• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • electronic controllers

Results for

Electronic controllers - Import export

GermanyManufacturer/producer

Germany

Germany

Verified by Europages

Reach for the stars! The innovative adjusting knob DKE01 combines a programmable electronic position indicator with a star grip or disk handwheel to offer a flexibly usable positioning unit. The indicated values can be configured application-specifically to cover the most varied areas of use with always the same basic device. Turning knob with integrated 5-digit LCD display. Digit height approx. 11,5 mm. Freely programmable via the ProToolDE programming software. Usable for length or angle measurement. Shaft accommodation: max. Ø 20 mm. Long battery life. With disk handwheel as an option.

Request for a quote

Germany

Verified by Europages

They are the accessories used in electronic panel control,after processing for a variety of color surface treatment.

Request for a quote

Germany

Verified by Europages

freely programmable Profile DKE01: Turning knob with integrated 5-digit LCD display Digit height approx. 11,5 mm Freely programmable display values Usable for length or angle measurement Shaft accommodation: max. Ø 20 mm Long battery life with disk handwheel as an option

Request for a quote

Germany

Verified by Europages

The generation of compressed air is always connected with the formation of condensate. In most cases, this condensate contains oil, is contaminated with dirt particles and spreads out in the entire compressed-air system. A system problem which can result in damage and additional costs. The BEKOMAT drains condensate in the compressed-air system in an electronically level-controlled manner. More than 3,000,000 installations worldwide make it the industrial standard for reliable and cost-effective condensate drainage.

Request for a quote

Germany

Verified by Europages

17 901 105 55000 rpm..; Collet 3,0mm, Continous speed regulation; Direction of rotation: right/left with potentiometer at electronic or foot control. Avaliable as a set: motor, electronic, foot control, deposit

Request for a quote

Germany

Verified by Europages

Demag rope hoists feature high handling rates, cost-effective operation and maximum safety. As basic hoist units for integration into plant and machinery or as lifting solutions with electronic controls that are optimized for crane applications, with our wide range of rope hoists we offer the optimum solution to meet our customers' specific requirements for efficiently lifting loads weighing up to 100 tonnes.

Request for a quote

Germany

Verified by Europages

The B250 is a completely electronically controlled disc humidifier that is fitted with an electonic sensor, which permits indicates the level of moisture in the air. Just configure the humidistat to the desired humidity, the one that’s right for you and the application and allow the completely electronic controlled unit do the rest. It is extremely nice to possess something that offers great dependability. The key lock is an extra feature that is purposed to provides added peace of mind. Simply input your exclusive combination to lock the units keypad and avoid unauthorized use, tampering or accidental access that may change the overall settings. Owing to the phrase used in Germany "trust is good, control is better" The B250 has a water level gauge that is located in the operational panel. Furthermore, there is no need stress about the unit going up in smoke of short circuiting.

Request for a quote

Germany

Verified by Europages

Bow and skew detection and control The Orthopac FMC automatic straightener is the heart and core of the Orthopac. The device consists of an optical scanning system and electronic control for distortion correction. It is used primarily to detect and log residual distortions in the exit end of a system, e.g. with the stenter. Thread density can be determined at the same time. It can also be connected to external straightening machines then serving them as control unit.

Request for a quote

Germany

Verified by Europages

Rapid developments in the fields of control engineering and in microprocessor and semiconductor technology have resulted in the widespread use of electronically controlled systems in every branch of industry today. This has created a need for sensors that are inexpensive but, at the same time, sufficiently robust, both electrically and mechanically, to withstand a wide range of temperatures (e.g. from -40 to +160 degrees centigrade), particularly in applications involving large quantities, such as the automobile industry. Fig. 1 provides a summary of the various types of sensors for angular and linear motion that are in use today. This paper is concerned with quality criteria (1) and (2) applicable to conductive-plastic potentiometers for use as sensors for angular and linear motion. Such potentiometers essentially comprise the following components: 1. The resistance element (support material + a resistance track of conductive plastic) 2. A wiper (precious metal alloy) 3. A...

