Electricity generators - Import export

Since the invention of the “Schniewindt grid” in 1902, we produce high voltage resistors and are thus among the pioneers in the electrical industry. Due to continuous development of our products and new developments according to the respective needs of the market, we are now one of the leading manufacturers of electric heating equipment, resistance equipment and sensors for current and voltage measurement

Application Motor as drive for a compressor for support of oil production.Special cooler design to withstand even sandstorms in the desert.

Application Hoist motors in various designs

Application Motors for hoist, boom hoist, travel and trolley for ship to shore cranes.

Application Hoist motors in various designs.

Application Generator for power generation in a hydro power plant with pelton turbine.

Application Generators for power generation in a hydro power plant with Kaplan turbine.

Application Generators for power generation in a cavern power plant with pelton turbines.Runaway speed 1,800 rpm

Application Utilization of the stored geothermal heat for generating electrical power.Suitable for safe operation in ATEX Zone 2 and earthquake area UBC Zone 4.

Application Used in Paper Factory

Synchronous generators from LDW are highly versatile and are used in shipbuilding, power stations and many other applications. Our generators can be driven by gas, steam or water turbines as well as diesel engines and other drivers. Synchronous generators from LDW have a high degree of efficiency and operate with extreme effectiveness. We develop and manufacture generators of the highest quality standards.LDW supplies synchronous generators with an output range from 4,000 to 60,000 kVA.Our synchronous generators are specially optimised for the specific application of the customer, e.g. if used for water power turbines with regard to runaway speed and turbine force absorption. Where diesel generator sets are used, the vibration load in particular is taken into account. On request, we will also construct the generator with a forged-on flange. A high degree of efficiency is ensured for all generators.

With the new EMX model range of electric steam boilers, CERTUSS offers you twice the steam output as before with a significantly smaller footprint. Electric steam generators from CERTUSS are heated by stainless steel heating rods with a large heating surface. The output of the heating elements is regulated continuously via semiconductor contactors. One energy-efficient advantage is the immediate modulating output adjustment to the actual steam demand during the operating cycle. For greater steam demand of up to 640 kg/h or fluctuating steam loads, several ELECTRO steam generators can be cascaded in series. Multiple systems like this are an especially economical solution. Our compact electric steam systems feature built-in feed water tanks and feed water pumps. They require very little space and have a short heat-up time. Steam systems are also available as a unit with water conditioning equipment installed at the factory.

TEPROSA GmbH has specialized for many years in the manufacture of sophisticated, precisely fitting laminated cores of exceptionally high quality. In the field of electrical steel sheet, we manufacture individual laminations and sheets for stators and rotors, as well as entire sheet packages stator- or rotor packages) from various steel grades. We process grain oriented electrical steel for generators, transformers and other electrical machinery. Our most common method for packaging the individual laminations is baked enamel technology. Alternatives are welding or bolting of laminations. As a long-standing supplier to various OEMs, the quality of our work is particularly important to us. Therefore, we work according to uniform processes and thus ensure consistent quality and complete traceability of each individual production step.

CERAMIC FAN HEATER TDS 10 MQuick, effective and draught-free warmth without burning dust The small ceramic fan heater is not only the ideal heating solution for allergy-sufferers to be used in living and work spaces. For, generally speaking, electric heaters are excellently suited for use in closed interior spaces, as they neither consume oxygen nor produce any combustion gases. The ceramic fan heater TDS 10 M still outweighs this commonly known advantage of electric heaters, for it is equipped with a PTC ceramic heating element instead of heating wires. Advantages of PTC as compared to heating wires: longer lifetime, less sensitive technology, shorter heat-up times, process-related overheating protection – and no burning of dust during heating, which additionally makes this ceramic heater suitable for allergy sufferers.

Where are magnetic field mats used? The coils currently manufactured by us are processed by our customers into so-called electromagnetic field mats. These mats are used in Pulsed Electromagnetic Field (PEMF) therapy. Many PEMF devices are suitable for private use at home. However, various health service providers including physical therapists as well as non-medical practitioners offer therapies based on magnetic fields. Why is our embroidery technology used for production? This technique creates circular-shaped structures that form the basis for a homogeneous flow/direction of the electric current. At the same time, the mechanical wire laying has an extremely high level of accuracy. The distances can also precisely be determined. How is the magnetic field created? Simply put, this is how electromagnetic fields are created: pulsating magnetic fields are generated by the electric current flowing through the wire. The more wire, the stronger the magnetic field.

