Results for
APT ANGEWANDTE PROZESSORTECHNIK GMBH
Germany
Testing by means of mass flow method - Multi-channel applications possible - Different measuring ranges possible - Electronic pressure regulator - Completely remote controllable - Optionally remote controllable via ProfiNet
Request for a quoteCETA TESTSYSTEME GMBH
Germany
The flow tester CETATEST 915 is used for flow testing with compressed air. It includes a measuring system consisting of laminar flow element (LFE) and differential pressure sensor In the direct test method the air, provided by the internal pressure regulator, flows through the measuring section before it enters the test part.In the indirect method, the measuring section is located in the outlet flow of the test part. Due to the special design of the measuring section a laminar ow is generated. The resulting pressure difference is directly proportional to the volume flow. With the optional electronic pressure regulator and four calibrations for up to four test pressures the application range is substantially expanded. Special versions: The CETATEST 915-G is a fully automatic flowmeter for the detection of leaking parts. Typical applications: 915: Testing of valves, vehicle exhaust systems, pipes, membranes, 915 G: Gas appliance industry, after-work jobs in the automotive industry
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The pressure regulator versions with bleeder ports can be used for pressurized air or neutral gases. Due to their plastic housing these pressure regulators are light-weight and inexpensive. These pressure regulators are installed via flange connection on the bottom side. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. Connection is done by 1/8“ NPTF inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
These miniature pressure regulators fit into applications with low space requirements and low pressure levels. They work reliable and have a long life expectancy. A rotary knob is used to set the pressure level. The pressure regulator versions with bleeder ports can be used for pressurized air or neutral gases. These pressure regulators are built with a very robust brass housing. The pneumatic connection is done by M5 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. A rotary knob is used to set the pressure level. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. These pressure regulators can be connected by G1/8 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. Connection is done by 1/8“ NPTF inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. The pneumatic connection is done by M5 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The pressure regulator versions with bleeder ports can be used for pressurized air or neutral gases. These pressure regulators are built with a very robust brass housing. The pneumatic connection is done by M5 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
These miniature pressure regulators fit into applications with low space requirements and low pressure levels. They work reliable and have a long life expectancy. A rotary knob is used to set the pressure level. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. The pneumatic connection is done by M5 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. A rotary knob is used to set the pressure level. The pressure regulator versions with bleeder ports can be used for pressurized air or neutral gases. These pressure regulators are built with a very robust brass housing. These pressure regulators can be connected by G1/8 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. A rotary knob is used to set the pressure level. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. These pressure regulators can be connected by G1/8 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. The pneumatic connection is done by M5 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).
Request for a quoteSCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
The pressure regulator type 8042 in reinforced version is a smart combination of a pilot pressure regulator with a sliding gate control valve and is excellently suited for gases and vapors. The pressure regulator, which operates with auxiliary pneumatic energy, is characterized by highest dynamics and control quality. External or manual set point adjustment completes the compact and simple design of the valve and regulator.
Request for a quoteSCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
The pressure regulator type 8042 is a smart combination of a pilot pressure regulator with a sliding gate control valve and is excellently suited for gases and vapors. The pressure regulator, which operates with auxiliary pneumatic energy, is characterized by highest dynamics and control quality. External or manual set point adjustment completes the compact and simple design of the valve and regulator.
Request for a quoteSCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
The self operated pressure regulator Type 8011 in a reinforced version with closed spring cover in the form of a pressure reducing valve (downstream pressure regulator) or an excess flow valve (upstream pressure regulator) is used in a wide range of process engineering control tasks. Media such as steam, liquids, gases, etc. can be excellently controlled without auxiliary energy.
Request for a quoteSCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
The self operated pressure regulator type 8011 with closed spring cover in the form of a pressure reducing valve (downstream pressure regulator) or an excess flow valve (upstream pressure regulator) is used in a wide range of process engineering control tasks. Media such as steam, liquids, gases, etc. can be excellently controlled without auxiliary energy.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
CIC - KLAUS CZERWONKA
Germany
Compact series pressure regulator with plastic housing Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Flow rate at 6 bar with ∆p 1bar: 600 Nl/min Pressure range up to 15 bar
Request for a quotePLANET-AIR GMBH
Germany
The oil-free SILVER-LINE compressor OF-S90-4 is standardly equipped with a filter pressure regulator (manual condensate drain) and a 4 liter air tank.
Request for a quoteDELTA TECHNIK FILTERSYSTEME GMBH
Germany
Our installation systems with integrated safety control block are suitable for installation in pressurized lines. The integrated safety control block consists of a volume flow reduction unit and a pressure reducing valve. These two components make this system become a cost-effective, very safe, and technically fast operating solution. The mounting to existing systems and machines can be completed in just a few minutes, because there are only 2 connections and mounting material is also part of the system.
Request for a quoteWITT-GASETECHNIK GMBH & CO KG
Germany
Powerful and service reduced Dome Pressure Regulator applicable for mounting in pipeworks. Benefits: high pressure stability even when subject to fluctuations in withdrawal enables process reliability Pilot Control Tube (PCT) for particularly high constant outlet pressure applicable for almost all gases accurate dynamic regulation high flow rate Balanced Seat Design (BSD) for better control precision complete mounted, inclusive pressure gauge, pilot pressure regulator and fittings working pressure changable at any given moment (readjustable) – e.g. due to temperature fluctuations provides constant working pressure by dynamic control no disperse of pilot gas to the environment – closed system pressure gauges optionally in stainless steel and/or filled with glycerine indoor and outdoor installation connection for wall mounting panel easy installation and removal
Request for a quoteWEINLICH GMBH & CO. KG
Germany
The MP Computer is a comfortable, comprehensive and easy-to-handle evaluation, display and control unit for different types of engine test beds. Its clear and ergonomic arrangement fascilitates the work with the test bed. Desired loads can be adjusted quickly and easily. Specialists are not required. Many optional additional functions increase enlarge the comfort of the MP Computer. Maintaining permanent accuracy of torque measurement is facilitated by a semi-automatic calibration routine. Existing engine/motor test beds can be modernized by an MP Computer. Examples of optional additional functions: - Automatic gravimetric determination of the specific fuel consumption. - Several possibilities of output and documentation of measured values. - Acquisition of non-electric and electric measuring values on combustion engines, electric machines, etc. - Special functions required by certain measuring tasks.
Request for a quoteResults for
Electronic pressure regulators - Import exportNumber of results
23 ProductsCountries
Company type