Results for
THERMA THERMOFÜHLER GMBH
Germany
Use: Panel insert for thermocouple and RTD circuits. Specially designed to be used together with Hamitherm miniature panel set. Mechanical design: • Thermoset body with original thermocouple material pins and • springloaded inserts. • Polarized pins. • Molded barriers prevent short circuit. • Rugged one body design. • Moulded barriers prevent short-circuits. • Polarity indication next to connection screws.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
The Classic-Line series comprises thermoformed design sheets. Using various tool moulds and surface colours it is possible to match the sheets to the shape and colour of the modular furniture. Whether modern or classic, playful or geometrical, metallic or wood colours - anything is possible. The samples shown simply represent a small selection of what is possible. There are virtually no individual ideas or templates from the metal and wood sectors that cannot be reproduced in plastic.
Request for a quoteSPIROL
Germany
SPIROL offers robust, vertical installation machines specifically designed to post-mould install Compression Limiters into a variety of plastic assemblies. The machines can install a single Compression Limiter or multiple Compression Limiters simultaneously into various polymers, thermoplastics and thermosets. SPIROL’s Compression Limiter Installation Machines are versatile solutions designed to be retooled to accommodate changing part configurations. All designs incorporate standardized machine components to reduce factory lead time, improve component reliability, and lower component costs. SPIROL also specializes in application-specific fixtures to ensure that all assembly components are held accurately in place through the installation process.
Request for a quoteSPIROL
Germany
Heat / Ultrasonic Inserts are designed for post-mould installation in thermoplastics. Heat and ultrasonic installation yield outstanding performance results. SPIROL offers several different series of Heat/Ultrasonic Inserts available in a long and short version of each thread size. Long lengths maximize torque and pull-out resistance, while short lengths are good for less stringent requirements at lower cost and shorter installation times. Some styles are available with or without a head. The head provides bearing surface for the mating component that also prevents jack-out (or when used in reverse, can prevent pull through). However, adding a head results in additional cost raw material of a larger diameter is required to create the head. Some non-headed Inserts are symmetrical – thus eliminating the need to orient the Insert prior to installation.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
The Classic-Line series comprises thermoformed design sheets. Using various tool moulds and surface colours it is possible to match the sheets to the shape and colour of the modular furniture. Whether modern or classic, playful or geometrical, metallic or wood colours - anything is possible. The samples shown simply represent a small selection of what is possible. There are virtually no individual ideas or templates from the metal and wood sectors that cannot be reproduced in plastic.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
The Classic-Line series comprises thermoformed design sheets. Using various tool moulds and surface colours it is possible to match the sheets to the shape and colour of the modular furniture. Whether modern or classic, playful or geometrical, metallic or wood colours - anything is possible. The samples shown simply represent a small selection of what is possible. There are virtually no individual ideas or templates from the metal and wood sectors that cannot be reproduced in plastic.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
The Classic-Line series comprises thermoformed design sheets. Using various tool moulds and surface colours it is possible to match the sheets to the shape and colour of the modular furniture. Whether modern or classic, playful or geometrical, metallic or wood colours - anything is possible. The samples shown simply represent a small selection of what is possible. There are virtually no individual ideas or templates from the metal and wood sectors that cannot be reproduced in plastic.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
The Classic-Line series comprises thermoformed design sheets. Using various tool moulds and surface colours it is possible to match the sheets to the shape and colour of the modular furniture. Whether modern or classic, playful or geometrical, metallic or wood colours - anything is possible. The samples shown simply represent a small selection of what is possible. There are virtually no individual ideas or templates from the metal and wood sectors that cannot be reproduced in plastic.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
The Classic-Line series comprises thermoformed design sheets. Using various tool moulds and surface colours it is possible to match the sheets to the shape and colour of the modular furniture. Whether modern or classic, playful or geometrical, metallic or wood colours - anything is possible. The samples shown simply represent a small selection of what is possible. There are virtually no individual ideas or templates from the metal and wood sectors that cannot be reproduced in plastic.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
The Classic-Line series comprises thermoformed design sheets. Using various tool moulds and surface colours it is possible to match the sheets to the shape and colour of the modular furniture. Whether modern or classic, playful or geometrical, metallic or wood colours - anything is possible. The samples shown simply represent a small selection of what is possible. There are virtually no individual ideas or templates from the metal and wood sectors that cannot be reproduced in plastic.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
