Flash - Import export

Bearing Assembly

For loosening and restoring the usability of rusted threads such as screws, turnbuckles, spindles and stud bolts For removing rust from metal surfaces For removing flash rust and rust stains For cleaning metallic encrustation and oil residues Advantages and benefits Chemical reaction – actively breaks down or dissolves rust layer Environmentally friendly formula – ecologically harmless in use Does not contain petrol or mineral oil – workplace-friendly Low evaporation rate – enhanced effect through longer exposure time

Alarm messages can be signalled optically and acoustically at the pumping station or transmitted remotely by mobile phone or phone line. Optical and acoustic alarm in 12 V DC technology for connection to the alarm unit AG 230/12. Product features Multi-tone series combined with xenon flash 32 different tones can be set Volume adjustable up to 105 dB Optical and acoustic signals can be triggered separately

Checking is better: with our compact measuring unit, you can detect the wrong brush pressure and correct it immediately. The wrong brush pressure is often the cause of serious problems in motors and generators. This includes brush wear that is too high or irregular, sparking, high commutator or slip ring wear, or carbon-brush breakage. Compact, light, and easy to handle: with our brush-pressure unit, you can measure the carbon-brush pressure precisely and in a matter of seconds. The large display provides an immediate reading from 0.1 to 50 N.

• Face shield to protect against class 2 arcing faults (7 kA / 423kJ/m²) • Tested in accordance with DIN EN166, as well as the GS-ET-29 test principle and is VDE-approved • The visor is manufactured from 2,0mm-thick Polycarbonate • It has excellent optical qualities, and its light transmittance VLT (D65) according to ISO 10527:2007 i ≥75% • For better protection of the ears, the visor is extended toward the back • The visor can be folded up and can be locked in place in any position by means of a screw connection • For protection against heat entering through the bottom edge of the shield, the visor has a chin protection with a Nomex bib

• Face shield to protect against class 2 arcing faults (7 kA / 423kJ/m²) • Tested in accordance with DIN EN166, as well as the GS-ET-29 test principle and is VDE-approved • The visor is manufactured from 2,0mm-thick green Polycarbonate • It has excellent optical qualities, and its light transmittance VLT (D65) according to ISO 10527:2007 i ≥75% • For better protection of the ears, the visor is extended toward the back • The visor can be folded up and can be locked in place in any position by means of a screw connection • For protection against heat entering through the bottom edge of the shield, the visor has a chin protection with a Nomex bib

Thanks to latest digital technoloy, we can meet your demands at a high professional level. We provide 2D/3D measurement (e.g. dimension measurements, burr measurements, grain size analysis, residual contamination analysis according to ISO 16232 & VDA 19, profile measurements, particle analysis, 3D presentation) with multi-lightning view for various illumination angles, optical shadow effects to clearly identify smallest univenness, reflexion reduction and HDR-view for high colour graduation. Several types of perspectives are possible thanks to a pivoted angle of sight (up to 90°) or by adjusting the mobile object lense (e.g. hollow spaces). We compile a detailed documentation including pictures or videos, where even real-time swivellling views can be recorded. We are looking forward to receiving your enquiry!

• Face shield to protect against class 1 arcing faults (4 kA / 135 kJ/m²) • Tested in accordance with DIN EN166, as well as the GS-ET-29 test principle and is VDE-approved • The electrician´s face shield is made entirely of plastic • The flexible plastic profile fits on many helmets • The visor is manufactured from 1,5mm-thick Polycarbonate • It has excellent optical qualities, and its light transmittance VLT (D65) according to ISO 10527:2007 i ≥75% • The visor can be folded up and can be locked in place in any position by means of a screw connection • The electrician´s face shield is attached in a non-slip manner by means of a wide, adjustable elastic band

You would like to get to know the performance options of the µMIC.200? Our starter kit facilitates a quick start into programming the control unit µMIC.200. Just unpack, get connected and start programming with Node-RED or in C/C++.Control unit µMIC.200 Mains adapter Digital CANopen I/O module Connecting cable Quickstart

Our effect coatings help produce innovative and high-quality products. Intense salty or effervescent and sour taste experiences or pearlescent effects on the surface of pan-coated products – our effect coatings allow for the creation of extraordinary and exciting new coated products.

