Results for
ANTHERMO GMBH
Germany
Air heat exchangers as finned tube heat exchangers Heat transfer between a gaseous media and a liquid Finned tube heat exchangers are often called air/water heat exchangers or gas/water heat exchangers. Heat transfer between a gas (for ex. air) and a liquid (for ex. water) takes place in the air-/water heat exchangers. To improve the thermal output transfer from the gas to the liquid, fins made of well heat transferring materials are put on the tubes. Very often air-/water heat exchangers are used as exhaust heat exchanger to gain the energy out of warm or hot exhaust fumes. Finned tube heat exchangers can also be used as air heater, air cooler or condenser.
Request for a quoteANTHERMO GMBH
Germany
Customized air-water heat exchangers for industrial use Three types of air-water heat exchangers Three different designs o air-water heat exchangers The Anthermo GmbH delivers three different designs of air-water heat exchangers: Finned tube heat exchangers Lamella heat exchangers Straight tube heat exchangers These heat exchangers are designed in a way, that inside the tube water or another liquid circulates. The air flows around outside the tubes or the fins/lamellas. The connection between the fins and the tube is used to enlarge the space for heat transfer between the liquid and the gas fluid. The technical figures (for ex. amount of air, temperature, pressure, waste of air) can be different for the air-water heat exchanger. Also the operating conditions and the environment conditions can vary from application to application.
Request for a quoteANTHERMO GMBH
Germany
Finned tubes for efficient heat exchange Large exchange area in a small space By using finned tubes (also known as corrugated rib tubes), optimal heat exchange can be achieved in a small space. By applying so-called ribs to smooth tubes, the exchange area of the tubes is increased considerably. Finned tubes are usually used where an optimal temperature exchange between gaseous media and liquids is to be achieved. Different designs for every purpose In many cases, finned tubes are built into production machines as a component in machine and apparatus construction. Finned tubes can be designed for a variety of special application conditions. The length, the design and the ribbing can be individually adapted.
Request for a quoteANTHERMO GMBH
Germany
Tubes wound into a spiral shape Coaxial heat exchangers consist of two or more pipe coils, which are routed into one another and wound up in a spiral shape. The primary medium runs in countercurrent to the secondary medium. Fast temperature exchange This countercurrent design achieves a very rapid temperature transition with high efficiency between the liquids. Due to the spiral shape, the rapid temperature exchange between the liquids is achieved in a very small space. No cleaning or maintenance required Another advantage is the encapsulation of both liquids from environmental influences. There is practically no cleaning or maintenance effort due to pollution from the environment. The coaxial heat exchanger also does not require any seals that require maintenance. Condenser or evaporator function Coaxial heat exchangers can be used for both condenser and evaporator functions.
Request for a quoteANTHERMO GMBH
Germany
Temperature control of gaseous and liquid media Flat tube heat exchangers are generally used as air / air or air / liquid heat exchangers. Flat tube heat exchangers are used where the (exhaust) air is polluted and the installation space is limited. In heat recovery in particular, there are numerous applications for flat tube heat exchangers as so-called exhaust gas / exhaust air heat exchangers. Little installation space and less pressure loss While the rows of tubes in smooth tube heat exchangers consist of round tubes, the rows of tubes in flat tube heat exchangers have a special profile (see illustration). This special tube profile offers advantages over the round profile in certain applications. Flat tube heat exchangers require less installation space than smooth tube heat exchangers with the same exchange area and are therefore also lighter.
Request for a quoteANTHERMO GMBH
Germany
Air-water / air-air heat exchanger as smooth tube heat exchanger up to 1,000 ° C Smooth tube heat exchanger as an air / water heat exchanger In the case of air-water heat exchangers (also called gas-water heat exchangers), a temperature exchange takes place between a gas (usually air) and a liquid. As a rule, the liquid medium flows inside the pipes, while the gaseous medium flows around the pipes outside the pipes. Smooth tube heat exchangers can cover various areas of application: heating, cooling and condensing as well as heat recovery. Smooth tube heat exchanger as air-to-air heat exchanger Smooth tube heat exchangers are also often used as air-to-air heat exchangers. In this application, a gas (e.g. exhaust air or exhaust gases) flows inside the pipes and a gas (e.g. fresh air) outside the pipes around the pipes.
Request for a quoteANTHERMO GMBH
Germany
Customized air-air heat exchanger for the industry (up to 1.000°C) Hot outgoing air and cold incoming air Very often hot exhaust gas gets out in the environment without any use. On the other hand cold incoming air must be lead into the production process and shall be warmed. This occurs for example very often within drying technology. In this case air-air heat exchangers can be used very efficient in heat recovery. As result you have great potential to save energy expenses. Three types of air-air heat exchangers The Anthermo GmbH delivers three types of different air-air-heat exchangers: cross-flow heat exchanger straight-tube heat exchanger flat-tube heat exchanger The technical figures (for ex. amount of air, temperature, pressure, waste of air) can be different for the air-air heat exchanger. Also the operating conditions and the environment conditions can vary from application to application.