Request for a quote

Germany

Verified by Europages

Klöpper Therm designs and manufactures specified switch and control cabinets in various designs – for nearly all types of electric surface heating. By the installation of electronic controllers, heating systems can be controlled in dependence of temperature and/or humidity. Arising disruptions during the control of temperature measuring sensors such as e.g. a falling below temperature, can be signalled or transmitted via indicator lights and/or dry contacts. The operating conditions of each heating circuit in the cold store is indicated by LED indicator lights. Via keylock or push buttons, all heating circuits can be checked quickly and simply. You can easily get an overview about economic efficiency and energy consumption of your heating system incl. documentation with an operating hours counter or energy meter.

Request for a quote

Germany

Verified by Europages

Variable notching possibilities for mullion and transom combinations, e.g. curtain walls, winter garden, sky lights and special designs. Notch variation: rectangle, one sided angular, two sided angular, 3 sided angular Notch dimensions: 210mm horizontal, 262 mm vertical (90°) Profile dimensions: height maximum 280mm, width maximum 320mm 4-axis adjustment of saw blades positioning via electronic control panel – Notch height – Swivel vertical blade – Swivel vertical and horizontal blade together – Material depth stop Power adjusted notch height – positioning via control panel 0 – 260 mm Power adjusted pivoting range saw blade vertical 90° – 60° + 30° (to front/to back) Power adjusted pivoting range horizontal + vertical saw blade 90° + 45° – 45° Pivoting range material fence on table manually left/right 30° – 90° – 45°, positioning by scale Depth stop power adjusted via control panel. Precise and safe notching due to the work piece is fixed on the table during the cut Hydro...

Request for a quote

Germany

Verified by Europages

Perfect fit: Fat remover ASF 560 E for pork belly and loin of pork. Maximum yield with little post-processing. Optimised blade holder profile for exact adaptation to the cross section of the product. Electronically controlled movement along longitudinal profile for exact adjustment to the fat contours. The result: Less fat on the pork belly/loin, less lean meat in the belly/back fat. Advantages Minimal post-processing after the processing workflow Line concept: Perfect integration of the machine in stripping workflows Options: Operating personnel can also remain outside the machine stand Curved blade holder profile for ideal product adaptation Special sub-frames (height adjustment)

Request for a quote

Germany

Verified by Europages

Because the units carry the label made in Germany you can be sure that you are buying a top-quality, highly efficient and extremely reliable heating unit which will carry on heating in the most hostile of environments and harshest of conditions. Theres also an electronically-controlled multistage switch to regulate air flow and air temperature so that you can carry out blasting, coating and painting work in fact almost any surface work at all - at a constant temperature both indoors and out. Here the low-down on the TEH 200: Heating performance: 40 kW Air flow rate: 3,000 m³/h Input voltage: 400 V Power consumption max.: 61 A Fuse protection / plug: 63 A / CEE 63 A, 5-pin Mobility: wheelable/ fork lift / crane Sound level (distance 3 m): 75 dB (A) Air pressure: 600 Pa Temperature increase ΔT: 60 °C Length: 1,625 mm Width: 800 mm Height: 1,270 mm Weight: 230 kg

Request for a quote

Germany

Verified by Europages

Description 17 901 104 35000 rpm.; Collet 3,0mm, Continous speed regulation; Direction of rotation: right/left with potentiometer at electronic or foot control. Available as a set: motor, elektronic, foot control, deposit 17 901 105 55000 rpm..; Collet 3,0mm, Continous speed regulation; Direction of rotation: right/left with potentiometer at electronic or foot control. Avaliable as a set: motor, electronic, foot control, deposit 17 901 103 Control unit for MP35 continous speed regulation, direction of rotation right/ left. regulation with control unit or foot control 17 901 107 Control unit for MP55 continous speed regulation, direction of rotation right/left. regulation with control unit or foot control. 17 901 106 Foot pedal for MP35 and MP55 Continous speed regulation; with connecting cable 17 901 108 Motor deposit for MP35 and MP55

Request for a quote

Germany

Verified by Europages

SPIROL’s Series 2000 Vibratory Feed Systems provide higher feed rates, gentler feeding, and the ability to accommodate a wider range of part configurations and materials than conventional feed systems. The advanced state-of-the-art electronic controller combines modern technology and unique features to deliver superior performance by continuously and automatically adjusting the drive system to the natural frequency of the bowl. This variable frequency technology compensates for changes in the bowl mass to ensure consistent feed rates and eliminates bowl tuning, allowing interchangeable bowls with a single drive. Additional benefits include increased energy efficiency, clockwise/ counterclockwise capability, reverse rotation, and significantly lower noise levels. The controller utilises a touch screen interface with the capacity to store 50 recipes. This system is ideal for fragile, tactile, and slippery parts. Visit www.SPIROL.com to learn more!

