Results for
SCHNIEWINDT GMBH & CO. KG
Germany
Since the invention of the “Schniewindt grid” in 1902, we produce high voltage resistors and are thus among the pioneers in the electrical industry. Due to continuous development of our products and new developments according to the respective needs of the market, we are now one of the leading manufacturers of electric heating equipment, resistance equipment and sensors for current and voltage measurement
Request for a quoteKAUP GMBH & CO KG
Germany
The here and now is electric. This is not exclusively true for cars and industrial trucks of various kinds. Even attachments for automated guided vehicle systems, forklift trucks or pedestrian stackers are now electrically powered. With the e-op series, KAUP has electrified the most important implement functions and its range includes Sideshifter, Fork Positioner, Rotator and Double Pallet Handler with electronic drives for a wide variety of material handling tasks.
Request for a quoteETH MESSTECHNIK GMBH
Germany
For disconnection of electrical power wrenches in connection with Value Master Base or GMV2 100 - 240 V / 50 - 60 Hz switching capacity approax16 A protection IP64 Safety plug
Request for a quoteETH MESSTECHNIK GMBH
Germany
For disconnection of electrical power wrenches in connection with GMV2 100 - 240 V / 50 - 60 Hz switching capacity approax 16 A protection IP40 Safety plug
Request for a quoteEISELE GMBH
Germany
- Operating voltage: 630 V AC/DC- Up to 12 A per pin - Operating current per contact max. 12 A - 4-pole - S-coded - Temperatur (fixed line): -25 bis +80°C - Temperatur (moving line): -20 bis +80°C - Material: PUR - Very compact connection for cables with wires up to 2.5 mm² - Reverse polarity protected, shockproof and vibration-proof - Made of high-quality plastic - Molded wires
Request for a quoteMERECS ENGINEERING GMBH
Germany
EOL test stand for e-charging columns and their power electronics for the simulation of different electrical loads and mains fluctuations. The test stand has automatic contacting and achieves high test throughputs in end-of-line operation. Different variants of the power electronics of electric charging columns can be tested. On the software side, Merecs Engineering relies on NI-LabVIEW and NI-TestStand.
Request for a quoteBURRE HYDRAULIK GMBH
Germany
Media: hydraulic oil, cooling water, compressed air, fire fighting water, Electric signal lines, electric power lines Constructions from 2 ways up to 14 ways
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
10 mm width, bistable latching solenoid valve or bistable 3/2-way solenoid valve which require only a short electrical power pulse to change the state. On request other sealing materials like EPDM or FKM are possible.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
10 mm width, bistable latching solenoid valve or bistable 3/2-way solenoid valve which require only a short electrical power pulse to change the state. On request other sealing materials like EPDM or FKM are possible.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
10 mm width, bistable latching solenoid valve or bistable 3/2-way solenoid valve which require only a short electrical power pulse to change the state. On request other sealing materials like EPDM or FKM are possible.
Request for a quoteLIPP GMBH BEHÄLTER UND SYSTEMLÖSUNGEN
Germany
SYSTEM SOLUTIONS FOR SEWAGE SLUDGE DIGESTION In the municipal sector, the focus is on the production of biogas from sewage sludge. The aim is to make the energy potential of the primary and secondary sludge from anaerobic sludge digestion usable. On the one hand heat and electrical power is obtained for operation of the sewage plant. On the other hand, the sludge is conditioned so that the other aerobic process stages can run more efficiently and thus more cost effectively. The Lipp KomBio reactor has established itself as an ideal solution in the municipal sector due to its construction and long service life and has been successfully installed in hundreds of plants at home and abroad. Thanks to the application of the SBR process in our digesters, and the tank geometry and construction, it is possible to make optimum use of the low energy potential of the sewage sludge and operate sewage sludge digestion economically.
Request for a quoteGW BATTERIEN GMBH
Germany
Perfect solutions to ensure your batteries have a long lifecycle The choice of the correct charging device is important for the lifecycle and performance of the batteries. A battery charging device is used to provide electrical power to recharge the flat battery. To this end, the charging voltage and the charging current must be tailored to the respective battery (capacity and technology) and its charging state. We offer you: Stationary charging systems designed in accordance with conventional and cutting-edge technology for the safe supply of energy to the batteries Maintenance case Safety equipment And much more
Request for a quoteKLÖPPER-THERM GMBH & CO. KG
Germany
Klöpper Therm electric flow boilers are used for generating hot water in heating units for direct heating, storage operation or for Power to Heat systems. As an alternative to other energy types in new buildings or when converting central heating units, these boilers offer a universal range of applications radiator heating, floor heating, mixed systems or bivalent operation with other energy types. Depending on the relevant operating conditions of the energy supplier, the boilers are used for direct or storage heating by utilising free electric power during off peak times.
