Designing equipment - Import export

Cost-efficient transport between floors The vehicle lift CARRICO is an interesting alternative to the TRAFFICO when lower lifting heights and less frequent use are needed. The CARRICO has been type-tested in accordance with the EU Machinery Directive 2006/42/EC. The conveying speed is limited to 0.15 m/s. Furthermore, this car lift is delivered with automatic sliding doors and cabin equipment designed for the transport of vehicles and passengers. Functions of the components Door type: automatic sliding door (depending on the cabin width - 4- or 6-leaf) Entrances: front only / through Control: Control unit with micro-processor with extensive control functions Drive: Submersible hydraulic unit incl. screw spindle pump Advantages Saves on construction space as no ramp required Especially suitable for narrow shafts Cost-effective way to transport cars Easy to operate, manual hinged doors

BPL-055-D18V - battery hydraulic crimping tool, 55 kN, CU185mm²1 for exchangeable dies series "60-H", "5" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPE-055-D18V - battery hydraulic crimping tool, 55 kN, CU185mm² for exchangeable dies series "60-H", "5" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPL-062-D18V - battery hydraulic crimping tool, 62 kN, CU300mm² for exchangeable dies series "60-CK", "22" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPE-130-D18V - battery hydraulic crimping tool, 130 kN, CU300mm² for exchangeable dies series "130-C", "22" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPP-1301-D18V - battery hydraulic crimping tool, 130 kN, CU300mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 26 mm Battery: 18V/5Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPE-035-D18V - battery hydraulic crimping tool, 35 kN, CU150mm² for exchangeable dies series "35", "4" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPP-1303-D18V - battery hydraulic crimping tool, 130 kN, CU400mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 38 mm Battery: 18V/5Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPP-1302-D18V - battery hydraulic crimping tool, 130 kN, CU400mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 32 mm Battery: 18V/5Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPE-062-D18V - battery hydraulic crimping tool, 62 kN, CU300mm² for exchangeable dies series "60-CK", "22" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPL-035-D18V - battery hydraulic crimping tool, 35 kN, CU150mm²1 for exchangeable dies series "35", "4" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

METAL SEPARATOR FOR THE PHARMACEUTICAL INDUSTRY FOR THE INSPECTION OF TABLETS AND CAPSULES. Detects and separates all metals encapsulated or as loose parts. Meets the highest h ygiene requirements. Fast decontamination of all product touching parts without tools. Fits every tablet press and deduster installation. High throughput owing to round equipment design DN50.

Blickle’s synthetic castors have a modern and clear design and feature high-quality surfaces. They are used in a wide range of applications, including medical equipment, transport systems, kitchen equipment and designer furniture. The smooth surfaces of synthetic castors make them easy to clean, allowing them to meet demanding cleanliness and hygiene requirements. .

Pneumatic piston pump with ratios from 1:2 up to 1:80. The pumps are specially designed for spraying equipment to ensure a long service life and easy maintenance. This enables us to offer an unrivalled low price for spare parts.

Pneumatic diaphgragm pump with ratio 1:1. From 3/8" upt to 2", our standard pumps are specially designed for spraying equipment to ensure a long service life and easy maintenance. This enables us to offer an unrivalled low price for spare parts.

Pneumatic piston pump developed by Jerko. The pump is specially designed for spraying equipment to ensure a long service life and easy maintenance. This enables us to offer an unrivalled low price for spare parts. The necessary pressure to supply the spray equipment is generated by a piston pump developed by Jerko with a transmission ratio of 1:3.

The finum® glass systems are equipped with perfectly matching permanent filters – a simple and elegant solution for individual tea brewing. Each system comes with a hat to prevent heat loss and to serve as drip-off tray after brewing. The double-wall glass keeps your drinks hot longer. Cool Touch: The Hot Glass & Hat is the solution for everyone who wants to keep fingers cool while keeping the drink much longer hot – The double wall insulates hot and cold beverages alike with yet a second effect. No more damaged surfaces through wet vapor-film rings or heatmarks as the double wall keeps them away. No coaster is necessary anymore! Hot Design: Equally equipped with our stylish tea hat it allows you to enjoy your tea individually. The hat serves as a drip off tray for the filter! Highlights double-walled, made from borosilicate (heat resistant) glass lid serves as drip-off tray 200 ml capacity for tea, coffee and spices micro-fine stainless-steel mesh tasteless, BPA free...

eldec brazing systems: automatic induction brazing of pole coils The semi-automatic equipment is designed for manufacturing pole coils of hydro and wind power generators. The machine is based on the experience of the previous manufactured equipments. The machine is designed as a sturdy, high quality and low maintenance machine. The operating is very simple, on automatic mode by 2-hand operation with step by step program and on manual mode by touch-panel.

The particleboard forming line consists of machines for forming and monitoring the particle mat. Additional devices for quality monitoring complete the function of Siempelkamp’s forming line. The plant modules can be adjusted to the respective requirements thus preparing the mat optimally for its compaction in a ContiRoll®. The equipment is designed to produce board thicknesses between 6 and 40 mm without any problem. A typical particle mat former consists of one or two mechanical mat formers for the core layer and two wind sifters for the top and the rear surfaces. The three-layer particleboard thus produced distinguishes by a homogeneous, core layer consisting of coarse particles and two surface layers, the particle size of which is decreasing from the core to the outer faces.

With the procedure ”Mark-on-the-fly”, deployed in the MOF-PROMO HP, all kind of closures, made of most diverse materials, can rapidly be decorated with high precision inside, outside and on the sides. Through the compact design, the user-friendly equipment allows a problem-free integration as inline-variant in existing production lines for closures of all kinds. The laser system is available, depending on the type of application, as MOF-PROMO HP or MOF-PROMO HP 200 Fiber Laser.

As the blue laser handheld 3D scanner of the FreeScan series, FreeScan UE inherits the iconic features of "high accuracy" and "high precision". At the same time ergonomic and lightweight equipment design, make it easier to hold and operate, providing metrologygrade, highaccuracy inspection solutions for the automotive, transportation, aerospace industry, moulding inspection, energy generation, machinery manufacturing and etc.Metrologyclass high accuracy Accuracy up to 0.02mm, Volumetric accuracy 0.02mm+0.04mm/m.Stability of repetitive measurement When measuring the same workpiece repeatedly, FreeScan UE delivers consistent results, proving stability and reliability.

Quick port handling – and therefore the reduction of the time that ships spend in port – is a priority for all port operators, regardless of the port’s size and whether it is at sea or inland. This largely depends on the reliability, robustness, and low maintenance requirements of the handling equipment used. KRÖGER’s different grab systems are ideal for the tough 24-hour working reality of ports and for almost all handling requirements. We are also extremely well equipped to design individualised grabs to meet specific requirements. Depending on the handling system, our grabs are equipped with hydraulic, electro-hydraulic or mechanical rope drives. They can therefore be used to unload small inland ships and large seagoing vessels, as well as for bulk cargo handling of any kind.