Request for a quote

Germany

Verified by Europages

17 901 104 35000 rpm.; Collet 3,0mm, Continous speed regulation; Direction of rotation: right/left with potentiometer at electronic or foot control. Available as a set: motor, elektronic, foot control, deposit

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

Germany

Verified by Europages

The B300 unit offers the best humidification in its segment. The B2300 mates superior appealing design with class leading technology to render a revolutionary humidifier that is purposed to the highest grades while combining unobtrusively into its stylish ambiance. There are however a few who would agree that the fetching form of the B300’s and the modern design even make it a masterpiece in its own right. Needless to say, the B300 is not just a glamorous humidifier from the outside, it is an extremely efficient piece of technology that is engineered to cater to the needed of extremely critical users who has a precise perspective of what they want when they decide to invest in a product that is made in Germany. Practical advantages: High-performance humidifier with multistage fan and large-sized water tank UV lamp for the effective disinfection of the service reservoir Fully-automatic operation electronic control via moisture sensor

Request for a quote

Germany

Verified by Europages

• 2.4 mm up to 6.4 mm Ø alu and copper • Up to 6 mm Ø steel & 5 mm Ø stainless steel • Up to fl ange diameter 11.4 mm • Rivet body lengths above 30 mm • Traction power up to 11,770 N at 6-7 bar air pressure Productivity and savings potential • Up to 40 blind rivets can be processed every minute • No trained personnel required for operation • Can be easily integrated into fully-automatic production systems • Electronic system controls • Intuitive menu guidance via navigation and function keys • Function display • Maintenance display and simple fault diagnosis • Customer-specifi c software modifi cation is possible • Ideal for applications that do not require any process monitoring • Rivet mandrels are disposed of by vacuum system • Spring loaded trigger system as an optional extra available • Can be integrated into the system or operated independently • Interface for external memory programmable control system (SPS) can be realised via the GESIPA® interface

Request for a quote

Germany

Verified by Europages

AccuBird® – Production • Developed and produced in Germany since 1992 by the inventor of the battery blind rivet setting tool Reliability • Electronic control • No mechanical switching components • Electronic temperature and overload protection • High reliability through low loss power transmission via a highly effi cient ball screw drive Freedom Cablefree tool for fl exible operation in installation jobs and industry production High performance • 10.000 N setting force • High pulling force for safe setting of blind rivets up to 5 mm diameter in all materials • High yield per battery charge • Large 20 mm stroke Versatility Blind rivets up to 5 mm Ø all materials. BULB-TITE® blind rivets 4 mm, 5,2 mm and 6,3 mm Ø alu and steel High speed • High speed of operation through automatic resetting of the jaw mechanism immediately after each setting process With Li-Ion energy • Choice of 2.0 Ah and 4.0 Ah Li-Ion batteries

Request for a quote

Germany

Verified by Europages

aluDISPLAY is a display enclosure available in three widths, with a modern design and well-thought out product features. Ideal for electronic controls and operating units with flat modules. Assembly or removal of the enclosure is extremely quick thanks to snap-on covering profiles. An internal profile slot enables circuit boards to be easily inserted or for system components to be directly attached with spring nuts. The front plate is ideal for the attachment of membrane keypads or the attachment of touchpanels. The aluDISPLAY can be connected with the ROLEC suspension arm system, taraPLUS, using the compatible end cover.

Request for a quote

Germany

Verified by Europages

The small steam boilers of the Junior 80 - 400 TC series are completely equipped, ready-to-operate, electronically controlled rapid steam generators with all safety devices for burner technology, pressure and temperature. With a height of only 1.5 m and 0.7 m width the Junior 80 TC steam boiler can be erected even in small spaces. Combustion: Oil or gas Steam output optionally 80 - 120 kg/h 150 - 200 kg/h 250 - 400 kg/h