When operating with green energy, the boiler allows your company to achieve a CO2-neutral steam supply. — Generate up to 7.5 t/h steam in a highly efficient way using just electricity – no combustion, no emissions — High steam quality, excellent dynamics, full flexibility — Reduced expenditure: No flue gas, no fuel supply — Application-specific design and particularly reliable operation — Smart boiler control and seamless system integration — System equipment and service from a single source

Optimization of the global efficiency of a power plant based on the Rankine Cycle, requires the incorporation of highly specialized equipment that supports the maximization of the efficiency of the steam cycle, reducing the primary energy consumption, minimizing the environmental impact and helping to optimize the OPEX and consequently the return on the investment. The highly increasing competitiveness among the different centralized electricity generation technologies and the increasing concern on environmental issues, force all the available generation technologies to improve their efficiencies, reducing the primary energy consumption.

The electrical steam generators E 100 M – 120 M from CERTUSS offer you impressive output in two output capacities of 100 - 120 kW heat output. They are compact, economical and have a high output. All electrical versions do not require a permit for installation and use in Germany. Heating: Electrical heating rods Steam output 135 – 160 kg/h The sizes: E 100 and E 120 - In two output capacities of 100 - 120 kW heat output. - Fully electronic pressure and output control. - Compact stainless steel heating rod with low heating surface load, placed laterally on the pressure body for easy access. - Constant network load without consumption peaks. - Integrated multifunction display. - Multilanguage plain text indication.

The electrical steam generators E 6 M - E 72 M from CERTUSS offer you impressive output in 14 different output sizes. They are compact, economical and have a high output. All electrical versions do not require a permit for installation and use in Germany. Heating: Electrical heating rods Steam output 8 - 97 kg/h The compact: E 6 M – E 72 M - In 14 different output sizes. - Easy-to-service compact device – easy to operate. - Direct access to all parts from the front for easy maintenance. - Fully electronic pressure and output control, immediate load adjustment. - Function and malfunction indications can be linked to central control system / building services control system provided by - customer. - Low space requirement, reduced and robust heavy-duty model in elegant design. - Fully automatic operation by means of time control or remote pulse (optional). - Automatic clarification and desalination (optional).

The discharging generator DG 306 is the power pack of the KERSTEN next product family and can be used to supply all the next® discharging components. With its 6 high voltage connections he can easily manage every large installations, nevertheless it is very compact. With the patented DC High voltage technology you don´t have to worry about EMC interferences anymore while you receive the best possible discharge power. By using the 24 V DC fault indication contact, you have the option to receive a fault signal directly in your system. the High voltage Generator DG 306 is supplied by a 24 v DC input voltage and is therefore independent of the world´s different network standards. The generator provides two insulated and against reverse polarity secured high voltage connections, where discharging devices can be fast and easily connected to.

Particularly for testing passenger car engines, truck engines and transmission units with combustion engines, when - the electric mains is too weak for frequency converters, - cooling water is not available or water-cooling is not desired, - air-cooled eddy-current brakes are not sufficient.

Our engine test beds are modular systems existing of control unit, dynamometer and mobile engine supports. Applications: Determination of engine performance, runnning engines under a defined load in order to determine other measuring values. Fields of application: Science, development, quality control by manufacturers and control authorities, education (especially air cooled dynamometers). New: Container for outdoor installation for performance testing at combustion engines with all kinds of dynamometers. Our range of engine test beds: - with eddy-current brakes (air-cooled or water-cooled) - low-inertia hydrostatic braking dynamometers - braking dynamometers with water brake - regenerative 4-Q-dynamometers - electric generators, loaded by resistors

Arc magnet is one of the basic shapes of Neodymium magnet, also called segment magnet, they are widely used for electric motors, PM motors and generators in the electrical engineering and electric vehicles etc. Arc magnet can be made with high Hcj materials to match special motor applications, it can be consistency for torque performance and ground to meet high precision and concentric requirements.

The production of electric motor and generator laminations imposes strict requirements on the press and automation. ANDRITZ Kaiser looks back on decades of experience in the electric motor laminations sector and provides the customer with state-of-the-art solutions. Precise timing and general performance are required for competitive productivity of high speed stamping systems for laminations. Due to the large amount of cutting operations required, a very rigid machine is needed to absorb the cutting impact without damaging any machine part. Finally, the tolerances of 0,02mm in the tools and the end product call for a very precise slide movement, slide guideance and low frame deformation. Our well designed and thoroughly tested concept allows customers to manufacture high-quality products with maximum efficiency. ANDRITZ Kaiser production lines for electric motor laminations are characterized by the following features: Highly stable machine with split-design, cast iron frame for...

