Flat steel - Import export

These are the dowel used in filtration system.

The force to be measured must be introduced axially and perpendicularly to the entire surface of the inner and outer bands of the sensor in the opposite direction. Conversion of the acting force into an electrical output signal is performed by strain gages connected together in a full bridge circuit. To achieve optimal accuracy, the base of the sensor should rest on a smooth level surface, hardened to at least ≥ 58 HRC with sufficient dimensions. The base cover welded to the surface has a stabilizing effect on the sensor element. Lateral forces must be avoided anyway as they distort the measured results. Tension and bending relief for the sensor cable is to be carried out on the machine side. FEATURES: — Measuring ranges from 0 ... 100 N to 0 ... 200 kN — Centric throughout hole — Flat disc design — Made of stainless steel — Completely welded sensor body — Nominal characteristic value standardization possible — burster TEDS optionally available

stainless steel*flat form

The systems offer better resistance to chemicals than normal steel galvanised flat pot magnets. The systems offer higher temperature resistance to chemicals than normal steel galvanised flat pot magnets.

The systems offer better resistance to chemicals than normal steel galvanised flat pot magnets. The systems offer higher temperature resistance to chemicals than normal steel galvanised flat pot magnets.

The systems offer better resistance to chemicals than normal steel galvanised flat pot magnets. The systems offer higher temperature resistance to chemicals than normal steel galvanised flat pot magnets.

▪ With plastic pipe saddle RUK (short) and u-profile ▪ To be used as fixed point clamps only ▪ Covering all standard metric and imperial diameters between 48,3 mm and 521 mm / 1.90 inch and 20.51 inch

Due to the low weight (30 kg/m²), the NeoR can be moved easily by hand – ideal for construction sites, even without a crane. - Universal fields of application: Foundations, columns, beams, walls - Height offset of the panels can be performed via oblong holes in the panel frame - Well-balanced range of panels - Keybolts as lightweight, friction-locked and cost-effective connecting pieces - Easy attachment of accessories using the hook head principle - The structural height is just 7.5 cm → low storage and transport volume - The flat steel frame guarantees robustness and durability - Fresh concrete pressure capacity of 50 kN/m² - Compatible with all PASCHAL systems Technical Data Panel widths: 90/75/60/45/30/15 cm Panel heights: 150/90 cm Large-size panel: 180 x 300 cm Frame depth: 7,5 cm Plywood: 12 mm birch plywood Max. concrete pressure: 50 kN/m² according DIN 18218 Tolerances of deflection: According DIN 18202, table 3, line 6

COFFEE SPRINTER – The single cup coffee brewer, pour over for fresh coffee. The single-cup coffee brewer is the perfect solution for ultimate freshness. Place the COFFEE SPRINTER on your mug and introduce 2 tablespoons of ground coffee into the filter. The water distributor is inserted to press the ground coffee flat to the stainless-steel mesh at the bottom. Add some hot, not boiling water (appr. 50 ml ) and wait for 20 seconds to allow the ground coffe to swell up. Fill with hot water and pülace the lid on top (caution: observe cup/mug capacity). Hot water passes the ground coffee and fills the mug below. As soon as the water goes through the filter, remove the lid, turn it upside down, then place the filter on the lid which is now serving as a drip-off tray. Enjoy great coffee! Highlights fits most cups and mugs, from 7,1cm to 8,6cm micro-fine stainless-steel mesh water distributor for consistent extraction of the ground coffee lid serves as drip-off...

This extremely flat stainless steel anchor does not get in the way when stacking containers. Combine 2 ABS-Lock X-Flat devices to create a temporary lifeline system. The anchor is riveted onto the subsurface from above using 14 watertight blind rivets. The integrated sealant tape prevents water from seeping in. EN 795:2012, A + CEN/TS 16415:2017 Specially designed for sandwich and trapezoidal sheeting (positive/negative) For steel plating ≥ 0.5 mm Distance between the rows of pre-drilled holes: 180-250mm / 280-333 mm Installation materials included

Flat tool steel in deffent alloys, standard sizes from stock

Head for formwork prop: can be fitted on top of formwork props to hold the wood formwork support for which 4 corner angles are welded Tripod stand: the formwork prop can be fixed simply by a bracket that is supported movably on the tripod stand Formwork clamp: large size for stepless fixing by wedge. Eccentric clamp: for tensioning wire from 5 mm - 10 mm, load up to 2.500 kg Formwork clamp: made of 8 mm thick bent flat-bar steel. Wing nut WOF 27, casting, preferred use for grid-pattern formwork etc.

