Devices - Import export

Measuring groove widths for selecting locking ring classes

To sustain the high degree of camera performance, we expanded our portfolio by adding components and devices that facilitate a more holistic system assembly. All of our standard accessories are tested and verified for quality, fit, and performance. These are comple mented by task orientated, specialized components for multi-camera aggregation, signal multiplexing, synchronization, and the interconnection with various processing hosts. For embedded applications, compact computing solutions with dedicated carrier boards complete the system configuration

Raised access floor box 9912T with a device carrier, frame and removable lid made of solid aluminum anodized in natural aluminum. The housing is made of sendzimir galvanized sheet steel. A covering 8 mm thick can be embedded in the lid. Further equipment variants on request.

The multipurpose digital indicator TRANS CAL 7281 can be used wherever there is a need to perform high-precision, in-situ calibrations of sensing components used in equipment such as presses, torque tools or pressure-regulating systems. An optional factory calibration certificate or German-accredited DKD/DAkkS calibration certificate can be provided when the measurement device needs to be used as a reference. This provides a quick and cost-effective way of assessing a system with traceable documentation of measurement results. If a reference measurement cannot be made because the sensor location is difficult to access, it is still possible to test the zero point, the input, output and isolation resistance as well as the calibrating offset of the fitted sensor. It is also possible to check the indicating device by measuring the excitation voltage and simulating the characteristic values (mV/V or V) of the sensor used.

The L-10 series has our smallest and most compact hydraulic drive with helical gearing. With its extremely high axial load capacity in a slim, cylindrical design with flange mounting and drive, the ultra-compact L-10 series is ideal for applications with limited space. Helac’s sliding spline hydraulic technology with helical gearing is not self-locking and offers both high impact resistance and high holding torque for demanding applications. The L-10 series functions as a rotating device as well as a mounting bracket and support structure, so that no external bearing systems, brakes or locking devices are required. Available in five standard sizes with an output torque of up to 2,825 Nm at 210 bar.

Based on a individual needs assessment we tailor-make briquetting solutions including peripheral devices. RUF lifting and tilting devices optimize and automatize the flow of bulk materials. RUF can consider any individual customer needs.

They are the accessories used in electronic panel control,after processing for a variety of color surface treatment.

CNC machining parts, CNC turning parts, CNC milling parts,Aluminium Housing, Flange, Valve Seat, Bush, Sleeve, Mechanical Parts for electronic devices,Mechanical Engineering Service, stamping parts, sheet metal parts, Cnc machining parts from China, Anodized Aluminium Milling part, Stainless Steel shaft, Titanium mechanical parts, Aluminium Enclosure, Aluminium turned lens in black anodize finish,stainless steel valve, copper machined plate, brass bush, brass sleeve, brass nut in nickel plated,copper screws, red anodized aluminium holder, blue anodized aluminium CNC milling plate, anodized mechanical parts, copper gold plating handle, zinc plated screws, custom made CNC turned part,ShenZhen mechanical parts supplier, critical cnc machining parts, precision mechanical parts, mechanical parts for camera, Stainless steel high polishing part, pump and valve mechanical accessories, Optic mechanical products, High quality precision machining parts, Nitrating steel shaft,machined mechanical p

All around eciency is provided by the use of pre-assembled fastening systems; fewer part types, lessened assembly costs, and mimimized supplier base are just a few of the many reasons the trend is in pre-fabricated components. Depending on the application, manufacturers can use dierent materials and take advantage of detachable or permanent captive fastening systems. Features and benefits : -Assembly costs and times are reduced -Mimimized part diversity -High level of assembly reliability -Decreased efforts in assembly -Eliminate lost parts -High load capacity -Integrated tolerance compensation -Minimized supplier base for effectiveprocurement and decreased logistic costs -Removal of thread-cutting and self-tappingscrew combinations -Omission of incorrect product usageand assembly errors -Effortless disassembly and reassembly Advantages : -RELIABILITY OF ASSEMBLY -INTEGRATED TOLERANCE COMPENSATION -ALLOWANCE OF COMPACT DESIGNS - HIGH LOAD CAPACITY

Features • Quick processing with mounting pliers (can also be mounted without) • For shallow cavity depths • Wall plug cap with anti-rotation lock prevents rotation in the building material • Suitable for single and double layer wall panels Description & Area of Application • Galvanised metal cavity wall plug with wall plug cap, rotation locks and metric screw with hexagonal (SW13) or crosshead driver • When the wall plug is put in place, the expansion segments are widespread on the rear of the panel • Fire resistant to DIN 4102 (class A1)

With this anemometer ANE8903 you can measure both the wind speed and the ambient temperature.

The N480D-RRR is an efficient PID-temperature controller with an excellent price-performance ratio.

The N480D-RRR is an efficient PID-temperature controller with an excellent price-performance ratio.

