Dry walls - Import export

Sometimes, the load rests upon the shank of the fork during transport. In these cases, transported goods and the fork shank must be protected from damage. secutex forkshank protection with foam padding is designed for careful load transportation. The degree of compression of the foam is dependent upon the collision. The foam reforms after the stress has subsided. Usages include, e.g. transport of sensitive dry walls, roofing tiles, etc. The forkshank can be fastened with a steel belt to the back of the fork and can be easily exchanged.

It’s an efflorescence-reducing and waterpoofing sealant with a pearling effect, designd to permanently reduce the capillary water absorption of concrete block products. Can be successfully used for the production of all concrete components and concrete block products made of earth-moist concrete such as paving stones, slabs (pressed or cast), embankment stones, dry masonry wall systems, palisades, roof tiles and other products. - remarkabe protection against water absorption - strong water pearling effect - improved frost and freeze-thaw resistance - reduced tendency for efflorescence and greening - enhanced color brillance and color retention - higher durability

Owing to the fact the the TFV 10 S model is crafted of literally indestructible polythene, it is extremely easy to operate and lightweight yet it is rigid enough to withstand the wear and tear of daily use. Adding to this, it consists of parts that are all crafted from metal, which not only assures that the turbo fans are purposed to cater to the challenges that are daily put forward on them, but also proves that they are built for long service life. The TFV 10 S can perform at several angles such as 0°, 45°, 90°, which shows that the turbo fans are are extremely versatile and hence are perfectly suited for requirements such as plaster, screed, cavity drying, carpet, maintenance cleaning, floor drying, ventilation of seep surfaces in office spaces, bowling alleys and gyms, ceiling and wall drying and particularly wooden beams.

INFRARED HEATING PANEL TIH 500 SFlexibly usable flat heating panel for wall drying, effective spot heating or as a decorative heating element We strongly recommend using the infrared heating panel TIH 500 S when conventional air heaters have reached their limits for process-related reasons, when rooms without a heating are to be equipped with an effective heat source without costly modifications, or when you want to provide additional cosy warmth in your own four walls in a targeted and cost-effective manner. For while classical heating devices work with convection heat, which means that they use the ambient air as heat transfer medium, heat it up and distribute it in the room, the heating panel TIH 500 S generates direct heat by means of infrared radiation without convective loss and thus works on the same principle as the sun. This functional principle provides manifold possibilities of use for the infrared heating panel TIH 500 S:

- Lockable valuables compartment with slot, available with open storage shelf - Open compartment for turnout gear readily accessible and properly stored - Helmet compartment with perforated base allows for quicker drying of helmets - Prepared for wall assembly easy to anchor and align Helmet compartment: Thanks to the cut-out at the rear of the helmet compartment, the neck protector can be stored properly, without buckling. The recessed shelf makes it easier to store large helmets. Ventilation holes allow for quick drying. Metal hooks: There are 2 sturdy material hooks located on the side of the compartment. The position can be changed according to your needs; further hooks can be added. The clothes rail made of oval profile is fitted with metal hooks. These are both non-twisting and non-tilting. Variants: - number of compartments: 1; 2; 3 - compartment width: 40 cm; 50 cm - great variaty of colours - different locks

INFRARED HEATING PANEL TIH 700 SFlexibly usable flat heating panel for wall drying, effective spot heating or as a decorative heating element We strongly recommend using the infrared heating panel TIH 700 S when conventional air heaters have reached their limits for process-related reasons, when rooms without a heating are to be equipped with an effective heat source without costly modifications, or when you want to provide additional cosy warmth in your own four walls in a targeted and cost-effective manner. For while classical heating devices work with convection heat, which means that they use the ambient air as heat transfer medium, heat it up and distribute it in the room, the heating panel TIH 700 S generates direct heat by means of infrared radiation without convective loss and thus works on the same principle as the sun. This functional principle provides manifold possibilities of use for the infrared heating panel TIH 700 S:

Spray walls and spray booths with dry separation via cartons. For lower utilisation times or overspray quantities RES dry spray booth For lower utilisation times or smaller overspray quantities, spray systems with dry separation offer a meaningful alternative to water-sprinkled systems. The Rippert modular spraying system type RES enables individual adaptation to the respective case of need. The filter system of the RES dry spray wall consists of individual square cardboard boxes. A sheet metal frame serves as a support structure for the filter box. In order to save costs, there is a possibility to vary the individual filter boxes in the spray booth, without exchanging all of the filter elements. Function The overspray is caught by the exhaust air stream and fed to the filter. The solids are filtered out here, while the cleaned exhaust air is blown out into the open air by the fan. Versions The basic version consists of a wall with a two-fold filter stage. Paper filter boxes form the first filter stage. A glass fibre fine filter arranged directly behind it represents the second filter stage. The attached radial fan is equipped with spark protection in the suction nozzle as well as an explosion-proof motor. The spray booth can additionally be equipped with removable or fixed side and ceiling panels. The RES dry spray booth is available in galvanised sheet metal or in stainless steel. Advantages Cleaning / maintenance The spray wall is designed such that the filter elements can be exchanged with little effort in a very short time. Once it is saturated, the filter box is removed from the sheet metal frame and disposed of in an environmentally-friendly manner.