The Classic-Line series comprises thermoformed design sheets. Using various tool moulds and surface colours it is possible to match the sheets to the shape and colour of the modular furniture. Whether modern or classic, playful or geometrical, metallic or wood colours - anything is possible. The samples shown simply represent a small selection of what is possible. There are virtually no individual ideas or templates from the metal and wood sectors that cannot be reproduced in plastic.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
The Classic-Line series comprises thermoformed design sheets. Using various tool moulds and surface colours it is possible to match the sheets to the shape and colour of the modular furniture. Whether modern or classic, playful or geometrical, metallic or wood colours - anything is possible. The samples shown simply represent a small selection of what is possible. There are virtually no individual ideas or templates from the metal and wood sectors that cannot be reproduced in plastic.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
The Classic-Line series comprises thermoformed design sheets. Using various tool moulds and surface colours it is possible to match the sheets to the shape and colour of the modular furniture. Whether modern or classic, playful or geometrical, metallic or wood colours - anything is possible. The samples shown simply represent a small selection of what is possible. There are virtually no individual ideas or templates from the metal and wood sectors that cannot be reproduced in plastic.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
The Classic-Line series comprises thermoformed design sheets. Using various tool moulds and surface colours it is possible to match the sheets to the shape and colour of the modular furniture. Whether modern or classic, playful or geometrical, metallic or wood colours - anything is possible. The samples shown simply represent a small selection of what is possible. There are virtually no individual ideas or templates from the metal and wood sectors that cannot be reproduced in plastic.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
The Classic-Line series comprises thermoformed design sheets. Using various tool moulds and surface colours it is possible to match the sheets to the shape and colour of the modular furniture. Whether modern or classic, playful or geometrical, metallic or wood colours - anything is possible. The samples shown simply represent a small selection of what is possible. There are virtually no individual ideas or templates from the metal and wood sectors that cannot be reproduced in plastic.
Request for a quoteBIAX - SCHMID & WEZEL GMBH
Germany
The best MB20 that we have ever had. What‘s new? • Higher speed of up to 34,000 rpm for finer, more precise work. • The motor is protected from overloading by an automatic cut-out. • Restart protection provides a high degree of safety. • Prolonged motor life through optimum dust protection. Inexpensive to purchase and maintain. Safe to operate. • Cost-effective universal motor in a sturdy plastic shell. • Automatic cut-out if wear occurs to the carbon brushes • Soft start. • Degree of protection: IP 20, Protection class: II Specifically designed for versatile use in mould making • Constant speed under load. • Uses various quick-change hand pieces for milling, grinding, polishing, brushing and filing. • The machine can be operated standing upright or suspended from a hook.
Request for a quoteZ.I.S. KUNSTSTOFF GMBH
Germany
Cable conduits made of PE-HD with plug-in sleeve Manufactured acc. to DIN 16876 Standard design: Sleeve type: integrally moulded plug-in sleeve (SM) Sealing ring: compression lip sealing ring, type “SX” (inserted in the factory) Sharp end: with plug-in depth marking and chamfer Length: 6 m Colour: black Inner surface: smooth Possible designs: Quality: DIN 16874 Length: 1 m to 6 m Coloured stripes: co-extruded Colour: on request Outer surface: coloured co-extruded or solid dyed Inner surface: inner grooves for reducing the cable pull-in forces Labelling: acc. to customer specifications
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
HEXPOL TPE GMBH
Germany
TPE compounds for plastic closures using the in shell liner moulding process The EPSeal 800 series was developed for PE and PP closures specially designed for the in shell moulding liner technology. The series includes versions for cold fill, pasteurisation and hot fill beverage treatment systems. This series also includes versions with different rheological values to address the special processing requirements of different lining machine types. An assortment of lubricant packages addresses the spectrum of closure and liner profile designs but all lead to a neutral taste and odour sealant whilst remaining consumer friendly and reliable. Download EPSeal Product Guide
Request for a quoteMOTAN-COLORTRONIC GMBH
Germany
GRAVICOLOR doses and mixes up to six materials precisely and with maximum recipe accuracy. These modular gravimetric units are designed for injection, blow moulding and extrusion and provide throughputs up to 2200 kg/h. Independent of recipes, materials, or the operational environment, IntelliBlend analyses all process data achieving the best possible operating point at any time through continuous self-optimisation. Recipe integrity results in excellent and consistent product quality. The GRAVICOLOR series is part of the motan range of products and systems for all stages of management, conditioning and preparation of plastic granules. The design quality, plus the engineering, ensures high performance and reliable operation.
Request for a quoteResults for
Design of moulds - Import exportNumber of results
21 ProductsCountries
Company type