Equipment design - Import export

Cost-efficient transport between floors The vehicle lift CARRICO is an interesting alternative to the TRAFFICO when lower lifting heights and less frequent use are needed. The CARRICO has been type-tested in accordance with the EU Machinery Directive 2006/42/EC. The conveying speed is limited to 0.15 m/s. Furthermore, this car lift is delivered with automatic sliding doors and cabin equipment designed for the transport of vehicles and passengers. Functions of the components Door type: automatic sliding door (depending on the cabin width - 4- or 6-leaf) Entrances: front only / through Control: Control unit with micro-processor with extensive control functions Drive: Submersible hydraulic unit incl. screw spindle pump Advantages Saves on construction space as no ramp required Especially suitable for narrow shafts Cost-effective way to transport cars Easy to operate, manual hinged doors

METAL SEPARATOR FOR THE PHARMACEUTICAL INDUSTRY FOR THE INSPECTION OF TABLETS AND CAPSULES. Detects and separates all metals encapsulated or as loose parts. Meets the highest h ygiene requirements. Fast decontamination of all product touching parts without tools. Fits every tablet press and deduster installation. High throughput owing to round equipment design DN50.

Blickle’s synthetic castors have a modern and clear design and feature high-quality surfaces. They are used in a wide range of applications, including medical equipment, transport systems, kitchen equipment and designer furniture. The smooth surfaces of synthetic castors make them easy to clean, allowing them to meet demanding cleanliness and hygiene requirements. .

The perfect format for maximum dry keepingThe industrial condenser dryer DH 310 which can also be supplied in a stainless steel housing is characterized by a high dehumidification capacity, reliable continuous operation properties and practice-oriented equipment options alike. Designed for the operation whilst positioned on the floor, the device – given on-site preparation – can also easily be used when mounted to the wall or ceiling. Also it can be connected to existing ducted air systems. The dehumidifier DH 310 comes with a smoothly running scroll compressor for constant, pulsation-free pressure to ensure an energy-efficient refrigeration. Combined with its self-regulating EC radial fan this robust industrial dryer allows for a constantly high dehumidification performance during continuous operation even at low temperatures.

BPL-055-D18V - battery hydraulic crimping tool, 55 kN, CU185mm²1 for exchangeable dies series "60-H", "5" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPL-062-D18V - battery hydraulic crimping tool, 62 kN, CU300mm² for exchangeable dies series "60-CK", "22" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPE-130-D18V - battery hydraulic crimping tool, 130 kN, CU300mm² for exchangeable dies series "130-C", "22" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPE-035-D18V - battery hydraulic crimping tool, 35 kN, CU150mm² for exchangeable dies series "35", "4" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPE-055-D18V - battery hydraulic crimping tool, 55 kN, CU185mm² for exchangeable dies series "60-H", "5" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

XXL dry keepingThe industrial condenser dryer DH 160 which can also be supplied in a stainless steel housing is characterized by a high dehumidification capacity, reliable continuous operation properties and practice-oriented equipment options alike. Designed for the operation whilst positioned on the floor, the device – given on-site preparation – can also easily be used when mounted to the wall or ceiling. Also it can be connected to existing ducted air systems. The dehumidifier DH 160 comes with a smoothly running scroll compressor for constant, pulsation-free pressure to ensure an energy-efficient refrigeration. Combined with its self-regulating EC radial fan this robust industrial dryer allows for a constantly high dehumidification performance during continuous operation even at low temperatures.

BPP-1303-D18V - battery hydraulic crimping tool, 130 kN, CU400mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 38 mm Battery: 18V/5Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPP-1302-D18V - battery hydraulic crimping tool, 130 kN, CU400mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 32 mm Battery: 18V/5Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPP-1301-D18V - battery hydraulic crimping tool, 130 kN, CU300mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 26 mm Battery: 18V/5Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPE-062-D18V - battery hydraulic crimping tool, 62 kN, CU300mm² for exchangeable dies series "60-CK", "22" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPL-035-D18V - battery hydraulic crimping tool, 35 kN, CU150mm²1 for exchangeable dies series "35", "4" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

For forced cooling, Seifert electronic offers compact fan units in various performance classes. The variable fin spacing in the high-performance heat sinks ensures strong cooling during fan operation. In forced convection cooling, fans are required as separate sources of convection. To ensure optimal convection during fan operation, it is recommended to incorporate heat sink profiles. The fin spacing in heat sink profiles is particularly important, as increasing the surface area is key for forced cooling. To push this boundary further, we have continuously reduced the fin spacing in our profiles. Depending on the model, up to three fans per cooler are possible, which can optionally be equipped with pressure chambers for improved air guidance. Most heat sinks are already equipped with aerodynamically designed hollow fins. Additionally, air deflectors for air guidance are available for some heat sink profiles.

Pneumatic diaphgragm pump with ratio 1:1. From 3/8" upt to 2", our standard pumps are specially designed for spraying equipment to ensure a long service life and easy maintenance. This enables us to offer an unrivalled low price for spare parts.

Pneumatic piston pump developed by Jerko. The pump is specially designed for spraying equipment to ensure a long service life and easy maintenance. This enables us to offer an unrivalled low price for spare parts. The necessary pressure to supply the spray equipment is generated by a piston pump developed by Jerko with a transmission ratio of 1:3.

