simple adjustment of the torsional stiffness by changing of elements Compensation of axial-, radial- and angular misalignment Self-centering, backlash-free and maintenance-free Flanges adapted to DIN or SPICER bolt patterns, respectively on demand Variable installation lengths utilizing telescopic spacer shafts Ideal for highest speed Lowest possible weight by using high-tensile aluminium and CFRP We are glad to see that you are interested in our product line and are happy...

The highly torsionally flexible ACRUSAFLEX-VSK coupling is used in a drive train when a large shaft displacement or an extended distance between the drive and the driven components must be compensated. Depending on the arrangement of the drive train components, a non-uniform motion of the speed may result, and since cardan shafts exhibit some torsion flexibility, the mass of the prime mover and driven machine may induce a resonant system. Advantages of the highly tosrionally flexible ARCUSAFLEX-VSK couplings: Linear torsional deflection characteristic Elements available in different torsional stiffnesses Enhanced damping capacity through frictional damping Available in 9 sizes: from 390 Nm to 20.000 Nm Maintenance-free coupling bearings Radial bearing close to the cardan joint •A variety of designs for different cardan shaft configurations •Many types with SAE connection dimensions or as specified •Compact construction, the highly flexible element being protected by the...

The Nomex heating band is an inexpensive solution for applications where a flexible heating element with low power (max. 1 W/cm²) and for max. temperatures of 150 °C is required. A well-established application is it's utilization as standstill heater to prevent condensation and frost damage when motors stand idle in cold environments. Standstill heaters reliably keep motors or electrical machines above the dew point and ensure safe operation even in harsh ambient conditions. The minimum width of the heating element is 12 mm with a maximum length of 1000 mm, bending radii of at least 15 mm are possible.

For marine applications we produce hoses and technical hose products in dimensions from 15 to 1600 mm, in variable lengths and for suction and pressure purposes from 1.0 bar vacuum to 150 bar WP. Temperature resistant from –40°C to +1200°C. We are in possession of testing certificates of various certification and classification companies for these products. APPLICATIONS Exhaust hoses Aramide hoses Fuelling hoses Bunker hoses Steam hoses Deck washing hoses Fender Fish suction hoses Flat hoses Flame-resistant hoses Flange hoses High-pressure hoses Cable protection hoses Expansion joints Fuel hoses Coolant hoses Product transport hoses Suction and pressure hoses INDUSTRIAL HOSE As connecting piece or coupling in pipelines. SPIRAL HOSE Movable connecting element in pipelines for suction and pressure purposes. CORRUGATED HOSE Highly flexible connecting element in pressure and vacuum applications in all peripheral feed and drain lines. EXPANSION JOINT Flexible compensator with...

For the general mechanical engineering industry we produce hoses and technical hose products in dimensions from 15 to 1600 mm, in variable lengths and for suction or pressure applications. To handle solid, liquid and gaseous media at temperatures from -40°C to +260°C. Below you will see a selection of possible connections, also customised with a wide range of couplings: INDUSTRIAL HOSE As a connecting hose or coupling in pipelines. SPIRAL HOSE Flexible connection for pipelines for suction and pressure applications. CORRUGATED SPIRAL HOSE Highly flexible connecting element in pressure and vacuum applications, in all peripheral feed and drain lines. EXPANSION JOINT Flexible compensator with high vertical and axial tension and pressure-resistance in all areas. HOSE ELBOW Stable-shape connecting element, either for suction and/ or pressure in any geometry. CONNECTIONS We offer customary fittings for our hoses, for bonding-in or vulcanised on. Please see “SIMON – Hose...

We can offer flexible heating elements manufactured from three different insulation materials: silicone, polyimide (Kapton) or polyester. Each of these materials possess different properties which make them suitable for diverse applications. Silicone heaters can also be produced in very large sizes, whereas polyimide is significantly thinner and polyester unbeatable in price when it comes to high quantities. All three of them are bespoke products made according to your needs, so within the bounds of what is technically feasible you as the customer can determine almost every feature of your heater. This can include; voltage, wattage, dimensions, shape, sensors, leads, plus much more. Due to their low thermal mass flexible polymer insulated heaters distinguish themselves by a very short response time and excellent controllability.

In general, a Kapton film heater is always more expensive than a silicone heater or polyester heater. Where chemical resistance or the weight of the flexible heating element plays an important role, however, Kapton heaters are the ideal solution. The resistance of Kapton Polyimide to fungi, bacteria, ozone, weather, ageing and most chemicals, acids and solvents is very good, so that heating elements made of Polyimide (Kapton) are an ideal solution for many critical applications. Kapton foil heaters are also silicone-free and are characterised by an even heat distribution. The dielectric strength of a Polyimide film is very high and so the flexible Kapton (Polyimide) heater can be very thin. Due to the small thickness, the heat transfer to the component is improved and higher surface loads are possible. Typical applications for Kapton film heaters are: Laboratory technology, aircraft electronics, printers, diagnostic instruments, vacuum chambers, medical equipment and many more.