The innovative SANHA installation system NiroTherm® combines high-quality NiroTherm® press fittings with a black sealing ring made from EPDM (=ethylene propylene diem rubber) and NiroTherm® stainless steel system tubes. The system is produced from the material 1.4301 (AISI 304). Due to the well-known corrosion resistance of stainless steel, NiroTherm® offers installers therefore a real alternative compared to conventional steels when it comes to closed systems in humid atmospheres such as screed. Since it needs considerably less isolation against humidity*, the installation is faster and labour costs accordingly lower. In addition to the system description, NiroTherm® system press fittings are marked on the outside with a red dot. * This does not affect thermal insulation necessitated by national energy efficiency laws. NiroTherm® system pipe, material no. 1.4301, reduced wall thickness, in 6 m lengths, for cooling, compressed air, heating and industrial applications

The FLEXON maxxTop product range offers both stainless steel and plastic flat top chains. The range also includes conveyor chains made of cast iron and plastic, as well as straight running and sideflexing plate top conveyor chains. FLEXON stainless steel and plastic flat top chains are available as straight running or sideflexing versions, in a variety of materials, widths and plate thicknesses. Featuring low friction values, high resistance to wear, good noise damping, high-quality workmanship and surface finishes, they are widely used in the beverage industry and beyond. iwis Stainless steel flat top chains made of hardened material, which offers excellent tensile strength, corrosion and abrasion resistance. Highlights: - Increased wear resistance - Corrosion-proof - Better wear and corrosion properties when compared to carbon steel equivalent - Available in most standard sizes

The innovative SANHA installation system NiroTherm® combines high-quality NiroTherm® press fittings with a black sealing ring made from EPDM (=ethylene propylene diem rubber) and NiroTherm® stainless steel system tubes. The system is produced from the material 1.4301 (AISI 304). Due to the well-known corrosion resistance of stainless steel, NiroTherm® offers installers therefore a real alternative compared to conventional steels when it comes to closed systems in humid atmospheres such as screed. Since it needs considerably less isolation against humidity*, the installation is faster and labour costs accordingly lower. In addition to the system description, NiroTherm® system press fittings are marked on the outside with a red dot. * This does not affect thermal insulation necessitated by national energy efficiency laws. NiroTherm® system pipe, material no. 1.4301, reduced wall thickness, in 6 m lengths, for cooling, compressed air, heating and industrial applications

The innovative SANHA installation system NiroTherm® combines high-quality NiroTherm® press fittings with a black sealing ring made from EPDM (=ethylene propylene diem rubber) and NiroTherm® stainless steel system tubes. The system is produced from the material 1.4301 (AISI 304). Due to the well-known corrosion resistance of stainless steel, NiroTherm® offers installers therefore a real alternative compared to conventional steels when it comes to closed systems in humid atmospheres such as screed. Since it needs considerably less isolation against humidity*, the installation is faster and labour costs accordingly lower. In addition to the system description, NiroTherm® system press fittings are marked on the outside with a red dot. * This does not affect thermal insulation necessitated by national energy efficiency laws. NiroTherm® system pipe, material no. 1.4301, reduced wall thickness, in 6 m lengths, for cooling, compressed air, heating and industrial applications

The innovative SANHA installation system NiroTherm® combines high-quality NiroTherm® press fittings with a black sealing ring made from EPDM (=ethylene propylene diem rubber) and NiroTherm® stainless steel system tubes. The system is produced from the material 1.4301 (AISI 304). Due to the well-known corrosion resistance of stainless steel, NiroTherm® offers installers therefore a real alternative compared to conventional steels when it comes to closed systems in humid atmospheres such as screed. Since it needs considerably less isolation against humidity*, the installation is faster and labour costs accordingly lower. In addition to the system description, NiroTherm® system press fittings are marked on the outside with a red dot. * This does not affect thermal insulation necessitated by national energy efficiency laws. NiroTherm® system pipe, material no. 1.4301, reduced wall thickness, in 6 m lengths, for cooling, compressed air, heating and industrial applications

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies.