Optical features Indicator type flashing Electrical features Operating Voltage 24 V DC Current 38-56 mA Voltage tolerance 10 % Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Lens typ round Lens size 10 mm Bezel typ Prominent bezel Screw thread size M14 Bezel material Metal Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 2 IP Code IP67 Max. panel thickness 11 mm Thermal features Operating temperature -20...+60 °C Storage temperature -25...+80 °C Norms & Standards UL listed Yes

Optical features Indicator type flashing Electrical features Operating Voltage 24V DC Current 38 - 56 mA Voltage tolerance 10 % Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Lens typ round Lens size 5 mm Bezel typ Prominent bezel Screw thread size M8 Bezel material Metal Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 2 IP Code IP67 Max. panel thickness 5,5 mm Thermal features Operating temperature -20...+60 °C Storage temperature -25...+80 °C Norms & Standards UL listed Yes

Partial or complete evaporation of the volatile portions of paints before the film formation is completed and/or before a further coating can be applied. In wet painting, the majority of the solvents are already released and exhausted during the coating procedure. In order to dry the freshly applied paint layer, it is necessary to also remove and exhaust the remaining solvents as far as possible. This takes place in special flash-off zones by means of exhaust air and conditioned supply air or fresh air. Flash-off zones are usually the link between paint application and drying. A certain degree of preliminary drying often also takes place here by working with a slightly raised room temperature. Some processes also require a gentle transition to higher temperatures in the dryer. All this can be realised in flash-off zones. On top of that, flash-off zones offer particular protection of the freshly painted surfaces against outside influences, especially dust.

Optical features Indicator type flashing Electrical features Operating Voltage 3.5-13 V DC DC current 38-56 mA Voltage tolerance 10 % Pin assignment Long pin = anode, short pin = cathode Mechanical features Lens typ round Lens size 10 mm Bezel typ Prominent bezel Screw thread size M14 Bezel material Metal Connector type Leads of LEDs Number of Connectors 2 IP Code IP40 Max. panel thickness 11 mm Thermal features Operating temperature -20...+60 °C Storage temperature -25...+80 °C

Optical features Indicator type flashing Electrical features Operating Voltage 3.5-13 V DC DC current 38-56 mA Pin assignment Long pin = anode, short pin = cathode Mechanical features Lens typ round Lens size 5 mm Bezel typ Prominent bezel Screw thread size M8 Bezel material Metal Connector type Leads of LEDs Number of Connectors 2 IP Code IP40 Max. panel thickness 5,5 mm Thermal features Operating temperature -20...+60 °C Storage temperature -25...+80 °C

Description Product range StarLED Electrical features Operating Voltage 24-28 V DC Voltage tolerance 10 % Mechanical features Number of LEDs 1 Lamp size T-3 1/4 Socket BA9s Diameter 10 mm Length 25 mm Thermal features Operating temperature -20...+60 °C Storage temperature -25...+80 °C

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

For your project, we can provide you with the required accessories to assist in constructing your building. Flashings for walls come as U-profiles, external and internal corners as well as drip-trays on request. For roofs, we can offer the following: wall-connection plates and barge, verge ridge and eaves flashings. These flashings can be offered in various sizes and lengths. Usually, the flashings are manufactured in galvanised steel in a coated paint finish. On request, we can manufacture these accessories in aluminium or stainless steel. The strength of material is also freely available to choose from, and can be finished in a range of RAL-colour tones.

Büttner's fash-tube dryers are most versatile and extremely ecient. The dryer systems are used for drying material having high levels of surface moisture or a specic surface area. They are, for example, used to pre-dry wood akes before they are conveyed into drum dryers. Flash tube dryers are also used as the principal dryers for drying bres to be used in MDF production. For many years Büttner's ash tube dryers have been in operation successfully in many dierent industrial sectors all over the world Features Water evaporation of up to more than 70 t/h per unit depending on the product Drying within just a few seconds, the material is then already mechanically separated and conveyed to the downstream drum dryer. Flash tube dryers may be heated in many dierent ways, for example: Flue gas from grate ring Büttner gas line burners Hot gas from gas turbines or gas motors Indirectly by heat exchangers for steam or thermal oil Any combination of the heating methods mentioned above

This unique protective suit, a combination of heat- and chemical suit will suit you to perfection. A detailed, richly protection for employees in critical situations. Certified according to EU-directive prEN 943 part 1/1997, and prEN 943 part 2/1996, according to EN 469 & EN 531 Extremely light: 6-7,5 kg Heat-resistant up to 250°C, temporary even for extreme temperatures, e.g. in case of deflagration Tear and kink restistant 3-layered structure of fabrics or needle felt of aramid fibres TWARON Chemical insulation layer and water vapour barrier of PTFE- film One-piece construction - easy donning For users of all height, individually adjustable Headgear compatible with every helmet 5- finger gloves and overhand gloves are replaceable Integrated overhand gloves with 3-way TWARON sole 3-way window pane with extremely large field of view Inside pocket for radio devices 2 overpressure valves Zipper with protective cover Every suit incl. test protocol Prices on request! Datenblatt

• LED Mini Ring Light for continuous- / switch operation or for flash operation • fast, load free switch input • 16 High Power LEDs for a very bright and homogeneous area of interest illumination • Smart, lightweight aluminium housing for a direct attachment to the lens • Protection class IP67 enables use in difficult environmental conditions • Integrated light controller enables constant lighting conditions which lead to reliable Machine Vision processes • Lens adapter with filter thread for a quick mounting • Polarization filters and fresnel lenses adapt the light direction according to the application • 300 mm cable with an M8 3-pin plug • Connection cable with M8 3-pin socket in different lengths available as additional equipment (limited drag chain compatibility)