Distribution - Import export

The 8B standard manifolds in various designs and materials. Due to the special design, several manifolds can be easily connected in series. Depending on the application, the media can be either distributed directly or shut off as required using the appropriate fittings.

The Gronemeyer synchronized switch divides the stream of products batch-by-batch and gently into several lanes. During the distribution process the products are not braked, so that functional reliability is ensured even at high speeds. Because the number and width of the lanes to be approached can be freely selected, the machine is suitable as product feed for palletizing machines or similar devices. Technical data: —Distribution: Number of lanes depends on the recipe —Distribution process during continuous flow of materials —Product gap: from 15 mm —Conveyor speed: more than 60 m/min. —Lane distance: depends on recipe —Complete machine cover made of Makrolon with maintenance doors —Independent electrical control system with congestion monitoring Optional equipment: —Loading and unloading belts —Infinitely variable width adjustment

The Gronemeyer switch divides the stream of products into two or more lanes during continuous operation or in cycle operation. You can select either a pneumatic or an electrical drive. The pneumatic drive is characterized by a good price-performance ratio. The electrical drive allows you to divide the stream of products into more than two lanes. Technical data: —Distribution: 2 lanes —Distribution process in cycle operation —Lane distance: up to 250 mm —Pneumatic drive Optional equipment: —Independent electrical control system with congestion monitoring —Loading and unloading belts —Infinitely variable width adjustment —Combination with gripper technology for distribution during continuous operation —Electrical drive for distribution to multiple lanes —Complete machine cover made of Makrolon with maintenance doors

Energy column/energy bollard EST24 for outdoor use on a foundation created on site. The case is made of brushed stainless steel. The sockets are integrated in a plastic housing, protected with FI/LS and fully wired. The energy column can be locked with a profile half cylinder. The degree of protection of the electrical units is IP44. Optional interior lighting selectable. Other equipment variants on request.

Air flow routing tubes are designed to channel different kinds of air to appropriate destinations. If you have a specialized vehicle and need superior flexibility in your air duct tubing, these products lead the industry. CARADUCT® flexible tubes are multi-layer, grooved tubes that are wound from a combination of aluminum and paper layers. They possess a particularly high crushing strength and have very good insulation properties. Through high flexibility and small bending radii, they offer good space usage, particularly when laying out in corners. Dükerrohr is a twin flexible tube distinguished by a particularly high insulation effectiveness to reduce temperature drops in the warm air ducting. Since it is installed outside of the vehicle, it carries additional protection against water and oil splashes.

Clinical data shows the impressive potential of Delphinol® in regard to a healthy glucose metabolism after the consumption of dietary carbohydrates or refined sugars. In addition, Delphinol® significantly lowered glycated haemoglobin levels (HbA1c) and improved the blood lipid profile in a three-month clinical trial. Unique Features - Natural absorption delay of dietary carbohydrates, including refined sugars and pure glucose - Prevention of glucose peaks due to balanced blood sugar levels - Maintenance of blood sugar levels within normal range Quality Delphinol® is manufactured from selected fresh maqui berries under strict GMP conditions. The extract is standardised to bear a minimum of 25 % delphinidins and a minimum of 35 % total anthocyanins. Delphinol® shows clinically proven bioavailability of key active ingredients.

System measuring the lateral distribution of Rauch Landmaschinen fertilizer disc spreaders

Radar Sensor measuring Spray quality signature for industrial applications

Radar material flow sensor for pipes and hoses

Distribution and line cables are used in broadband communication networks. Longitudinally welded high-purity copper tubes ensure optimum immunity to interference radiation as well as high stability. Made in Germany quality. They are used for signal transmission between head-end station and house connection. They can also be used in public broadband communication networks or underground installation.

Distribution and line cables are used in broadband communication networks. Longitudinally welded high-purity copper tubes ensure optimum immunity to interference radiation as well as high stability. Made in Germany quality. They are used for signal transmission between head-end station and house connection. They can also be used in public broadband communication networks or underground installation.

