Results for
IGUS® GMBH
Germany
iglidur® L250: For fast rotations Bearings for fast rotary motions like, for instance, in fans and small motors. iglidur® L250 is available as cylindrical bearings and plain bearings with flange. specially developed for fast rotating applications Very low coefficients of friction Excellent wear resistance
Request for a quoteASPINA GMBH
Germany
Shinano Kenshi is one of the world's leading OEM manufacturers of stepper motors, servo motors, brushless DC motors and custom motors.
Request for a quoteGRONBACH
Germany
We develop and manufacture blower components such as fans, motors, duct guides, electronics and housings and, if desired, integrate them into assemblies and devices. In addition, we develop entire blowers as well as the required equipment. Furthermore, we are your contact for fan optimisation with regard to improved volume flow, more efficient volume pressure and noise reduction.
Request for a quoteTROTEC GMBH
Germany
Wherever condensation free warmth is needed without long air transportation ways, on site and immidately effective, the favourable electric heating units of the TDS R series are best choice. Benefits in practise: Multistage temperature control with up to 3 heating stages Integrated room thermostat for constant, cosy warmth Overheat protection Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 20 R is suitable for uses in enclosed rooms Easy transportable and easy to use Possible fields of application: Automobile workshop Construction areas Assempby operation Gastronomy Storerooms and workshops Greenhouses and many more...
Request for a quoteTROTEC GMBH
Germany
Correct ventilation is not only an important prerequisite for a pleasant working environment, work protection provisions and regulatory directives make it mandatory in many areas.Proper room ventilation conducts harmful fumes and substances out of the room. The high pressure centrifugal fan TFV 100 is well-equipped for tasks such as transport of up to 4,000 m³/h air, even over longer distances and with back pressure.Owing to its extreme robustness, it is able to handle harsh working environments efficiently.The TFV 100 is available as standard model and additionally as a hire model. Benefits in practice: Extremely robust models with a high flow rate Splash proof type A (IP55) Deployment also possible in very dusty rooms Fan motor situated away from the main air flow Can be connected to suction as well as distribution ducts Stable characteristic curves and constantly high pressure
Request for a quoteTROTEC GMBH
Germany
ELECTRIC HEATER FAN TDS 20Black, white, hot! Ideal for many stationary heating tasks. This electric heater fan cuts a remarkably fine figure in the most varied of heating applications. And not by chance, but exclusively made by Trotec. In developing the TDS series, we paid particular attention to many practical details which make the great difference in contrast to conventional standard electric heater fans. In addition to common equipment features such as overheating protection or a fan motor provided with thermal protection, the electric heater fan TDS 20 comes with an extra air baffle which optimally leads the warm air flow outside and initiates maximum efficiency. Thanks to the integrated thermostat control, the produced warm air flow can be continuously adjusted exactly to the desired temperature.
Request for a quoteTROTEC GMBH
Germany
Stainless steel desiccant dehumidifier TTR 250 HP Special design for particularly long air transport distances ... The TTR 250 HP is not only standard-equipped with a radial fan but also with an additional extra-powerful fan motor which allows an especially high compression. This makes this dehumidifier especially well-suited for applications where air has to be transported over long distances or several levels, for example ships’ rooms, cellars or bunkers. The standard ex factory configuration of the TTR 250 HP is designed for the transportation of moist air. The dryer can be set by the customer to a different configuration, should the need arise for high-pressure dry air to be conducted away instead of moist. With the TTR 250 HP you can benefit from a professional desiccant dehumidifier originally produced by Trotec which has been developed and manufactured according to the highest of quality standards in Germany.
Request for a quoteTROTEC GMBH
Germany
The possibility for wall mounting or installation under the ceiling open wide range of application possibilities, e.g. for heating of building container, marketplaces, greenhouses, small storages, garages, workshops, boathouses or at installation applications. Benefits in pratice: 100% TROTEC - development, design, production Multistage temperature control with up to 3 heating stages Integrated room thermostat for constant, cosy warmth Overheat protection 10% more power than competitive models Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 30 is suitable for uses in enclosed rooms Standard built-in air baffle for optimization of heat dissipation (guarantees maximum efficiency) Fan function
Request for a quoteTROTEC GMBH
Germany
TDS 100 Electric Fan Heater The TDS 100 electric heater provides a heating performance between 11 kW and 22 kW in 3 stages (stage 1 only fan). Furthermore the TDS 100 has an integrated thermostat for continously adjusting of the desired temperature. Benefits in pratice: 100% TROTEC - development, design, production Multistage temperature control Integrated room thermostat for constant, cosy warmth Overheat protection Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 100 is suitable for uses in enclosed rooms Wall and ceiling bracket available - mounting is available as an accessory Fan function Place-saving stackable Fields of application: Building container Garages Gastronomy Greenhouses Marketplaces Storerooms and workshops Boathouses Workshops Shipbuilding and counting...
