Fibre cement - Import export

In any way, shape or form – our diverse selection of tiles offers the right tile for every taste. You only have to choose the desired size and tile type. Our stock of test tiles also includes stoneware and porcelain stoneware for adhesive testing, for instance pursuant to EN 1324 or EN 12004. You are free to specify the dimensions of our fiber cement test specimens.

Dimensions Width 3.00m Length 7.00m Height 2.61m Square meters 21.00m² This offer includes 1x room, 1x toilet with sink, 1x kitchen, 3x windows, 1x entrance door Prefab container with 80 mm roof and 100 mm wall insulation. Exterior cladding made of concrete (fiber cement panels) Including electrical preinstallation (fuse box, 3 sockets 230V, 2x LED ceiling lights, switch, cable ducts, cables). We can make other sizes and colors according to your specifications at short notice. In addition, you can order the following Roller shutters (incl. Einabu) 390 € Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €75 Urinal (incl. installation & sealing) 400 € Desired color only frame painting (incl. processing) 750 € The prices does not include VAT.

highly resistant to mechanical wear and tear proven impact resistance

the high material density provides for outstanding suitability as sound protection barriers

the single layer panel provides for high screw extraction forces excellent bond with the dispensed concrete good environmental conditions walls are ready for painting, wallpapering and nailing

excellent foot fall attenuation high walking comfort highly suitable for double floor systems diverse options for surface treatment and coatings

cost effective construction methods excellent fire protection convenient processing options

cost effective construction methods resistant to animal waste and chemical cleaning agents

provides fire protection when used as upper and lower ceiling panel Sound protection

statically effective paneling highly resistant to mechanical wear and tear high sound attenuation rot resistant, weather and icing proof

high resistance to moisture can be treated with ceramic materials

weconomical facade construction permanent weather protection Diverse color design options with commonly used color coatings high airborne sound attenuation

The Amroc-Panel stands up to the highest expectations when used as drywall, and features superior walking comfort, compressive strength and acoustic insulating characteristics. The "one man" panel in a 1,250 x 625mm size has proven its use. It has a sanded surfaces on both sides, and features a tongue and groove edge profile on all sides. The panel can be used in floating installations, requiring the panels to be glue-bonded at the profiled edges at all times. A felt substrate layer (or similar) is used as a footfall sound insulator and increases walking comfort. Furthermore, a vapor diffusion barrier must be installed under the floorboard. As an additional installation option, the panels can be mounted to floor beams for modernization work on old structures. For this application, the panels are also bonded to each other with glue and are additionally mounted to the sub-structure with screws.

Demand for panels with superior visual appeal for interior and trade show construction has increased steadily in recent years. For these applications, we provide a factory perforated panel in four different standard versions. Products can be selected from 32 x 32 mm patterns with 8 or 10 mm holes and 16 x 16 mm patterns with 6 or 8 mm holes. The product can be shipped in grey simulated concrete (unsanded), or as a ground and imbued panel in neutral, amber, brick red, or charcoal grey colors, and complies with the A2 fire protection code. Upon request, all products are available with a factory applied clear coat. We recommend Capadur wood flooring varnish from Caparol for on-site coating applications.

Amroc-Rustical is fully imbued and only comes in a sanded version. It is used for decorative interior construction, for instance for walls, ceilings and flooring. Amroc-Rustical is available in charcoal grey, amber, neutral or brick red. Amroc-Rustical has the same technical specifications as the Amroc-Panel. For wall and ceiling design applications on new construction, trade shows and exhibits, but also for remediation of existing construction, Amroc-Rustical offers an architecturally appealing, statically superior product with outstanding characteristics. This provides for a broad spectrum of applications. Amroc-Rustical is also an excellent choice as a permanently exposed floor surface. For this application, the panels should be treated with an impact resistant clear-coating. The rear-facing side should be coated in order to facilitate the vapor diffusion equilibrium.

The protective panel for your facade With AMROC-PROTECT, the thermal insulation of your facade is protected against wind and any kind of precipitation during the construction phase. Therefore, you can take as much time as you want to install your facade - without damaging your thermal insulation or the substructure. The high weathering resistance of the panel means that this protection can be permanently guaranteed. This distinguishes AMROC-PROTECT from all gypsumbased solutions. Due to the small panel thickness of only 8 mm, quick assembly and easy cutting to size are possible. Our formats are based on a grid of 1250 mm, but other formats are also possible. A further advantage is that our panel no longer needs to be dismantled, as it is completely rot-resistant and can remain behind the facade. Despite its high resistance, our product is ecological and free of chemical binders. So you'll be leaving a “green footprint” on your building with all our products!

AMROC Color-Primed is the product version used for customized finish painting at the construction site. The product AMROC Color-Primed is ideally suited for applying the finished paint coat to the facade at the construction site. The front facing side and edges are primed in RAL 9010 (white) and the rear facing side is finish coated in RAL 7035 (light grey). The finish coat that is applied at the construction site creates vapor diffusion equilibrium between the front and rear facing sides. The factory applied primer does not yet completely seal the front facing side. The finish coat must be a paint-manufacturer-approved paint that is weather proof and alkaline stable. We recommend Amphibolin ELF made by Caparol for this purpose. AMROC Color-Primed is also suitable for: Flooring for wet spaces to be surface treated with ceramic materials, or similar Walls in wet spaces that will be surface treated with ceramic materials.

Composition of the cement board Amroc-Panel (A2-s1,d0): approx. 75% wood chips (100% PEFC) approx. 23% special cement approx. 10% water content contained in the wood chips approx. 2% binder

The Amroc-Panel is the standard product, from which all other products are derived.

Thanks to its elongated aluminium base plate, this stainless steel anchorage device can be installed on a fibre cement roof (wave distance 177 mm), if the roof beams measure at least 60 x 120 mm. The device is attached to 2 beams. The base plate, which is 125 cm long when delivered, can be shortened onsite, if required. EN 795:2012, A + CEN/TS 16415:2013 Special wave design, e.g. for Eternit and similar roof systems Designed for load-bearing wooden structures Simply screwed onto two adjacent beams Min. beam dimensions: 60 x 120 mm

This stainless steel anchorage point is equipped with a wavy aluminium base plate which fits snugly to the waves of a fibre cement roof (wave distance 177 mm). The anchor device is simply screwed onto a wooden beam using the screws provided. EN 795:2012, A + CEN/TS 16415:2013 Special wave design, e.g. for Eternit and similar roof systems Developed for load-bearing wooden structures Simply screw it onto one single wooden beam Min. beam dimensions: 100 x 120 mm