Fixed gas detection system for oxygen, toxic and combustible gases This DIN – rail mounted modern control module saves space, money and installation time. One safe controller for all gases: Any combination of a sensor head plus control module is a complete gas detection system. This makes the Statox 501 so safe and reliable. The Statox 501 also gives you the opportunity to alter or expand existing systems with minimum cost and labor. Programs for all gases and measuring ranges are permanently stored in the memory of the controller. The user-friendly software program allows authorized personnel to select different configurations by a simple push of a button. Easy to install and easy to use The controll modules as well as the power supply and the common alarm module clip on to a DIN rail. The remote sensor heads and any alarm or recording devices connect to terminals on the front of the module. Each Statox 501 control module has three relays for alarm 1 and 2 and system failure (115 / 230 V AC / 2 A). An analog output for recorder or process control systems is also included. Measured values are displayed on a 4 digit LED-display. It is easy to program or calibrate the Statox 501! Just follow the menu! If intrinsically safe transmitters are to be installed in division 1 areas, they can be connected via intrinsically safe repeaters. 24 V power supply as well as the signals for the common alarm module are transmitted via bus from one module to the next. All terminals are easily accessible from the front. Field proven sensors for reliable gas detection Compur manufactures electrochemical sensors for the detection of oxygen deficiency and toxic gases. These sensors generate an electrical current proportional to the actual gas concentration. The remote sensor heads are designed as intrinsically safe certified 4 - 20 mA transmitters and have an integrated concentration display. Combustible gases can be detected with a variety of catalytic beads (pellistors) or infrared technology. The sensor heads are certified "Ex d" or "Ex de" and can be connected directly to the control module, even if they are to be used in classified areas. The control module can supply and operate different designs of catalytic sensors. With so many possibilities, the system can easily be tailored to suit your individual application needs. Easy maintenance saves time and money Maintenance of the 4 – 20 mA transmitters is very easy. A one-man calibration or replacement of the sensors can be done without further precautions, even in classified areas. Accessories A range of wall-mount cabinets for a maximum of 5, 8 or 32 controllers as well as a 19”-carrier, ensure an easy professional installation. -20 - +60 °C

The Oxyfire™ in-situ oxygen sensor measures oxygen concentrations directly in the "high heat" zones of high temperature furnaces, boilers and incinerators. They are intrinsically safe, requiring no electrical input power, and generating only a low millivolt output. FEATURES • Available in a number of standard lengths up to 48" (1200 mm) • Field performance can be easily verified using integral verification gas port • Intrinsically Safe per EN50 014 (1977) clause 1.3 • Temperature Range: 1000°F (min) to 3000°F (max) / 538°C (min) to 1649°C (max) • Robust design eliminates "auxiliary sheaths" required on lower quality products • Single side connections ensure cables are safely away from the hot furnace wall • Proven track record: used in more furnaces, boilers and incinerators than all other high-temp probes combined • No drift or accuracy problems common to "side hole" probes • High quality construction eliminates the need for cooling air • Proprietary installation configuration...

System for the impregnation of electomagnetic coils, e.g. of electric motors, transformers, generators Impregnating in electricla engineering means applying an impregnating agent in gaseous or fluid form to a porous body in order to insulate it electrically, i.e. that reliable protection against electrical breakdown is provided even when the thickness of the insulating layer is small. For each application HÜBERS provides appropriate process. HÜBERS offers all relevant process variants including vacuum impregnation, vacuum-pressure impregnation and atmospheric impregnation and of these coupled with the use of the many different impregnating agents such as varnish, resin, oil, wax, gas etc. The processes of evacuating the parts prior to impregnation and if necessary of vacuum-drying the impregnated parts are matched to the properties of the parts and ensure that the agent wets the walls of the pores properly and fills the cavities completely.

PET strapping is particularly tear-resistant and elastic at the same time. Thus they reliably absorb shocks during transportation and, depending on width, can sustain loads of between 185 and 580 kg. Our PET strapping is available in widths of 9.5 to 15.5 millimeters with tight fabrication tolerances. After use, it can be easily fed back into the material cycle, since it consists of 100 % recyclabled plastic bottles (bottle flakes). It has a high stability for optimal load security. Its constantly high quality ensures a high machine availability. Most frequent fields of application: • Corrugated cardboard industry • Printing industry • General logistics • Electrical industry (TVs, cooling/heating units, kitchen equipment) • Automotive industry (equipment and spare parts for cars, trucks and bikes)

Ultrasonic converters, also called transducers or oscillators, convert highfrequency electrical voltage generated by ultrasonic generators into a mechanical vibration of the same frequency. The piezoelectric effect is used here. The ultrasonic converter forms the starting point of the oscillation system and transmits the vibration to the booster and sonotrode. Our soniKKs converters captivate with their compact design, reliability and durability. As all our products, they are also "Made in Germany". The resonant body is made of titanium or steel. We are also happy to manufacture special converters and housings according to your needs. Your Advantages “Made in Germany” Compact design High reliability, durability, and costeffectiveness Production of special converters/housings on request Resonance base body made of titanium or steel Also suitable for the food and pharmaceutical industry