Du-plate - Import export

We manufacture individual parts and assemblies according to drawings, data or samples. We have a wide range of profiles in different steel grades and aluminum in stock. Our machinery enables us high flexibility.

Anti-Friction Plain Bearings, self-lubricating

Plate Precoat Filter are used for the fine filtration of low-viscosity oils. This cost-effective filter is a compact device designed to supply individual machines. The achievable filtration fineness is between 1 and 5 µm in NAS 3-7. The filter regeneration and cleaning of the filter discs are done manually. Advantages: Small footprint Excellent filtration results Low installation effort The filter geometry can be customized to match the machining machine (on request) Affordable price Operating Principle: Swelling: The entire tank is filled with oil. Before filtration can begin, the filter discs (1) need to be swollen with a filter aid (diatomaceous earth, cellulose, perlite). Filtration: After the precoat, the operator manually switches to filtration and directs the filtrate into the clean tank (2). The system pump can now be switched on to supply the processing machine. The achievable filtration fineness is 1 – 5 µm, depending on the filter aid used.

Whenever pre-assembled cables need to be led into a housing, the cable entry system KADL is the perfect solution. KADL is installed with one click - easy and timesaving. The modular structure allows a step-by-step installation of 3 to 25 cables. With 16 different grommets a wide clamping range from 3 to 32,5 mm can be covered. - For applications where you need to insert and seal pre-assembled cables with connectors into housings - Tool-free entry and connecting technology for machines and equipment - Temperature range -30 °C to +100 °C - Protection grade IP65 - UL 514B - 12 different frame combinations with 16 sizes of grommets (accessory) - Click-in assembly at wall thickness from 1,5 - 2,0mm - For walls with thickness larger 2,0 mm the KADL can be fixed with standard screws

BEHRINGER vertical bandsaws are the perfect answer when it comes producing cuts in all plate dimensions and thicknesses with optimized contours and machining allowances. LPS bandsaws can be ideally tailored to meet your specific needs. The material table is structured using platform technology and can be variably equipped in 250 mm graduations with cover plates, liftable roller conveyor segments, recesses for crane loading on chains or measurement and clamping devices. Every machine is unique to its owner. The LPS vertical bandsaws are able to cut even materials with different machining properties with the utmost precision without compromising on speed. This is made possible by a durable design in combination with vibration-damping grey cast iron components. Saw feed is performed here by a ball screw with servo drive and the sensitive BEHRINGER cutting pressure control system.

Crane Plates with carry Loop All dimensions possible.

Where to use deva.tex ® deva.tex ® is a high performance self-lubricating sliding material with a glass fiber reinforced carrying layer. The machinable sliding layer consists of fibers which are embedded in epoxy resin. The resin carries PTFE as lubricant for excellent tribological performance. deva.tex ® bearings are available up to 1.000 mm and are characterized by a very high corrosion and wear resistance. They are insensitive to contamination as well as to vibrations and shock loads. In addition to standard dimension, special geometries can be machined. Max. possible outer diameter 1.000 mm Applications Water turbines, earth moving equipment, hydromechanical engineering equipment, agricultural machines, railroad applications, shut-off valves, chemical industry and many more. Structure 1. Sliding layer: reinforced polyethylene fibers embedded in epoxy resin and PTFE 2. Glass fiber reinforced carrier

grease lubricated

Design: Casing chrome nickel steel 18/10. Continuously adjustable temperature control from 30 – 90 °C by loosely attached ther mostat, with casing. 2 x GN 1/1 and 3 x GN 1/1 seperately adjustable.

This is the parts use in priter accessories, main suopprt bracket.

These accessories were made by copper, after CNC machined, then process brushing ,finally do the gold-plating .

Printing plates or paper stamping tools made from brass for print finishing. These plates give a high-quality packaging the corresponding gloss. For the quality of the printing plates and paper stamping tools, it is crucial that the data provided are assumed precisely. With our professional CNC engraving technology, stamp tools can be produced that are tailored to precisely your needs.

Are you aware of our finishing options for metal and aluminum test specimens? Chemical degreasing, deburring, grinding, turning, milling, punching or blasting – no problem. Upon request, test specimens can be customized and labeled with serial numbers. Contact us to find out how we can help you. By the way: we can manufacture test specimens for the TABER-ABRASER from all kinds of metals.

