Flat-pitched roofs - Import export

Railing system secured by superimposed load for installation on private or public flat roofs with a pitch of up to 3°. System with a patented adjustable foot that permits exact 3D positioning of the posts when applied to roofs with varying pitches.

This cross-shaped anchor for flat roofs is weighed down using concrete slabs (50 x 50 x 5cm, not included). The design is based on a high-quality stainless steel frame (150 x 150 cm) with aluminium crossbars and a central, stainless steel anchorage point for one individual (Ø 16 mm). EN 795:2012, E For flat roof pitches ≤ 5° Weighed down using 8 concrete slabs (ca. 224 kg) Weight incl. ballast: ca. 245 kg; resulting roof load approx. 108.9 kg per m² Also designed for usage as an intermediate post in a lifeline system Incl. 5 EPDM patches to protect your roof membrane

These lifeline systems have been awarded national technical approval and are available in 2 cable thicknesses (6 and 8 mm). They can be used to provide simultaneous fall protection for up to 4 individuals. These stainless steel anchorage systems can be installed on a flat or pitched roof or along a facade to secure your access routes - and there are virtually no limits as to how far you can extend them. National technical approval ("abZ"): Z-14.9-786 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, C & CEN/TS 16415:2013 Designed for use in combination with virtually any ABS Safety post Suitable for installation on most common roof types 6 or 8 mm stainless steel cable (V4A) Simultaneous protection for up to 4 individuals

This temporary guard rail system was specially designed for pitched and flat roofs and is simply hooked onto the gutter or parapet. Any force exerted on it is distributed through its special facade supports. This lightweight guard rail, which is made of high-quality aluminium material, weighs less than 10 kg per meter. EN 13374:2013, C Designed for temporary usage Also suitable for overhanging roofs ≤ 1 m Lightweight and easy to transport Can be easily adapted to fit your architecture

This temporary guard rail, which is made of high-quality aluminium, is simply flipped open and erected. On a flat roof surface (pitch of up to 10°), the posts of this guard rail system are weighed down using special weights - each weighing 25 kg. The compact design of the system when folded up makes it really easy to transport. EN 13374:2013, A Handrail height: 1100 mm Designed for temporary usage Extremely simple installation Easy to transport Can be easily adapted to fit your architecture

Secure your domed rooflights using this 1100 mm-high guard rail made of aluminium and stainless steel. It protects your workers from falling off the roof or putting a foot through the rooflight. This guard rail system is suitable for flat roofs with a pitch of up to max. 10°. It can be installed on bitumen or fabric-reinforced plastic sheeting to provide a completely penetration-free solution. EN 13374:2013, A Designed for flat roof pitches ≤ 10° Suitable for domed rooflights: Max. 2.5 m x 2.5 m Handrail height: 1100 mm Weight per post: Approx. 3 kg (traditional posts 30 kg) Set includes bitumen patches PVC patches need to provided and cut to size onsite

Install this stainless steel anchorage point (Ø 16 mm) - specially-designed for flat roofs (max. 10° pitch) - on bitumen or fabric-reinforced plastic sheeting without penetrating your roof surface - and without the need for extra weights. The crossbars, which are made of high-quality, lightweight aluminium, ensure that the force is reliably distributed whilst keeping the weight down. Meets the requirements of EN 795:2012, A + CEN/TS 16415:2013 Designed for flat roofs with a pitch of up to 10° Min. 15 m² roof space required Fused to a bitumen/fabric-reinforced plastic membrane Penetration-free installation - no extra weights required

This anchorage device was specially-designed for flat roofs. It can be used as an anchor or system support and can be weighed down using concrete slabs (50 x 50 x 5 cm, not included) or gravel (not included). Its high-quality, stainless steel frame (150 x 150 cm) with aluminium crossbars is equipped with a central anchorage point (Ø 16 mm) - also made of stainless steel. EN 795:2012, E + CEN/TS 16415:2013 For flat roof pitches ≤ 5° Weighed down using 16 concrete slabs (ca. 448 kg) Weight incl. ballast: 483 kg | resulting roof load: approx. 214.7 kg per m² Anchorage point for 2 individuals Weighed down using gravel (ca. 450 kg) Weight incl. ballast: ca. 485 kg | resulting roof load: approx. 200 kg per m² Anchorage point for 1 individual (secures 2 individuals when used as an intermediate bracket in a lifeline system) Additional supporting tube required for usage as an end or corner post Incl. 5 EPDM patches to protect your roof membrane

Use one of these mobile kernmantle cable systems to temporarily install a horizontal lifeline system on a pitched or flat roof. This lanyard is equipped with freely-moving carabiner hooks and is available in 3 lengths: 15 m (1 hook), 23 m (2 hooks) and 30 m (3 hooks). EN 795:2012 & CEN/TS 16415:2017 EN 353-2:2002 & EN 358:2000 Sharp edge-tested kernmantle cable (Ø 12 mm) acc. RFU CNB/P/11.075 Incl. energy absorber and adjustable rope shortener Secures up to 4 individuals Incl. spliced carabiner hooks which move freely along the cable (15 m = 1 hook, 23 m = 2 hooks, 30 m = 3 hooks)

This guard rail - made of aluminium and stainless steel - is kind to your roof as it is simply weighed down using special weights without penetrating your roof surface. This collective protection mechanism, which is 1100 mm high, can be used to secure a domed rooflight up to 2.5 m x 2.5 m on a flat roof with a maximum pitch of 10°. EN 13374:2013, A Penetration-free installation Designed for flat roofs with a pitch of up to 10° Suitable for domed rooflights: 2.5 m x 2.5 m Handrail height: 1100 mm Weighed down using special UV-resistant plastic weights Weights: 760 x 800 mm (2 x 25 kg) Incl. special fleece material to protect the surface

Use this guard rail system to secure the edge of your roof, a domed rooflight or other fall danger zone on a flat roof surface (pitch of up to 10°). The handrail is 1100 mm high and made of high-quality aluminium and stainless steel material. Installation is done using a set of plastic or concrete weights - without penetrating your roof surface. EN 13374:2013, A Suitable for roof pitches of up to 10° Distance between the posts: Max. 2.50 m Plastic weights 760 x 800 mm (2 x 25 kg); Weight of the system per m: 30.68 kg Concrete weights 790 x 280 mm (2 x 29 kg) Incl. special fleece material for surface protection

Simply install this high-quality guard rail, which is made of aluminium and stainless steel, on a bitumen or fabric-reinforced plastic membrane - completely penetration-free. The guard rail is 1100 mm high (handrail) and is suitable for roof pitches of up to 10°. EN 13374:2013, A Designed for flat roofs with a pitch of maximum 10° Handrail height: 1100 mm Distance between the posts: Max. 2.50 m Weight per post: Approx. 3 kg (traditional posts: 30 kg) Bitumen patches are included in the package PVC patches need to be provided and cut to size onsite