Distribution and line cables are used in broadband communication networks. Longitudinally welded high-purity copper tubes ensure optimum immunity to interference radiation as well as high stability. Made in Germany quality. They are used for signal transmission between head-end station and house connection. They can also be used in public broadband communication networks or underground installation.

Distribution and line cables are used in broadband communication networks. Longitudinally welded high-purity copper tubes ensure optimum immunity to interference radiation as well as high stability. Made in Germany quality. They are used for signal transmission between head-end station and house connection. They can also be used in public broadband communication networks or underground installation.

Distribution and line cables are used in broadband communication networks. Longitudinally welded high-purity copper tubes ensure optimum immunity to interference radiation as well as high stability. Made in Germany quality. They are used for signal transmission between head-end station and house connection. They can also be used in public broadband communication networks or underground installation.

Distribution and line cables are used in broadband communication networks. Longitudinally welded high-purity copper tubes ensure optimum immunity to interference radiation as well as high stability. Made in Germany quality. They are used for signal transmission between head-end station and house connection. They can also be used in public broadband communication networks or underground installation.

Distribution and line cables are used in broadband communication networks. Longitudinally welded high-purity copper tubes ensure optimum immunity to interference radiation as well as high stability. Made in Germany quality. They are used for signal transmission between head-end station and house connection. They can also be used in public broadband communication networks or underground installation.

Distribution and line cables are used in broadband communication networks. Longitudinally welded high-purity copper tubes ensure optimum immunity to interference radiation as well as high stability. Made in Germany quality. They are used for signal transmission between head-end station and house connection. They can also be used in public broadband communication networks or underground installation.

As a load distribution panel for the Optigrun system solution "Public Roof with Inspection Chamber". Including Optigrün Water Retention Box WRB 95 with corresponding cut-out.

AVUSE-1 for degassing under pressure, AVUSE-3 for degassing, high flow rate air inlet and outlet. Simple but studied design – To reach the best performances with optimized components. Ventilation area protected – From splashes and clogging thanks to a specific deflector design, ensuring a long term operation. Polymeric high-quality material. Easy maintenance – Thanks to quick removal of the clamps and drainage cock.

The AWALIFT 1/2 penta offers lots of power while requiring very little space. The system is installed directly at the shaft wall; this configuration significantly reduces the required shaft diameter. In addition, the 1/2 penta offers our trusted separator system. The use of two pumps ensures a high level of operational reliability. Large system capacity despite small space requirements: The system is set up directly at the shaft wall This makes a small shaft diameter possible Larger buildings, industrial companies, individual streets Facilities that cannot be drained using natural gradient As protection from backwater damage Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features One tank with two separator systems Two centrifugal pumps and motors according to type and operating location required Four pump gate valves Two non-return valves AWASTOP DN 100 K Y-pipe DN 100 Two pressure pipe gate valves DN 100

BORSIG offers attractive process solutions for various gas separation applications in the fields of oil and gas production or refinery and process technology, such as BORSIG Hydrogen separation and BORSIG Fuel gas conditioning. This covers the treatment of gas streams for conditioning raw gas flows, recovery of specific components and the improvement of product quality to comply with customer gas specifications. Process concepts can be developed in addition to existing processes or as an alternative to conventional process solutions.

Positive displacement blowers and single-stage screw compressors start up directly or following a star delta circuit if no gentle start or no frequency converter control are available. The unit is subjected to heavy mechanical load and requires high start-up current. For this reason, counterpressure must be reduced during the start-up phase; this is achieved by blowing off the increasing volume flow. The fully automatic medium-controlled STRATE relief valve EVA has been specially designed for this procedure. As well as not requiring any maintenance, the STRATE relief valve EVA is an extremely economical device for reducing load during start-up since there is no longer any need to use complex externally controlled valves or electronic start-up aids. Product features Fully automatic control Specialized material G-AISi9Cu3 - specific to the requirements With solenoid valve for different motor speeds With overpressure valve For higher pressures and temperatures