Features • Tension- and pressure-resistant fastening • No backing or wedging of the frame necessary • Corrosion protection due to aluminium-zinc coating • Fire resistant to DIN 4102 (class A1) Description & Area of Application • Galvanized metal frame wall plug, pre-assembled with metric countersunk screw M6 (driver PZ3) • Fire resistant to DIN 4102 (class A1) • Tension- and pressure-resistant fastening • Tightening the screw pulls the cone into the sleeve and spreads it open

Universal PID temperature controller with two separate programmable control outputs for applications with simultaneously active cooling and heating cycles. With auto tune, 5 alarm functions and ramp and soak program (up to 180 time segments).

Features • All-purpose for almost all building materials • Approved by the building authorities • Also approved for the fastening of ceiling substructures • 70 mm anchoring depth for secure hold in perforated brick • Fire resistance class R90 (in concrete) • Optimised spreading geometry • Can be processed down to -20°C • Also suitable for natural stone with dense structure • Countersunk screw with internal driver TX40 for flush installations Description & Area of Application • 2-way split spreader element with rotation lock • For fastening facade and roof substructures, doors, windows, etc. • The Fassad is supplied as a fastening kit with screw

Features • Heavy-duty spacer installation for ETICS, clinker or on flat roofs • Aqua-Stop effectively protects against rotting of the facade due to moisture • Stainless steel prevents unsightly rust stains • Approved by the building authorities • Practically no energy loss • Simple and rapid installation • Smoothly adjustable insulating sleeve Iso Spacer • Suitable for insulation thicknesses and spacer installations up to 200/300 mm Description & Area of Application Thermo Proof is a heavy-duty spaced mounting system for thermally-insulated facades (ETICS) consisting of: • Iso Spacer with large contact surface and SW24 driver for better force transmission • Aqua-Stop special sealant for exterior use; incl. dosing tip; content 80ml; transparent colour • Steel parts made of stainless steel in A4 quality; M12 thread; length 300/400 mm • Static mixer extension for deep drill holes

Temperature range: -100 °C to +260 °C continuous Wire type: Teflon with CU shielding, Tmax: +200 °C continuous

Dymax MD® 1040M is a versatile autoclave resistant adhesive, coating and encapsulant resistant to numerous cycles of sterilization. Features: -STERRAD and autoclave resistant of 100+ cycles, including nonyellowing - Low water absorption 0.5% - UV/Broad Spectrum and LED curable at 365nm - Compliant with ISO 109935 Cytotoxicity - IBOA free (a known skin irritant) - Compliant with RoHS directives 2015/863/EU - Solvent free

automatic spray guns for precise coating and various application areas

large portfolio for the internal coating of cans and tubes

The sampling set SteriPlast® Kit consists of ten sample spatulas or ten sample scoops and ten SteriBag Premium tamper-proof sample bags. Thus the SteriPlast® Kit is the ideal combination for sampling where purity and sterility is essential. All parts are sterilised by gamma rays and suitable for use with foodstuffs. The scoops or spatulas are clean room manufactured and individually packed. The sample bag SteriBag Premium has an integrated sealing and is liquid-tight. A unique tracking code on both the bag and the tear-off field guarantees complete documentation and traceability. SteriPlast® Kit including scoop 50 ml or spatula 150 mm insertion depth, and SteriBag Premium 300 ml.

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point is hot junction insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. Sheathing thermocouples are freely flexible across their entire length. That means the thermocouple can be integrated in the installation point. The temperature to be measured can therefore be registered near the desired measuring point. A possible connection lead permits simple routing up to the measured-data acquisition. Options are available for the element diameter, element and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +1.100 °C, continuous, depending on selected sheathing diameter and measuring medium or atmosphere Wire type: Teflon with CU shielding, Tmax: +200 °C continuous

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point is hot junction insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. Sheathing thermocouples are freely flexible across their entire length. That means the thermocouple can be integrated in the installation point. The temperature to be measured can therefore be registered near the desired measuring point. A possible connection lead permits simple routing up to the measured-data acquisition. Options are available for the element diameter, element and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +1.100 °C, continuous, depending on selected sheathing diameter and measuring medium or atmosphere

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point comes insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. The connection lead permits simple routing up to the measured-data acquisition. Options are available for the probe diameter and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +550 °C, continuous Wire type: Fibreglass with VA braid, Tmax: +450 °C, continuous

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point comes insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. The connection lead permits simple routing up to the measured-data acquisition. Options are available for the probe diameter and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +260 °C, continuous Wire type: Teflon with CU shielding, Tmax: +200 °C, continuous

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point comes insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. The connection lead permits simple routing up to the measured-data acquisition. Options are available for the probe diameter and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +260 °C, continuous Wire type: Teflon with CU shielding, Tmax: +200 °C, continuous

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point comes insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. The connection lead permits simple routing up to the measured-data acquisition. Options are available for the probe diameter and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +1.100 °C, continuous, depending on selected sheathing diameter and measuring medium or atmosphere Wire type: Teflon with CU shielding, Tmax: +200 °C, continuous

This self-adhesive thermocouple is ideal for surface temperature measurements. For both curved and flat objects. The extremely thin wire, not even 1 mm in diameter, facilitates highly flexible installation. The thin probe tip guarantees very rapid response. Temperature range: -100 °C to +150 °C continuous, +260 °C short-duration Adhesive foil: Kapton, approx. 9 x 20 mm