Dry safe - Import export

The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * service-friendly and easy to dismantle * The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

The Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times and thus saves important resources. * Infinitely variable speed controller for the transfer and filling of small quantities * Sealless design (DL) conditionally safe to run dry * continuously adjustable * powerful Motor with improved service life * service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.The max. delivery head also depends on the pump design, motor and fluid.‌

The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * Service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * Service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

for liquid lubricants and cleaning agents The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * Service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

Basalt fiber-reinforced, water-based, non-organic, non-combustible ready-to-use filler for various applications in shipbuilding and architecture, including for the modeling and production of spatial constructions. - 100% natural origin — inorganic and antibacterial — non-combustible — no smoke or fuses in case of fire — high temperature resistant (after drying) — safe for people and environment — high adhesive properties — moisture-resistant — water resistant after special treatment of the finished product

Low-viscosity, water based, one-component non-combustible adhesive with endothermic effect, made of natural components, mainly rock formations and basalt microfiber. Cerammatrix 01-50 is used to bond products made of mineral fibers (basalt, carbon, glass) as well as mineral wool and/or metals. — 100% natural origin — inorganic and antibacterial — non-combustible — no smoke or fuses in case of fire — high temperature resistant (after drying) — safe for people and environment — high adhesive properties — moisture-resistant — water resistant after special treatment of the finished product

Low-viscosity, water based, one-component non-combustible adhesive with endothermic effect, made of natural components, mainly rock formations and basalt microfiber. Cerammatrix 01-50 is used to bond products made of mineral fibers (basalt, carbon, glass) as well as mineral wool and/or metals. — 100% natural origin — inorganic and antibacterial — non-combustible — no smoke or fuses in case of fire — high temperature resistant (after drying) — safe for people and environment — high adhesive properties — moisture-resistant — water resistant after special treatment of the finished product

Water-based one-component fire protection impregnation for wood and wood products and building elements with antibacterial and fungicidal properties for interior and exterior use — antibacterial, with fungicidal effect — inorganic — non-combustible — non-toxic — temperature resistant (after drying out) — environmentally safe — high adhesive properties

The Eisele construction and sewage pumps BS-BSD-BSG are self-priming rotary pumps. More detailed key data here: Dry self priming - dry-running safe - sucks without auxiliary fluids Sealing of the shaft using highly wear resisting mechanical seal Blockage-free due to open impellers - non-sensitive for the use on construction sites, in the municipal and industrial sectors Mobile or on carriages with three-phased motors of 3.0 / 5.5 / 11.0 kW With diesel engines 3.0 / 6.5 / 12.5 / 22.0 kW output up to 234 m³/h For PTO-drives 15 - 40 kW Output up to 360 m³/h The Eisele construction and sewage pumps BS-BSD-BSG are self-priming rotary pumps. Areas of application are, next to industrial and handicraft businesses, also in ship construction and for emergency services. They are suitable for draining ponds, shafts and construction pits as well as for ground water lowerings, or for pumping waste water.

Eisele vertical pumps have proved themselves thousands of times and are superior in quality and performance. Key data: Forced supply through the screw impeller Inlet nozzle and screw impeller with special hard-faced welding Similar method of working as with a shredding machine Absolutely dry-running safe Highly wear resistant mechanical seal, oil bath lubricated With / without mixing nozzle Can be rotated by 235° VM: with three-phased motor that can be overloaded 11.0 / 15.0 / 18.5 / 22.0 kW with conveying capacity up to 6,000 l/min VG: with EISELE angular gear for tractor drive und conveying capacity up to 12,000 l/min Eisele vertical pumps have proved themselves thousands of times and are superior in quality and performance. Many different application possibilities can be perceived with the high-performance pumps.

The T Pump Series is particularly suitable if containers or dipping baths cannot be flange connected to the side or if dry run in the plant cannot be excluded. Materials: PVDF (polyvinylidene fl uoride) or PP (polypropylene) Immersion depth: 200 - 800 mm Max. output rate: 280 l/min Max. discharge head: 28 m Motor power: 0.18 - 5.5 kW Advantages: » absolutely dry run safe (no contact of mechanical parts) » highest chemical resistance » robust, thick-walled design » long-lasting and abrasion-free » design for the operation under demanding conditions » open impeller (i.e. solids up to 3 mm grain size and 10 Vol. % possible) » no abrasion into the medium to be pumped (high purity applications) » no metal parts are in contact with the medium » easy to maintain » universally applicable, quiet and compact » various chemical resistant materials can be supplied from the warehouse