Request for a quoteTROTEC GMBH
Germany
Wherever condensation free warmth is needed without long air transportation ways, on site and immidately effective, the favourable electric heating units of the TDS R series are best choice. Because in comparision to direct fired gas or oil heaters dont consume oxygen and produce no combustion gases, they are well suited for temperature management of unheated inside rooms, workshops or garages. Thanks to the integrated thermostat control the produced warm air flow can be adjusted continuously to the desired temperature. If needed, the heating elements of the TDS 30 R switch on thermostatic controlled additional to the constant fan. Benefits in practise: Multistage temperature control with up to 3 heating stages Integrated room thermostat for constant, cosy warmth Overheat protection Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 30 R is suitable for uses in enclosed rooms Easy transportable and easy to use
Request for a quoteTROTEC GMBH
Germany
The TFV 100 Ex Radial Fan has an exceptional operating procedure. It incorporates axial suctioning and radial blowing out of air. This helps it to achieve excellent resistance to extremely contaminated air, which is saturated with dust. The fans are geared to deliver outstanding stability and efficiency in air circulation performances. TFV 100 Ex comes both as a standard and as a for-hire model. The radial fan is extremely tough in construction and promises high rates of air flow. It is immune to chemical/water splashes, in compliance with IP55-A guidelines. The radial fan works at optimal capacity, even in dust-saturated rooms. An important beneficial feature is that a considerable distance is maintained between the fan motor and the primary air flow. Benefits in practice: Extremely robust models with a high flow rate Splash proof type A (IP55) Deployment also possible in very dusty rooms
Request for a quoteTROTEC GMBH
Germany
TDS 50 Electric Fan Heater The TDS 50 electric heater provides a heating performance between 4.5 kW and 9 kW in 3 stages (stage 1 only fan). Furthermore the TDS 50 has an integrated thermostat for continously adjusting the desired temperature. In comparison to direct fired gas or oil heaters, the electric fan heaters of the TDS series dont consume oxygen or produce combustion gases. Because of that this devices can be used everywhere, in particular for temperature control of unheated interiors. Benefits in pratice: 100% TROTEC - development, design, production Multistage temperature control Integrated room thermostat for constant, cosy warmth Overheat protection Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 50 is suitable for uses in enclosed rooms Wall and ceiling bracket available - mounting is available as an accessory
Request for a quoteTROTEC GMBH
Germany
ELECTRIC HEATER FAN TDS 755-10-15 – solid three stage heating power up to 15 kW A true power pack, the electric heater fan TDS 75 cuts a remarkably fine figure even with large-volume heating tasks. And not by chance, but exclusively made by Trotec. And since our distinctive logo has been printed on the outside, we have also incorporated convincing extras inside, which make all the difference to conventional standard electric heater fans. In addition to common equipment features such as a fan motor provided with thermal protection or a reliable overheating protection, the electric heater fan TDS 75 comes equipped with further practice-oriented features, e.g. an integrated air baffle, which optimally leads the warm air flow outside and initiates maximum efficiency, or trapezoidally mounted carrying handles, on which the electric heater fan can be stably stacked a number of times.
Request for a quoteLLOYD DYNAMOWERKE GMBH
Germany
Application Motor drives fan for a climatic wind tunnel for automobile industry.
Request for a quoteLLOYD DYNAMOWERKE GMBH
Germany
Application Motor drives fan of climatic wind tunnel. In this wind tunnel trains up to 100m length can be tested.
Request for a quoteLLOYD DYNAMOWERKE GMBH
Germany
Our compact asynchronous motors are distinguished by high torques in combination with a small size. They are highly dynamic with a low inertial moment, with a proven design as well as electromagnetically compatible for optimal, compact performance levels. We develop our compact asynchronous motors specially as speed-controlled drivers and for a supply from frequency converters. They also consist of a flexible platform system and can be adapted to specific customer requirements. The housing is angular and jacketless. Being ventilated by a separately driven fan, the motors can constantly deliver the full torque over the entire speed range. The optimised control behaviour with converter operation means that these machines can replace DC machines.
Request for a quoteFLUKE DEUTSCHLAND GMBH
Germany
Safe, simple, precise The new VibScanner 2 Ex is a nextgeneration, explosion protection system for quickly detecting machine vibration in hazardous work environments. Measuring simultaneously on three axes, the VibScanner 2 Ex sets the benchmark for fast and accurate measurements of machine, gear, and bearing issues. This is the ultimate tool for fast and accurate machine vibration measurements. The VibScanner 2 Ex heightens efficiency and data quality. In just a quarter of the time of a standard datacollector, it precisely measures available data in three axes. Equipped with a triaxial sensor, it requires only one measurement point and the click of a button to begin collecting machine data. This device is ideal for routebased maintenance jobs in environments where explosion protection standards are required. Its rugged magnetic foot of the triaxial sensor fits perfectly on the housing of any motor, pump, fan, or other rotating device, detecting vibration right near the source.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
GLÄSNER SANDSTRAHL MASCHINENBAU GMBH
Germany
The filter housing is made of sturdy steel plate with a reinforcement of structural steel frame. Equipped with inlet and outlet openings for the dusty or filtered air. The inspection cap is used to control the automatic filter and has a flap for access to the built-in filter cartridges. These are made of folded polyester material having a filter area of each of 8 and 14 m². Provided with upper and lower reinforcing rings of plastics material for fastening in the holders. The dust drawer is equipped with wheels, allowing easy extraction during disposal of the dust. The centrifugal fan with a flanged electric motor and the fan / motor unit is built up in the filter housing - the motor is bolted with its flanges on the filter housing and surrounded by the sound enclosure.
Request for a quoteResults for
Fan motors - Import exportNumber of results
19 ProductsCountries
Company type
Category