Electric heating - Import export

Electrical Surface Heating that brings heat to cold areas – for cold storage and cooling chambers as well as industrial plants and open spaces.

Electrical heat tracing systems are used in all industrial sectors in order to heat up products in pipelines and vessels to maintain temperatures or to avoid freezing of the product. This type of heating offers several advantages It is highly flexible and adaptable to fulfil the specific customer requirements and ensures the effective and economic utilization of the input energy. Our customers appreciate the high accuracy of temperature control and the low maintenance costs. We offer harmonized components, engineering, delivery and installation from a single source.

Our fields of expertise are in areas where processes are influenced by temperature changes. We act as a reliable partner always there where electric heating technology, integrated with functional process control, requires high operational safety.

The latest version of heating controller UNIPLEX made by Klöpper Therm again satisfies with development competence and future oriented technology in one device. Especially designed for the control and monitoring of electric heating systems, it combines several functional elements in one device. Temperature controller, safety temperature limiter and current regulator are arranged in a space saving way on a 19” plug in board in European standard size.

xiros® A500 heat Plastic ball bearings for high temperatures up to +150°C Product range xiros® A500 chemistry Plastic ball bearings with high resistance against chemicals. Product range xiros® A500 economical alternative Plastic ball bearings as an economical alternative. Product range xiros® A500 wear resistant Plastic ball bearing with wear resistance improved by factor 3. Product range Cage: PEEK PA Balls ES = stainless steel GL = glas PAI = Polymer xiros® A500 heat Plastic ball bearings for high temperatures up to +150°C Product range xiros® A500 chemistry Plastic ball bearings with high resistance against chemicals. Product range xiros® A500 economical alternative Plastic ball bearings as an economical alternative. Product range xiros® A500 wear resistant Plastic ball bearing with wear resistance improved by factor 3. Product range

With our textile-based electric elements we offer a better solution for surface heating in comparison to classic silicone heater. Our elements heat up to 200°C, and they are lightweight and cost-efficient. We are capable of manufacturing components of sizes up to 2.140 x 1.800 mm. Please contact us to receive an offer.

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G1 1/2 are mainly used to heat water and aqueous solutions. 3 tubular heating elements ø 8,5mm made of stainless steel 1.4404 resp. Incoloy 825 brazed in G1 1/2″ thread made of brass (lead free) or stainless steel. Connection to 230/400 V3 (N), rotatable stainless steel terminal box. Use e.g. in washing machines, dishwashers, tempering equipment, laboratory equipment. The heaters are also suitable for water heating with photovoltaics, primarily the EHK G1128xxx series. Combination with all common PV controls possible, stepless power output. Type EHK G112-A with built-in thermostat 0-95°C Type EHK G112-AB with built-in thermostat/limiter 30-80°C / 100°C Type EHK G112-U without integrated control unit

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. The construction of RiRo-nta is identical with RiRo-nt except for the fact that heating power can be steplessly regulated by our built-in thermostat. It keeps the temperature of your choice constant between +5°C and + 30°C or just protects your room from frost. The red signalling light shows when power is on.

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. With these heaters the excess temperature touching the top of the fins does not exceed 67K (difference of 67°C to room temperature).

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. The heater RiRo-fa is identical with type RiRo-f, but additionally heat transfer can be controlled steplessly by our built-in thermostat. According to your needs the heater will keep the room frostprotected or the temperature will be kept constant at your choice between + 5°C and + 30°C. Applicable for rooms with risk of fire. Max. 115°C on top of the fins.

If you are looking for a very efficient heating solution tailored to your needs that comes with competitive prices and short delivery times, please contact Embro and get the best service and high-quality products Made in Germany and Made in Europe!

We are using CNC - technology for the laying of thin and insulated heating wires on a variety of carrier materials in order to manufacture all kinds of heating elements. We can work up to sizes of 2 x 2 m, and we can realize medium series (500 - 10.000pcs.) as well as high volume productions (up to 1 million pcs.). All voltages from 3,7V up to 480V are possible. With our elements we can reach temperatures of up to 200°C. Please do not hesitate to contact us!

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. The heating power is steplessly adjustable and the thermostat keeps your chosen temperature constant. Choose either frost protection or your temperature between + 5°C and + 30°C. The red signalling light shows when power is on.

Embro is a German manufacturer of textile-based heating elements and pads. The elements are highly flexible, lightweight, and they are ideal for all kinds of mobile heating solutions such as: > car seat heaters > steering wheel heaters > heating elements for garments (jackets, gloves, ...) Furthermore, our elements are often used in infrared heating panels, too. Do not hesitate to contact us for further information.

Electric heat press for textile transfers. ✔ Singe platen ✔ Even temperature and pressure ✔ Opens and closes automatically ✔ 30 x 40cm base plate ✔ No compressor ✔ Pull out base plate This neat looking heat press is great for small businesses and DIY. The fully electric heat press is designed for small quantities. Due to its electric closing mechanism, it is easy to operate without exhausting your arm. Using a small display, you can adjust temperature and dwell time to your likings and save pre-sets for reoccurring applications. In automatic mode, a small sensor closes the press once the base plate is pushed in all the way. This press can be used for t-shirts, hoodies, bags, sleeves, legs, bags, neck tags and a lot more. Works perfectly with all kinds of transfers from DTF to screen printed or vinyl.

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G2 are mainly used for heating hydraulic oil in containers in which the replacement of the heating cartridge without draining the medium must be possible. Ceramic heating cartridge in stainless steel tube ø 50mm, material-no. 1.4512 or material-no. 1.4404. G2″ thread SW70 welded from V2A. Terminal box made of PA6-GF30, impact-resistant and oil-resistant, degree of protection IP66/67. Unheated zone 50mm, surface load 1,5 W/cm², voltage 230/400 V. Special versions on request.