AViTEQ-trough conveyor are suitable for conveying and metering of pourable bulk material up to almost any particle size. By ensuring robust and open, trough-shaped structure are particularly suitable conveyors in extreme environmental conditions, because of the easy cleaning ability, but also happy in the chemical and food industry. Advantages & benefits Wide range of applications: using magnetic vibrator drive(s) or vibrator(s) dust-proof versions available long conveying inserted through serial connection possible multiple drive possible execution in mild steel or stainless steel Construction Conveyors are characterized by their simple design. The main components are: conveyor with drive traverse drive in-/outlet pipe (covered variants) elastic support elements flexible seals Selection The sizing is dependent on: bulk material throughput required geometry possible installation mass Key figures length: up to 9,000 mm on single units, theoretically unlimited for conveyor lines

The AViTEQ Hopper discharge unit is used below hoppers, silos, bunkers or bulk containers for flowable bulk materials and serves as a combined closure, discharge, transportation and metering device. It is used where high material flows are required. Short hopper discharge units are mounted directly below the bulk hopper. Depending on the bulk material, the discharge unit can be fitted with appropriate protective linear and sealing systems. Advantages & benefits robust design and therefore long-lasting variable feeding speed with magnetic vibrator for optimal dosing to the process bunker closure without additional barriers arrangment central below the bunker run, simple and professional installation possible upon request, in a dust-tight design to save the environment Construction The main components are: conveyor bunker shoe for product guiding inside the feeder drive elastic support elements optional: flexible sealings optional: needle or blade gate for closing Selection The s

Embro is a German manufacturer of textile-based heating elements and pads. The elements are highly flexible, lightweight, and they are ideal for all kinds of mobile heating solutions such as: > car seat heaters > steering wheel heaters > heating elements for garments (jackets, gloves, ...) Furthermore, our elements are often used in infrared heating panels, too. Do not hesitate to contact us for further information.

Prefabricated or single elements; resilient and smooth-running made of inherently stable aluminium or steel profile Individual elements —roller element, various Various versions —sliding rails, installation at two heights —Sliding ramp, smooth transition between different heights Different heights Ball element, low-wear and low-friction ball roller for flexible movement —Brush element, elastic brush fibres for gliding —reverse element, prevents backward movement —brake, gentle braking and starting speed —distance piece, as distance piece for staggered arrangement Accessories for roller rails —Holder, various for 4-sided and round profile —end plate, closure of the end face —guide rail, guiding/positioning Further accessories —stop buffer, damping of the stop —Roller holder, mounting on profile —Sensor holder, variable mounting of limit switches —backstop, prevention of tool carrier retraction Partially esd-capable and also available as individual parts

FLEXIBILITY FOR THE METAL PROCESSING INDUSTRY The demands on your production are continually increasing. As a solution provider, we therefore focus entirely on your needs. Continually providing increased efficiency, reliability and quality: we know what today’s metal processing industry requires from you – with our new, flexible ELEMENT platform we are already setting the course for a successful future today. Apart from the high level of productivity and precision you have come to expect from us, this solution offers customised configuration options and updates, enabling you to respond to future requirements. This gives you a real competitive edge – helping you to stay ahead in the long run.

Our ventilation systems ensure that an optimum air exchange is achieved within technical buildings (e.g. for cooling transformer and low voltage rooms) and prevent penetration by snow, rain and insects. Individual elements can be flexibly adapted to suit building conditions and are suitable for integration in both doors and walls. Designs: Standard surface: anodised aluminium E6 EV 1 silver Production in recommended sizes or to suit building conditions With a horizontal perforated sheet (for LLE) With integrated swirl chamber for use in conditions involving driving snow and high wind speeds (for LSU/LSO) Aerating coupling for continuous venting Ventilation domes Miniature ventilators Slide ventilators Options: Anodised, painted or powder-coated surface – choice of colours Slide plate for manual air flow control Ventilator units for forced ventilation and aeration All-round swirl frame Special version for Type LLE: break-in inhibiting WK3 conforming to DIN ENV 1627 Our DRO and...

The 3G glass thread apapter is used as a connecting element between the laboratory glass cylinder with GL thread and the connection for flexible tube. The connector features a rotating nut with GL thread on the one hand and a G male thread or connecting elements on the other hand. Various connection elements, flexible tubes and pipes can be fitted in this way.