Request for a quote

Germany

Verified by Europages

713X \ 726X \ 745X – WITH ELECTRONICALLY CONTROLLED DRIVE & CONTROL VIA JOYSTICK – LITHIUM BATTERY – CHARGER – LINE LASER – ERGOPACK TOOL-LIFT – SEALING TOOL – CONTROL VIA INDUSTRY TOUCHSCREEN INTERESTED? WE WOULD BE HAPPY TO VISIT YOU AND CONFIGURE THE SYSTEM INDIVIDUALLY WITH YOU ON SITE. 700X WITH ELECTRONICALLY CONTROLLED DRIVE & CONTROL VIA JOYSTICK LITHIUM BATTERY CHARGER CONTROL VIA INDUSTRY TOUCHSCREEN

Request for a quote

Germany

Verified by Europages

713E \ 726E \ 745E WITH – ELECTRONICALLY CONTROLLED DRIVE & CONTROL VIA JOYSTICK – 24V AGM BATTERY PACK – CHARGER – ERGOPACK TOOL-LIFT – SEALING HEAD We will be happy to discuss the individual configuration of your system in person after a product demonstration at your site. 700E WITH – ELECTRONICALLY CONTROLLED DRIVE & CONTROL VIA JOYSTICK – 24V AGM BATTERY PACK – CHARGER We will be happy to discuss the individual configuration of your system in person after a product demonstration at your site. 700 WITH – MANUALLY DRIVE VIA A HAND CRANK We will be happy to discuss the individual configuration of your system in person after a product demonstration at your site.

Request for a quote

Germany

The basic version of the Citymaster 650, designed as a compact implement carrier, already sets new standards in the 2t class for example with articulated steering, permanent allwheel drive with a fully electronic control system and extensive features providing increased comfort and safety at work. Thanks to its multifunctional design, the Citymaster 650 can be retooled quickly and easily, for example as a professional sweeper or an efficient snowplough for winter service tasks, which makes this machine not only extremely versatile in use but also particularly economical as it provides multiple application options.

Request for a quote

Germany

Professional internet power outlet strip can be used worldwide to control, measure and monitor electrical appliances via Ethernet (LAN). Integrated web server enables OS-independent operation with a web browser (PC, notebook, tablet, smartphone). Username and password required for access control. 2 independent switchable circuits can handle 16 A. Intelligent electronic control system optimises operation at high starting currents and extends the life of your appliances. Switching states can be changed and displayed individually on the device itself. Adjustable default switching state: Off, On, last active state. Integrated time control using flexibly programmable, time dependent rules: outlets 1 and/or 2, switch on or off, select days or specific date, time (hour and minutes). Automatic clock synchronisation (NTP) and changeover to daylight savings time/standard time. Professional power measurement at On/Off 1 (Master) outlet: measures active power and energy consumption, with...

Request for a quote

Germany

Professional internet power outlet strip can be used worldwide to control, measure and monitor electrical appliances via Ethernet (LAN). Integrated web server enables OS-independent operation with a web browser (PC, notebook, tablet, smartphone). Username and password required for access control. 2 independent switchable circuits can handle 16 A. Intelligent electronic control system optimises operation at high starting currents and extends the life of your appliances. Switching states can be changed and displayed individually on the device itself. Adjustable default switching state: Off, On, last active state. Integrated time control using flexibly programmable, time dependent rules: outlets 1 and/or 2, switch on or off, select days or specific date, time (hour and minutes). Automatic clock synchronisation (NTP) and changeover to daylight savings time/standard time. Professional power measurement at On/Off 1 (Master) outlet: measures active power and energy consumption, with...

Request for a quote

Germany

Electric flow heater for heating liquids, vapour and gases. Complete with electric or electronic control and monitoring unit. Technical flow heaters Heating power up to 1,500kW/h Voltages up to 690V Nominal diameters up to DN500 Nominal pressure PN16 to PN100 available Please contact us if you have any questions regarding our flow heater or if you need further information.

Germany

TOPTICA’s TeraFlash smart utilizes a proprietary scheme dubbed ECOPS ("electronically controlled optical sampling"). The system comprises two synchronized femtosecond lasers, eliminating the need for a mechanical delay. This results in extremely high measurement speeds: the TeraFlash smart acquires 1600 complete terahertz waveforms per second, enabling terahertz-based thickness gauging at unprecedented speed. The system thus lends itself to measurements on rapidly moving samples, e.g. conveyor belts, papermaking machines, or extrusion lines. Learn more about TOPTICA's advanced terahertz solutions.

Request for a quote

Request for quotes

Create one request and get multiple quotes form verified suppliers.

  • Only relevant suppliers
  • Data privacy compliant
  • 100% free