Complete ready to install heating mats, with or without spare heating cable, consisting of heating cable, cold lead and temperature sensors. Concrete floor heatings from Klöpper Therm are the optimum protection against dangers from black ice in cold stores. Concrete brings heat from outside into the cooling chamber. Thereby the temperature of the concrete along the heat flow falls to the temperature of the cooling chamber. The moisture stored in the warmer air condenses on the cold concrete surface through which black ice can form. Dangers through the exchange of warmer and colder air arise particularly in the area of locks. When, through repeated opening of the doors, condensation from the walls and ceilings falls on the floor and black ice forms, it can lead to accidents. In consequence of the effects of permanent cold, doors can freeze solid at the seals and be severely damaged.

Complete ready to install heating mats, with or without spare heating cable, consisting of heating cable and cold lead, length to customer specification, up to 180 m possible. Heating mats from Klöpper Therm work against the penetration of cold in to the ground and prevent upheaval of the ground and destruction of the foundations. Cold stores and cooling chambers give off cold to their environments. In the area of partly or fully sunk in the ground supports, foundations and floors the underlying soil receives the cold. If the natural heat flow from the environment and the earth is insufficient, the moisture in the ground freezes, expands and the ground is lifted. Depending on the nature of the ground, this may cause substantial damage to buildings. Frost heave protection in cold stores and cooling chambers is, therefore, an essential and a reliable preventative measure against frost damage and damp.

With our CNC-wire-laying technology is it very easy to integrate functions like heaters for Anti-Icing/De-Icing or surface sensors for detections of structural problems in carbon or glass fiber parts. We can manufacture dimensions up to 2500x8000mm.

Electric double heat press for textile transfers. ✔ Double platen ✔ Even temperature and pressure ✔ Opens and closes automatically ✔ Up to 40x50cm base plate ✔ No compressor ✔ Laser guides This fully electric double heat press is designed for medium size productions without compressed air. Due to its electric closing mechanism, it is easy to operate without exhausting your arm. And while one side is pressing, you have time to prepare the other for the next cycle. Furthermore, a small gap underneath the base plate allows you to thread the t-shirt onto the platen. Using a small display, you can adjust temperature and dwell time to your likings. In automatic mode, the machine will automatically close and open the press as well as move it from one platen to the other based on set timings. With a range of different base platens, this press can be used for t-shirts, hoodies, bags, sleeves, legs, bags, neck tags and a lot more.

To maintain constant temperature in your tank or container, we provide the appropriate heating system. This could e.g. be implemented by heating the container surface with heating cables for holding temperatures of up to 250 °C. Transportable electrical heating equipment, including circulation pumps, are also available for holding temperature of up to 80 °C.

Temperature controllers and temperature sensors from Klöpper Therm are used in all electric heating systems in which the temperatures of the heated areas must be reliably measured and controlled with precision.

HIGH-PERFORMANCE ELECTRIC HEATING UNIT TEH 400Powerful heating without flames, smoke or condensation: With the electric heating unit TEH 400 At present, this extraordinarily robust heating unit of German high-quality manufacturing is probably the world's most powerful mobile electric heating device on the market! You require extremely large-volume, fully smoke-, flame- and condensate-free amounts of warm air – for instance for blasting, coating and painting work or load tests? If so, the high-performance electric heating unit TEH 400 is our best recommendation: This hot air giant can withstand the harshest conditions whilst producing up to 9,000 cubic metres of hot air per hour at an air pressure of up to 600 Pa in continuous operation. Owing to this capacity, the high-performance heating device can transport hot air via air hose distances of up to 100 metres length.

We develop and manufacture electric heating components for air conditioners in train systems and shipbuilding as well as preheaters and braking resistors for the drive technology. In the field of separator technology, we manufacture heating elements for the temperature control of different liquids. In all areas we apply the highest standards of high voltage and insulation resistance.

Since the invention of the “Schniewindt grid” in 1902, we produce high voltage resistors and are thus among the pioneers in the electrical industry. Due to continuous development of our products and new developments according to the respective needs of the market, we are now one of the leading manufacturers of electric heating equipment, resistance equipment and sensors for current and voltage measurement

The visualising software UnIWIn allows the heating controllers UNIPLEX III to be clearly displayed and easily operated and offers access to the current state of heating circuits connected. Plants consisting of a number of individual electric heating systems can be configured as logical, procedural groups by the UnIWIn software. The system structure can be matched to these groups. For a perfect overview, all important heating circuit and system data, the state overview and a message archive with different sorting and selecting functions are permanently accessible on the processor.

Hazardous area radiators ATEX II 2 G/D EEx d IIC T6 ATEX The „FLR“ range of liquid filled, electrically heated radiators has been specifically designed for providing heating in zone 1 or 2 and zone 21 or 22 hazardous areas where airborne dust particles are of particular concern. Can be supplied with adjustable control thermostat.

Electric duct heater Electrical duct heater type “LEH-R” are intended for the heating of gaseous media. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The duct heaters essentially consist of the following main-components: Duct with adapters to flanges DIN EN 1092 Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box

Energy systems for industrial plants can sometimes be expensive to maintain. This is why we already pay attention to economic solutions during the planning and conception of your plant. Our heating and cooling systems are needs-based, individual solutions for seasonal and user-related requirements. Heat transfer media such as water, air or oils are heated by means of large-capacity water boilers, high-speed steam generators or thermal oil systems. In the heating systems from IFA Technology, the subsequent heat transfer takes place through half-tube coils welded onto the jacket, heat exchangers, heat transfer plates (thermoplates) or electrical heating cables.