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

The Hammer Mill, series PHMS is used for the economical preparation of wood chips from round wood, residual wood, waste wood or annual plants. The wood chips are of high quality and can be directly injected for combustion, or used as flakes for briquetting and pelletizing. Due to their quality they are also used for the production of core layer and surface layer material during the production of wood-based panels. Characteristics, Function Material is fed vertically from above The gravity sifter "Cleanomat" separates heavy contaminants from the feed material Flat steel hammers rotating at high speed split the feed material into flakes Stationary impact elements support the size reduction process and relieve the screens The perforation of the screens determines the size of the flakes The symmetrically designed machine housing allows operation of the mill in both directions Rotating flat steel hammers can swing back when large foreign objects penetrate into the grinding...

The Hammer Mill, series PHMS is used for the economical preparation of wood chips from round wood, residual wood, waste wood or annual plants. The wood chips are of high quality and can be directly injected for combustion, or used as flakes for briquetting and pelletizing. Due to their quality they are also used for the production of core layer and surface layer material during the production of wood-based panels. Characteristics, Function Material is fed vertically from above The gravity sifter "Cleanomat" separates heavy contaminants from the feed material Flat steel hammers rotating at high speed split the feed material into flakes Stationary impact elements support the size reduction process and relieve the screens The perforation of the screens determines the size of the flakes The symmetrically designed machine housing allows operation of the mill in both directions Rotating flat steel hammers can swing back when large foreign objects penetrate into the grinding...

The Hammer Mill, series PHMS is used for the economical preparation of wood chips from round wood, residual wood, waste wood or annual plants. The wood chips are of high quality and can be directly injected for combustion, or used as flakes for briquetting and pelletizing. Due to their quality they are also used for the production of core layer and surface layer material during the production of wood-based panels. Characteristics, Function Material is fed vertically from above The gravity sifter "Cleanomat" separates heavy contaminants from the feed material Flat steel hammers rotating at high speed split the feed material into flakes Stationary impact elements support the size reduction process and relieve the screens The perforation of the screens determines the size of the flakes The symmetrically designed machine housing allows operation of the mill in both directions Rotating flat steel hammers can swing back when large foreign objects penetrate into the grinding...

PERMABLOC shims are available in assortment cases with various configurations or can be (re)ordered in individual sizes. Lightweight assortment cases (IP67) Various case configurations available Five machine foot sizes, nine thicknesses Corrosionresistant highquality stainless steel Perfectly flat for stable, consistent machine support Perforated tab for easier positioning and removal The fully equipped PERMABLOC cases are practical to transport and offer safe storage and clear arrangement of all available shims. It is so handy, with the right shim size and thickness always at your fingertips! Precut shims not only reduce labor costs during installation and repair, but also facilitate inventory control and avoid the risk of injury when cutting and inserting sharpedged shims. The PERMABLOC assortment cases are available in six different configurations. Download the Technical Data Sheet for assortment details.

Attention:Delivery is made by forwarding . Freight costs as incurred. This flat rack out of stainless steel has adjustable feet and a damping. The wage and device plate (54,0 cm x 54,0 cm) will be inserted in the rack and put on your laboratory table. The effect is that your laboratory table will be upgradet to a wage table. Article number for wage and device plate : L58745001 Geben Sie Text oder eine Website-Adresse ein oder lassen Sie ein Dokument übersetzen. Abbrechen Verwendungsbeispiel für "": Automatisch von Google übersetzt

Stainless steel, flat, grades availabe on request, hot-rolled. Technical delivery conditions according to DIN EN 10088-3:2014. Execution as per DIN EN 10058. The produced bars are delivered with mill test certificates according to DIN EN 10204/3.1. Available in random lengths of 4000-6500 mm. *The regular minimum order quantity is 500 kg. The finished bars are packed in bundles of approx. 500 kg. Each bundle carries two labels, providing information about dimensions, grade, heat number, weight, manufacturer's code and works inspector. Other dimensions on request. Application areas: • Mechanical engineering • Power plants • Chemical industry • Petrochemical industry • Food industry / agricultural technology • Aerospace • Ship building • Medicine and pharmaceutical • Decorative purposes / kitchen equipment • Construction industry Special features: • Non-magnetic materials • Materials for low temperatures