Request for a quoteZOLLER & FRÖHLICH GMBH
Germany
Technical information The Z+F EVOPRESS is an electrically driven crimping press for processing a wide variety of electrical connectors such as Z+F ferrules and Z+F terminals. With its compact design it fits into the Z+F EVOLINE. Crimping Machines, such as the Z+F EVOPRESS, are electrically powered tools specialized in the precise processing of various electrical connections. These machines are particularly utilized in handling electrical components like Z+F ferrules and Z+F cable lugs. Their primary function involves establishing a secure and durable connection between electrical conductors and their corresponding terminals through the application of pressure. The Z+F EVOPRESS and similar crimping machines not only deliver high performance but also provide the capability to process various types of electrical connectors with precision and efficiency. Key Features of the Z+F EVOPRESS: Enhanced hand safety with a protective glass at the front of the machine
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For stripping solid, stranded or finely stranded conductors with standard insulation • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • With adjustable screw for easy adjustment to the required wire or strand diameter • With opening spring • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened
Request for a quotePURION GMBH
Germany
The UV-plant PURION 2500 36 W is made from electropolished stainless steel 1.4571.The PURION 2500 36 W is applied to disinfect drinking water up to a flow rate of 2.500 l/h and a transmission (or turbidity) of the water of at least 90% per T1 cm. The UV-plant PURION 2500 36 W can be optionally operated with 24 V direct current. The very attractive relation between the electrical power of 36 W and the flow rate of 2.500 l/h is to be emphasized. advantages: additional chemicals are not required for disinfection not affecting smell or taste low-maintenance operation low operational costs Please contact us for targeted advice: mail: uv-technology@purion.de phone: +49 3682 479087
Request for a quoteCML TECHNOLOGIES GMBH & CO. KG
Germany
Description Average Lifetime AC Electrical features Voltage Power Mechanical features Lamp size Socket Diameter
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
AERO-LIFT VAKUUMTECHNIK GMBH
Germany
Vacuum lifting devices for flexible use with power unit and without electrical power supply. inquiry Example of use AERO-LIFT lifting devices with power unit Vacuum lifting device AERO 500/8L-Aggregat Vacuum lifting device with power unit for outdoor use. Handling of airtide wooden elements with a maximum dimension of 6000 x 520 mm and a weight of 500 kg. Vacuum lifting traverse carrying capacity 12.000 kg mains free lifting device to unload trucks in the outdoor area with a load bearing capacity of 12,000 kg. With integerated gasoline power supply for the vacuum generation.
Request for a quoteTOPTICA PHOTONICS AG
Germany
The Holo-Litho 405 is the ideal replacement for the vintage, power hungry Kr+ gas lasers (406.7 nm and 413.1 nm) commonly used in holographic and lithographic applications. While gas lasers require several kilowatts of electrical power and cumbersome water cooling, the “all‑semiconductor” Holo-Litho 405 draws < 0.08 kW and needs no water cooling to produce similar optical output power. This alone results in a significant reduction in cost of ownership. Furthermore the user also benefits from longer service intervals and lower refurbishment costs. Trained personnel can easily perform on-site replacements of the individual semiconductor field replaceable units, reducing down-time and increasing profitability.
Request for a quoteRHODIUS ABRASIVES GMBH
Germany
Grinding wheel for use in end grinding on compressed-air grinders and electrically-powered straight grinders. Use with ASB XT. • High stock removal performance • Long lifetime • Few sparks
STAIGER
Germany
Proportional regulation and control of high flow rates • Frictionless movement; • High flow rates; • Small footprint and size; • Low power consumption; • Pressure-balanced; • High dynamics; This valve combines the advantages of the Spider-μProp technology with the benefits of a pressurebalanced valve. Due to its large orifice, high flow rates are possible. Furthermore, the valve is distinguished by a high reproducibility of the lift-off point. The electrical power consumption lies thereby in the lowest range of the Plate Armature Technology. The compact design of the valve provides a variety of assembly options for different areas of application.
Request for a quoteHAACON HEBETECHNIK GMBH
Germany
Screwed drum: easy replacement of the actual rope drum from smooth to grooved subsequent attachment for divider stored on both sides Speed: The winch can be delivered with 10m/min without additional effort, instead of the slow 6m/min used in the competition Rope attachment: The winch can take up to 120m / 150m rope as standard Construction: compact, due to the use of high-quality ropes high quality, by using the best materials Security: designed with sufficient reserves, both in terms of statics and motor design high quality industrial planetary gear Brake motor IP55 400V 3 phases 50 Hz. (other voltages and degrees of protection on request) Design according to 1Am electronic overload protection Limit switching Optional: Enclosure Drum cover Pressure roller Slack rope switch Frequency control customer-specific control systems Coupling grooved drum Emergency manual operation Offshore coating Radio remote control split drum
Request for a quoteMINEON HANDEL GMBH
Germany
Bright Chrome Plated Zinc Alloy Handle,Padlock version available,Easy Installation,ROHS compliance
Request for a quoteMINEON HANDEL GMBH
Germany
Bloack Powder Coated Aluminum Alloy Handle, Lock Plate, Housing, Steel Cam,Easy Installation,ROHS compliance
Request for a quoteMINEON HANDEL GMBH
Germany
Zinc Alloy and Stainless Steel versions available,1333key or Non-locking version,Door Cutout: Ø22.5*20.1mm,Easy Installation,ROHS compliance
Request for a quoteMINEON HANDEL GMBH
Germany
Zinc Alloy and Stainless Steel versions available,1333key or Non-locking version,Door Cutout: Ø22.5*20.1mm,Easy Installation,ROHS compliance
Request for a quoteMINEON HANDEL GMBH
Germany
Bright chrome-plated ZDC housing and insert, white zinc-plated steel cam,Head Diameter Ø22,Door Cutout: Ø19.5*16.5mm,Easy Installation,ROHS compliance
Request for a quoteMINEON HANDEL GMBH
Germany
Black PA Wing Knob and Zinc Alloy housing and insert,different keys available,Housing Length 18mm,30mm,40mm available,Door Cutout: Ø22.5*20.1mm,Easy Installation,ROHS compliance
Request for a quoteMINEON HANDEL GMBH
Germany
Blue gray powder coated ( RAL 7012 ) ZDC housing,PA handle,Padlockable,Door Cutout: Ø22.5*20.1mm,Easy Installation,ROHS compliance
Request for a quoteResults for
Electric power - Import exportNumber of results
43 ProductsCountries
Company type
Category