Temperation of fluids Pillow plates are used everywhere where liquids must be temperated. In dependence of application the liquids can be cooled or heated. Cause of this wide range of applications pillow plates are used in the process industry, in the cooling industry and in a lot of other industries. Pillow plates are also know as heat exchanger plates, evaporator plates, cooling plates /sheets and thermo plates / sheets. Pillow plates as air-/water-heat exchanger Additionally to the temperation of liquids pillow plates are also used as air-/liquid heat exchangers. In case of polluted or wasted air and if there are high demands for cleaning, more and more pillow plates are used as air-/water-heat exchanger. The large exchange surface and the good possibilities for cleaning are important features for this type of heat exchanger.

Macro Plate, Polystyrene, 6 Wells, F Shape, with Lid

Special FTJ filter fleeces are particularly suitable as precoat or support fleece on horizontal plate pressure filters or plate filters The following precoat agents are used: Diatomaceous earth Bleaching earth Cellulose Cornmeal The FTJ nonwovens Cora®Dot and Cora®Spun effect corresponding savings on precoat agents with extremely fine filtration.

GN 1/1 - GN 3/1. Surface chrome nickel steel. Ready to plug-in. Refrigerant: 600a. Adjustable from -5° to +15°C.

Accessory Profile KP09P: Pneumatic clamping plate for shaft clamping Selectable sizes of the compressed-air connection Easy mounting and retrofitting

Accessory for position indicator DA09S Profile KPL09: Contour matching with DA09S position indicator for shaft diameter 12 … 20 mm Robust zinc die-cast design Easy mounting and retrofitting

Accessory Profile KP09: KP09 for shaft diameters 8–20 mm Selectable sizes of the compressed-air connection Easy mounting and retrofitting

Profile KPE04: Contour matching with DE04, AP04 position indicators for shaft diameters 10 … 20 mm Lateral position of the clamping lever Easy mounting and retrofitting

Accessory for position indicator DA04 Profile KPL04: Contour matching with DA04 position indicator for shaft diameters 8 … 14 mm Robust zinc die-cast design Easy mounting and retrofitting

Accessory Profile KP04: KP04 for shaft diameters 8–15 mm Selectable clamp lever position Easy mounting and retrofitting

For widths from 200 to 500 mm Pass line height 850 to 1,200 mm the base systems can be simply married with the tslots of the belt body the Base System 51.2 is mounted on one side only and supports widths of up to 150 mm; due to its very large floor plate, one base is usually enough the Base System 53.1 is mounted left and right of the belt body and thus suitable for wide units; since the mounting feet are relatively small, two bases are recommended

the conveyor system TB1000 is suitable especially for the integration into complex machines (e.g. removal of scrap from punching machines) because of its compact design the aluminum extrusion framework resists twisting and at the same time features good load capacities under the running surface of the belt, a stainless steel plate is mounted to secure an enduring resistance to abrasion

Safe upending (90°) and rotating (180°) of coils Body design in solid welding construction with reinforced base with no pit or floor anchoring needed Body made of strong steel plates Base with large integrated floor plate and attached box construction to protect drive components Tilting unit with neatly welded half shell attachments and two reinforced coil tables welded at 90 degrees to provide safe material seating Bedding via four pressureresistant and fully enclosed bearings with lifetime lubrication Tilting shaft of highquality ductile steel with fully enclosed bearings Tilting drive via threephase motor and triplex type highstrength chain Rotating drive via welded surfacehardened sprocket, integrated in base Tilting function via initiator with arbitrary adjustable tilting point Electrical conrol in switch box with leftright selector switches and estop

Made of nickel-plated brass with union nut

Made of nickel-plated brass and plastic

KEIPER timing belt clamping plates can be made of many different materials, e.g. aluminum, steel or stainless steel. Keiper can produce them in all pitches and designed according to your specifications and drawings. This means that you will receive the optimal solution for the intended application and load. Our timing belt clamping plates work together optimally with our extensive and complete range of timing belts: in other words, a perfectly matched system for your requirements. We also have a large number of standard aluminum clamping plates on stock, which can be reworked according to your specifications (e.g. bores and mechanical processing based on drawings). Furthermore, such special surface coatings as hard coating, anodizing, zinc coating or bronzing improve the corrosion and wear resistance.