Request for a quoteFRIEDRICH SCHULTZE GMBH
Germany
Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. With these heaters the excess temperature touching the top of the fins does not exceed 67K (difference of 67°C to room temperature).
Request for a quoteFRIEDRICH SCHULTZE GMBH
Germany
Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. RiRo-F for rooms with fire risk: the economic choice for rooms where a “full range” heating is not needed, e.g. to protect your rooms or your valuable facilities against frost. To keep below the reduced surface temperature of 115°C we chose appropriate power layout. Max. 115°C on top of the fins.
Request for a quoteFRIEDRICH SCHULTZE GMBH
Germany
Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. With the built-in three step switch heating power can be adjusted according to actual requirements. This helps saving energy! Step I 1/3 of heating power Step II 2/3 of heating power Step III 3/3 of heating power
Request for a quoteKELVION HOLDING GMBH
Germany
This new addition to our product line is a compact heat exchanger made from high-alloyed stainless steel and can handle temperatures up to 550°C. Its compact and modular design makes it extremely versatile and easy to service. Our exhaust gas heat exchanger is designed to recover heat from exhaust gas produced for example by combustion engines used in combined heat and power plants. The heat exchanger transfers the heat from the exhaust gas to a liquid (water or water-glycol solutions). When heated up, this liquid can be used in central heating systems; for preheating air in the combustion chambers of furnaces and turbines; to dry coal, pulp, wood and other materials as well as for generating electricity with a Rankine process.
Request for a quoteKELVION HOLDING GMBH
Germany
If a commercial product does not meet the market demands, our Customized Air Cooler product line offers a design-to order process, with your application needs as the starting point. We optimize the total quotation process and tailor our manufacturing to fulfil your requirements. We start with the widest possible product portfolio, offered in our selection software. Our Sales teams can provide non-standard, design-to-order, industrial or OEM solutions. It is a critical feature of our quotation and manufacturing process that we check the design at the earliest opportunity to avoid risk.
Request for a quoteKELVION HOLDING GMBH
Germany
The wide range of product portfolio of coils with different tube diameters, tube patterns, fin profiles, materials and options allows us to customize our coils for any specific application and fluids: air heaters, air coolers, condensers and evaporators for HVAC and various industrial applications. Kelvion heat exchanger coils are manufactured with copper tubes and aluminum or copper fins. The fins are equipped with special profiles developed at our R&D department enhancing heat transfer and keeping pressure drop at a moderate level. The customized fin spacing is achieved by collars which also provide the contact between the fin block and the tubes. Mechanical expansion of the tubes guarantees a perfect bond between the fins and the tubes leading to maximum heat transfer between both fluids.
Request for a quoteKELVION HOLDING GMBH
Germany
The Kelvion range of Commercial Air Coolers is designed for most refrigeration applications. In addition to predefined variants, there is the flexibility to include options and accessories to meet our customers’ demands. Their capacity and size are optimized to facilitate the stocking and competitive transportation of products directly, or via our distribution and wholesale channels. Commercial products are defined within the sales brochures, selection software and product configurator – all with specific price lists.
Request for a quoteKELVION HOLDING GMBH
Germany
Different applications require different designs for an optimal fit, so we provide Shell & Tube heat exchangers in single tube design with plain, low and high fin tubes and also with compact fin bundles. The plain tube design is most suitable if media have similar heat transfer properties, where the compact fin design means the best possible performance if there is a substantial difference in heat transfer rate, for example when exchanging heat between oil and water. The low and high fin single tube solution is between the previous two designs in order to further optimize on flow, pressure drop and velocities of media.
Request for a quoteKELVION HOLDING GMBH
Germany
Double tube safety heat exchangers play an important role in applications where preventing media mixing in the event of a leak is paramount. They are widely used and accepted as standard in the chemical industry, power, heavy and light industry, oil & gas, marine, transportation, refrigeration and food & beverage sectors. Kelvion has a long track record in developing ground-breaking technologies always aiming to reach the highest levels of safety, environmental protection and cost-efficient operation. Our expert engineers are fully trained to provide you with the best-in-class solutions tailored to your specific requirements. As industries face ever stricter regulations for safeguarding requirements of environment and water supply, double tube safety heat exchangers are the technology of choice.
Request for a quoteOGE GROUP
Germany
Finned or bare tube coils for air - gas heating or cooling (heavy duty) Shell and Tube Heat Exchangers | Air Coolers, Air Heaters, Pressure Vessels | Gas cooling in pneumatic conveying systems | Air cooling in industrial refrigeration | Air drying in textile machines | Air heating & cooling in HVAC systems | Coolers for A.C and D.C motors | Coolers for power transformers | Diesel and gas engines water cooling | Air preheaters for boiler plants | Economizers for steam, oil and hot water generation | Hydrocarbon condenser | Industrial process water cooling | Inter and after coolers | Oil cooling in lubrication system | Solvent recovery by condensation | Steam condenser
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Fin-tube heat exchanger - Import exportNumber of results
17 ProductsCompany type