Electricity cabinets - Import export

Klöpper Therm designs and manufactures specified switch and control cabinets in various designs – for nearly all types of electric surface heating. By the installation of electronic controllers, heating systems can be controlled in dependence of temperature and/or humidity. Arising disruptions during the control of temperature measuring sensors such as e.g. a falling below temperature, can be signalled or transmitted via indicator lights and/or dry contacts. The operating conditions of each heating circuit in the cold store is indicated by LED indicator lights. Via keylock or push buttons, all heating circuits can be checked quickly and simply. You can easily get an overview about economic efficiency and energy consumption of your heating system incl. documentation with an operating hours counter or energy meter.

Together with our customers, we develop scalable control and automation solutions for their assembly, laser and ECM lines to meet their requirements. In doing so, we attach great importance to the topicality and future-proof development of the technology used. Programming under SIEMENS SPS, SIEMENS NC, BECKHOFF HMI and robot technology are our specialties. We are experts in realization drive and feedback control engineering, electrical project planning, control-cabinet construction, software development and control engineering.

Pre-fabricated STRATE AWASTATION service buildings are set up directly on top of shafts (STRATE AWALIFTSCHACHT) or optionally alongside shafts on concrete foundation blocks. Pre-fabricated solutions offer the possibility of housing system components e.g. shaft cabinets, control elements, electric systems and service connection so that they are easily accessible integrating further optional system components e.g. STRATE AWAaerob ventilation systems, operating data recording and remote transmission etc. One-piece pre-fabricated concrete building, suitable for road and crane transport with four threaded attachment and transport sleeves Re-siting of the service building is possible Inside walls: exposed concrete, painted with washable dispersion paint, colour according to customer wishes Outside walls: textured render, painted in colour according to customer wishes Floor: smooth concrete floor plate with openings for shaft cover, cable duct etc.

The BaCo 2400 is a fully automated, linear motor driven, filling, foil application, foil sealing and capping machine, suitable for creamy to liquid filling media. Capacity: 35-40 pcs per minute Available versions: Fill/Seal, Fill/Cap, Seal/Cap, Fill/Seal/Cap machine frame from aluminium profile indexing transport system for jars horizontally working conveyor for jar infeed and discharge position control for jars in indexing rotary transport dosing pump from 1.4404 10 l hopper with level control filling nozzles driven by LinMot-e-motor pick and place system for pre-cut foils from magazines driven by LinMot-e-motor 1 spot sealer to fix the foil at the sealing rim of the jars sealing system with conduction sealing head capping station with LinMot-e-motor infeed conveyor for caps electric cabinet with operation panel manual central lubrication system safety doors with aluminium profile frame and windows from makrolon

The PURION MULTIPLANT 2501 / 8 is designed to enable UV based disinfection for high flow rates up to 120 m³/h. The electric control cabinet can be equipped with the Operating Time Counter (OTC 2) or Operating Power Detection (OPD 2) via sensor. The potential free contact D1-D2 (error sum signal) enables easy integration into existing monitoring systems. options for configuration: hot water up to 90 °C Operating Time Counter OTC 2 Operating Power Detection OPD 2 advantages: additional chemicals are not required for disinfection not affecting smell or taste low-maintenance operation low operational costs Please contact us for targeted advice: mail: uv-technology@purion.de phone: +49 3682 479087

The PURION PRO MULTIPLANT 2500 / 6 is designed for UV based disinfection in case of high flow rates and special liquids with very low transmission. The electric control cabinet can be equipped with the Operating Time Counter (OTC 2). The potential free contact D1-D2 (error sum signal) enables easy integration into existing monitoring systems. options for configuration: hot water up to 90 °C Operating Time Counter OTC 2 advantages: additional chemicals are not required for disinfection not affecting smell or taste low-maintenance operation low operational costs Please contact us for targeted advice: mail: uv-technology@purion.de phone: +49 3682 479087