Simplicity without having to abandon the proved Herrmann Ultraschall standards – that are the characteristics of this machine type. Proportional valve technology and digital high-performance generators are basic equipment. A solid machine design with precision guiding rails and proved drive components are the foundation for quality and repeatable welds.

eldec brazing systems: automatic induction brazing of pole coils The semi-automatic equipment is designed for manufacturing pole coils of hydro and wind power generators. The machine is based on the experience of the previous manufactured equipments. The machine is designed as a sturdy, high quality and low maintenance machine. The operating is very simple, on automatic mode by 2-hand operation with step by step program and on manual mode by touch-panel.

Equipment New triple filtration design: coarse filter, fine filter, magnet Filterbag Usable area 730 x 520 mm with load capacity 100 kg Unit out of plastic (PE), no risk of corrosion. Extra easy to maintain - Control box contains the complete control- and pump device. Can be exchanged fast and easy at malfunction. Drain device make the exchange of the bio cleaner easier.

The forming line consists of machines for orienting and forming a multi-layer strand mat for OSB production. The forming line consists of two mat formers including disc orienter heads to create the surface layer and one or two mat formers including pocket orienter heads to create the core layer. The threelayer strand mat thus produced enables high orienting degrees and is a prerequisite for meeting the relevant OSB-standard requirements. Additional devices for quality monitoring complete the function of Siempelkamp’s forming line. The plant modules can be adjusted to the respective requirements thus preparing the mat optimally for its compaction in a ContiRoll®. The equipment is designed to produce board thicknesses between 6 and 38 mm without any problem. The forming belt conveyor is a modular design as well tuned to plant output and feasible board formats.

The particleboard forming line consists of machines for forming and monitoring the particle mat. Additional devices for quality monitoring complete the function of Siempelkamp’s forming line. The plant modules can be adjusted to the respective requirements thus preparing the mat optimally for its compaction in a ContiRoll®. The equipment is designed to produce board thicknesses between 6 and 40 mm without any problem. A typical particle mat former consists of one or two mechanical mat formers for the core layer and two wind sifters for the top and the rear surfaces. The three-layer particleboard thus produced distinguishes by a homogeneous, core layer consisting of coarse particles and two surface layers, the particle size of which is decreasing from the core to the outer faces.

MDF forming lines consist of machines for forming and monitoring the bre mat. Additional devices for quality monitoring complete the function. The plant modules can be adjusted to the respective requirements thus preparing the mat optimally for its compaction in a ContiRoll®. The equipment is designed to produce board thicknesses between 1.5 and 40 mm without any problem. The forming belt conveyor is a modular design as well tuned to plant output and feasible board formats. Features Forming belt with pneumatic tensioning station as well as electric drive station and integrated automatic reject m Integrated belt scale for controlling the mat former output to ensure consistent product quality Mat moisture meter Automatic edge trimming system ex prepress Monitoring equipment to prevent steel belt damage peak detectors metal detector

Equipment New triple filtration design: coarse filter, fine filter, magnet Filterbag Usable area 730 x 520 mm with load capacity 100 kg Unit out of plastic (PE), no risk of corrosion. Extra easy to maintain - Control box contains the complete control- and pump device. Can be exchanged fast and easy at malfunction. Drain device make the exchange of the bio cleaner easier.

As the blue laser handheld 3D scanner of the FreeScan series, FreeScan UE inherits the iconic features of "high accuracy" and "high precision". At the same time ergonomic and lightweight equipment design, make it easier to hold and operate, providing metrologygrade, highaccuracy inspection solutions for the automotive, transportation, aerospace industry, moulding inspection, energy generation, machinery manufacturing and etc.Metrologyclass high accuracy Accuracy up to 0.02mm, Volumetric accuracy 0.02mm+0.04mm/m.Stability of repetitive measurement When measuring the same workpiece repeatedly, FreeScan UE delivers consistent results, proving stability and reliability.

Quick port handling – and therefore the reduction of the time that ships spend in port – is a priority for all port operators, regardless of the port’s size and whether it is at sea or inland. This largely depends on the reliability, robustness, and low maintenance requirements of the handling equipment used. KRÖGER’s different grab systems are ideal for the tough 24-hour working reality of ports and for almost all handling requirements. We are also extremely well equipped to design individualised grabs to meet specific requirements. Depending on the handling system, our grabs are equipped with hydraulic, electro-hydraulic or mechanical rope drives. They can therefore be used to unload small inland ships and large seagoing vessels, as well as for bulk cargo handling of any kind.

AHN's comprehensive Benchtop Equipment range includes a variety of centrifuges, such as small benchtop, universal, clinical, hematocrit, and refrigerated options, multiple vortex mixer options, rollers and rotators, and magnetic stirrers with and without heating. This range offers impressive user-friendly and safety features, making it easy and safe to use. Every instrument is extremely robust, designed for extended runs, and operates quietly. They also have a small footprint, taking up minimal benchtop space. Safety features include an electronic safety brake system to prevent the lid from opening during operation and suction pads for stable operation. The instruments are equipped with brushless DC motors that require no maintenance, making them ideal for extended runs. The equipment is designed with the user experience in focus, featuring large displays and intuitive interfaces for increased comfort. The equipment comes with a two-year warranty.

The MX-1000 is ideal for reading 1-D/2-D or DPM codes on automotive parts and label-based barcodes on packages and equipment. The flexible design accepts a variety of both current and future generation mobile devices and augments their capability in a fully ruggedized housing tough enough to stand up to the most challenging environments. The industrial-grade, rugged housing can handle up to 50 drops from 2 meters onto concrete. It is IP-65 sealed and uses inductive wireless charging so there are no exposed electrical contacts to wear out or fail.