Standard advantages: RTS-Rotation – low-maintenance dry spray booth Overspray dry separation demonstrates its strengths in practice above all when relatively large quantities of paint have to be processed and the overspray portion cannot be reduced any further. Spray booth with dry separation are usually equipped with disposable filters or manually regenerative filters. These cause costs for spare filters, maintenance and disposal. In addition to that, operation has to be interrupted in order to exchange the filters. The ‘RTS rotation’ system was developed by Rippert in order to reduce these costs and tooling times. Maintenance intervals and filter service lives are prolonged significantly in comparison with conventional systems due to the new brush pre-filtration. How the ‘RTS-Rotation’ system works Overspray separation in the RTS-Rotation system takes place by means of a pre-filter and a fine filter stage. The pre-filter stage is formed by vertical, slowly rotating brush rollers. The bristles present a very large total surface area and absorb the adhesive particles from the overspray. During the slow rotation, the paint particles can dry on the tips of the bristles. This results in slowly growing cakings on the bristles. Scrapers are mounted in the area behind the brush rollers that continuously remove these cakings from the bristles. The dislodged, hardened material falls into the drawers arranged under the brushes and can thus be simply disposed of. The dry paint dust may often be disposed of as ‘commercial waste’. The brushes otherwise require little maintenance and do not need to be exchanged or renewed. The fine filter stage is formed by a special fleece filter, which is arranged above the brush rollers and must be manually maintained or exchanged in the standard version. The maintenance intervals depend on the paint material used. Automatic cleaning or an external fine filter with automatic cleaning is also possible as an option. Over 10 years of operational experience shows that around 75 to 95% of the overspray is separated out by the pre-filter stage and the rest by the fine filter stage. The degree of separation depends strongly on the type of paint and the drying reactivity during the flying phase. Use of the RTS-Rotation with the following paints Before practical use, the paints are tested and approved in Rippert’s own pilot plant. Stove enamels and 100% UV paint systems cannot be used. The horizontal version Furthermore, it is possible to use the system as a horizontal underfloor extraction system. This version is used, for example, by a machine manufacturer for large parts. In addition, a drag conveyor with gulley extraction is used there in order to automatically transport the particles cleaned off the brushes out of the pit. Conclusion The RTS-Rotation system is particularly useful when relatively large quantities of paint with an unavoidable overspray portion have to be processed, as otherwise a great deal of residual waste would result using conventional technology. Compared to water-sprinkled spray walls and normal dry spray booths the amortisation period is shorter; it is frequently less than two years.

SANHA-Box for dry-wall construction, with two bath and shower connections

Wash basin mounting for dry-wall construction, for loads of up to 150 kg, with markings for 180 mm and 280 mm axial distance

SANHA-Box for dry-wall construction, sink connection

SANHA-Box for dry-wall construction, radiator installation. The SANHA-Box greatly reduces labour in dry-lining applications. Cavities, noise insulation or stability are real challenges. The SANHA-Box allows robust and very precise installation of all pipes, fittings, etc. including mounting frames and cross-members

Prefabricated time-saving SANHA-Box for dry-wall construction, bath and shower connections. With sound insulation.

Fully preconfigured time-saving SANHA installation box for dry-wall construction, with two sink connections, for dry masonry walls. Integrated sound insulation and condensate protection.

Prefabricated time-saving SANHA-Box for dry-wall construction, bath and shower connections. With sound insulation.

Moulding type H70/50 1,000 x 70 x 50 mm (LxWxH) Concave Moulding type H70/50 is ideal for transitions to tiles and dry walling with adjustment screws.

Moulding type H100/50 1,000 x 100 x 50 mm (LxWxH) Concave Moulding type H100/50 is ideal for use with dry walling with adjustment screws and in all hygiene areas.

Pre-configured foam insulated installation box 25-WL-WT-T for wash basins, for use in dry wall constructions. The box provides thermal insulation and condensate protection through its foam body. With two female threads Rp 1/2 and two MultiFit®-Flex (multilayer pipe) system pipe connections 16 mm as well as drainage connection 50 mm. Overall dimension: 200 x 350 / 40 x 70 mm (Length x width w/o plate/width with plate x depth).