The PURION MULTIPLANT 2501 / 6 is designed to enable UV based disinfection for high flow rates up to 90 m³/h. The electric control cabinet can be equipped with the Operating Time Counter (OTC 2) or Operating Power Detection (OPD 2) via sensor. The potential free contact D1-D2 (error sum signal) enables easy integration into existing monitoring systems. options for configuration: hot water up to 90 °C Operating Time Counter OTC 2 Operating Power Detection OPD 2 advantages: additional chemicals are not required for disinfection not affecting smell or taste low-maintenance operation low operational costs Please contact us for targeted advice: mail: uv-technology@purion.de phone: +49 3682 479087

Electrical cabinets contain the electrical and electronic components of a process engineering system, a machine tool, or production equipment that is not directly located in the machine. They are manufactured by special switch cabinet builders or by the machine manufacturers themselves. To save costs, there are automation solutions that are not only worthwhile for large production series, but are also suitable for the more efficient and economical production of individual and small series. Metzner offers a unique and comprehensive system solution to reduce your expenses in switchgear construction. Depending on your requirements, different stripping and crimping machines are available, which differ in terms of design, performance and degree of automation. METZNER TRIATHLON SERIES - for precise cutting to length and one- or two-sided stripping - for crimping the ferrules (single- and double-sided) - for individual labelling of strands with different printing method

The BaCo 2400 is a fully automated, linear motor driven, filling, foil application, foil sealing and capping machine, suitable for creamy to liquid filling media. Capacity: 35-40 pcs per minute Available versions: Fill/Seal, Fill/Cap, Seal/Cap, Fill/Seal/Cap • machine frame from aluminium profile • indexing transport system for jars • horizontally working conveyor for jar infeed and discharge • position control for jars in indexing rotary transport • dosing pump from 1.4404 • 10 l hopper with level control • filling nozzles driven by LinMot-e-motor • pick and place system for pre-cut foils from magazines driven by LinMot-e-motor • 1 spot sealer to fix the foil at the sealing rim of the jars • sealing system with conduction sealing head • capping station with LinMot-e-motor • infeed conveyor for caps • electric cabinet with operation panel • manual central lubrication system • safety doors with aluminium profile frame and windows from makrolon

Bright Chrome Plated Zinc Alloy Handle,Padlock version available,Easy Installation,ROHS compliance

Nanometer painted Zinc Alloy housing,handle and insert,1P or 3P cam,Quick Open,Easy Installation,ROHS compliance

Zinc Alloy and Stainless Steel versions available,Opening angle 180°,ROHS compliance

Black Powder Coated Zinc Alloy or PA6 Housing and Handle,90 degree handle rotation combines with rod latch to open or close,Easy Installation,ROHS compliance

Pocked Black Powder Coated Zinc Alloy Housing and Handle,90 degree handle rotation combines with rod latch to open or close,Easy Installation,ROHS compliance

Black Powder Coated Zinc Alloy Housing and Handle,with or without button,Quick Open,Easy Installation,ROHS compliance

Bright chrome plated Zinc Alloy Hinge.Maximum Static Load: Radial Load:2000N,Axial load:1520N.Steel and Stainless Steel versions are available, size can be customized.ROHS compliance.

In the production phase, our experienced engineers will implement our innovative ideas in turn-key plants. The close coordination between our project managers and our assembly teams ensures efficient and high-quality production results. After the successful completion of the test phase, the plant will be handed over to you. Safety certificates and declarations of conformity (CE marking) will be issued upon your request. Electrical Assembly esmo automation provides and installs electrical cabinet systems and components as per customer specifications. We will check your equipment prior to commissioning, and support you in any maintenance issues as well. Furthermore, we conduct safety checks and adapt obsolete facilities to current standards. Design + Engineering We plan and design control cabinets and create wiring diagrams for your individual applications. With the support of professional tools, such as EPLAN P8, we develop customized designs.