The special lightweight aluminium design and silicone inserts of STRATE sandwich non-return valves SB makes them ideal for: Conveying air and gases up to temperatures of 200 °C Working pressures up to 4 bar Special applications with other valve insert materials on request

Pre-fabricated STRATE AWASTATION service buildings are set up directly on top of shafts (STRATE AWALIFTSCHACHT) or optionally alongside shafts on concrete foundation blocks. Pre-fabricated solutions offer the possibility of housing system components e.g. shaft cabinets, control elements, electric systems and service connection so that they are easily accessible integrating further optional system components e.g. STRATE AWAaerob ventilation systems, operating data recording and remote transmission etc. One-piece pre-fabricated concrete building, suitable for road and crane transport with four threaded attachment and transport sleeves Re-siting of the service building is possible Inside walls: exposed concrete, painted with washable dispersion paint, colour according to customer wishes Outside walls: textured render, painted in colour according to customer wishes Floor: smooth concrete floor plate with openings for shaft cover, cable duct etc.

STRATE valve shafts are used in industrial and municipal areas. The different design sizes of the STRATE AWALIFT valve shafts allow the optimum size to be assigned to every individual purpose. Pipe and cable ducts, which are located exactly according to customer specifications in the manufacturing plant, meet all requirements for an exact fit, safety and ease of maintenance. Optimum, safe installation locations for valves and system components whose size allows them to be housed in a shaft Are excellently suitable as inspection shafts with flushing connection, as feeding points for AWAaerob ventilation systems, for ventilation and bleeding valves, for pig traps etc. Are made of high-quality, durable and waterproof materials with a high material strength and low material weight, with the design permitting short installation times and excluding complex

Purging the pipe Product features Preferred use in systems which allow the economic emptying or partial emptying of the pressure pipe or in systems into which sewage is not discharged all year round, making emptying of the pressure pipe sensible e.g. on campsites (high/low season) For systems where high and low points are not very pronounced Can be used when small air pockets can be present in the pressure pipe without affecting the pumping capacity or the pressure pipe itself An accompanying pipe is not required

The STRATE AWAaerob 110 - 1700 ventilation system consists of an oil-free compressor with noise suppressor, a switching system with operating hours counter and a timer, as well as a complete connection fittings set with manometer, check valve and connection line. The ventilation quantity and duration are adjusted by the timer based on the compressor run time. Fine pearls of oxygen are injected from the air. Ideal for short pressure pipes and high flow speeds in the pressure pipe Area of application for pressure pipes <= DN 200 Use with or without accompanying pipe (depending on the high and low points in the pressure pipe)

The BEV-G is a single-stage valve offering only the function of the first ventilation stage (coarse ventilation) provided by the two-stage valve (BEV-GF). It is not necessary to coordinate the valve to the working pressure in the first ventilation stage, since coarse ventilation is always closed under pressure. Type G (coarse ventilation): The air escapes through this valve until the medium closes it as it continues to flow. The valve remains closed under operating pressure. Ventilation of individual sections in sloped pressure lines, especially as a low pressure safety feature Quick ventilation of high points if fine ventilation is not required (short pump run times)

The BEV-F is a single-stage valve offering only the function of the second ventilation stage (fine ventilation) provided by the two-stage valve (BEV-GF). For ventilation quantities of 20 to 40 m3/h. Specific applications include high points which are under hydrostatic pressure even when the pump is shut down due to the height variation involved, and where no coarse ventilation is required, as well as at high points with low flow quantities. Type F (fine ventilation): Air escapes through this valve, and collected gases cause it to open once again, including under operating pressure, until the medium continues to flow and close the valve again. Installed at high points which are under hydrostatic pressure even when the pump is shut down due to the height variation involved, and where no coarse ventilation is required. Installed at high points of pressure lines with low flow quantities.