Data design - Import export

DURO our new product line combines years of experience in the AIR products with new high performance materials. The specification process for flammability, toxic gases and smoke density, static and sliding friction and impact has been started. Furthermore, we do not use harmful raw materials such as PVC or halogens FLOORSIL® 2/FCS can still be used with all our new DURO products. For technical data, color, design choices and dimensions please see our technical data sheet here. DUROMAT Datasheet Product Flyer

Constructed with a single layer of advanced structural reinforcement and utilizing the same proven silicone rubber wear surface, Airflex® is the preferred solution for large mixed fleets at some of the most prestigious airline operators worldwide. For technical data, color, design choices and dimensions, please see our technical data sheet here. AIRFLEX GP Datasheet Product Flyer

The robust and lightweight construction of Airfloor® NTF continues to be the SFE selection of choice among the Metzeler products. This two-layer backing material was first introduced in its original form during the mid-1980s. Superior telegraphing resistance, high-wear resistance, ease of installation and maintenance continue to drive demand for Airfloor®, particularly for Airbus OEM requirements. For technical data, color, design choices and dimensions, please see our technical data sheet here. AIRFLOOR Datasheet Product Flyer

Our services for large-scale and commercial customers •Product and fragrance development according to your requirements •Various bottles, closures and cartons to choose from •Marketing service (label, name, design etc.) •Safety data sheets in many languages •Export and sales support within and outside the EU •Information service on transport regulations, safety data sheets, product liability •Attractive gift boxes and individual packaging •Third-party filling and production of feed supplements •Fast and flexible delivery Would you like to create a unique sauna fragrance for your company-clients? We will help you develop your own signature fragrance or adapt an existing fragrance to your needs. Whether you are looking for a new fragrance, label, bottle or you have a question about sales or exports – we are always prepared for your questions and wishes

The Datapaq® Reflow Tracker® temperature profiling system travels through the process, enabling you to monitor wave and reflow soldering, as well as vapor phase, selective soldering and rework stations. Comprised of specifically designed thermocouples, data loggers, protective thermal barriers and Insight software, this system will help you optimize product quality, expedite process setup, increase yields and minimize the need for rework. For more details and specifications, download the Reflow Tracker System brochure. Insight Software for Reflow Tracker available in Basic, Standard and Professional versions Insight software is an easy-to-use analysis package designed by Datapaq to meet the needs of the electronics assembly industry. With a typical reflow soldering profile lasting only six minutes, users don't want to spend additional time analyzing the profile. Insight Software ensures that the user is presented with a detailed analysis immediately and it comes

The dimensionCONTROL TMWI 8302.LC system is suitable for the inline weight inspection of continuous running rubber profiles (tread pattern or sidewalls) for passenger and truck tires. Based on the force measurement principle, the inspection system uses two load cells which measure the deflection of the measurement conveyor. These sensor elements are attached to a massive construction, which ensures a long-term mechanical stability of the system. The measurement conveyor uses precise and balanced aluminum rollers with special surface treatment. This ensures a low deadweight, avoids influence of unbalance and eliminates material sticking. Data obtained from the load cells are processed in the implemented PLC cards which determine the measured weight mathematically.The software included offers a variety of measurement data processing, definition of design profiles, statistical analysis of measured profiles and diagnostic tools.

PolyWorks is a software to process and evaluate optically digitized, three-dimensional data. It is mainly used in the fields of reverse engineering, design, quality assurance, digital manufacturing, rapid prototyping, cultural heritage archiving and medical applications. PolyWorks Metrology Suite PolyWorks|Inspector PolyWorks | Inspector reads, processes, and compares three-dimensional measurement data. On the basis of using direct interfaces to laser scanners, high-resolution 3D point clouds can be imported. PolyWorks Inspector provides the ability to analyze the recorded data or compare it with design data. PolyWorks|Modeler The PolyWorks | Modeler package is suitable for creating uniform polygon models and NURBS surfaces from point clouds with high density. The software provides polygonal modeling for polygonal production applications. The PolyWorks | Modeler covers the applications of surface reconstruction as part of the reverse engineering process. PolyWorks

LFM Modeller With LFM Modeller, users can create intelligent 3D models of existing laser scan data and export the models to a variety of 3D CAD systems, with some few clicks. LFM NetView LFM NetView is a web-based application suitable for engineering and asset management. The application is available either as a standalone application or as a web browser plug-in, allowing free, secure access to huge databases with an unlimited number of scans. LFM Server With LFM Server, users can access and work with pre-registered 3D laser scan data, compare the planned design with existing data, and use CAD packages from AVEVA, Autodesk, Bentley, or Intergraph. LFM Gateway LFM Gateway provides a unique connection to terrestrial 3D scanners. The application can import data from mobile, handheld or airborne laser scanning.

The DATAPAQ MultiPaq21 data logger has up to eight channels (Type T or K), allowing you to collect product and environmental temperatures from up to eight locations at once. Using flexible thermocouple cables, the temperature sensors can be positioned precisely within the product, on the surface or in the air. They can record temperatures without the data logger or its mass influencing the response characteristics of the sensors and thus, the accuracy of the readings. The data logger is designed to withstand the most hostile of food processing applications and is rated to IP67 with special waterproof thermocouple connections protecting against steam, water showers and routine cleaning procedures. The logger will store up to eight profiles before it needs to be downloaded. DATAPAQ temperature profiling systems comprise high-accuracy industrial-strength data loggers, thermocouples, thermal barriers, and analysis software.

Datapaq Furnace Tracker temperature profilers are available for all kinds of thermal processes in the metals, steel, and glass industries. The systems based on the Datapaq DP5 data logger are designed for short and medium duration processes. The portfolio includes a comprehensive range of high-accuracy, industrial-strength DATA LOGGERS with six or 12 measurement channels, various THERMAL BARRIERS that protect the electronics from heavy-duty process conditions, the Datapaq Insight ANALYSIS SOFTWARE, and a selection of fast-response, high-temperature type K or N THERMOCOUPLES. Designed to ensure minimum running costs, DP5 loggers store up to 10 profile runs before download to a PC. The built-in harsh-environment radio transmitter provides real-time data from within the process, speeding up fault-finding and process optimizations. The loggers can be recharged from flat to usable in just five minutes. A full charge via high-speed USB takes only 90 minutes and can provide 20 profile runs.

DATAPAQ Oven Tracker profilers based on the compact DATAPAQ DP5 data logger are designed for short and medium duration coating cure processes and optimized for low ovens. The portfolio includes high-accuracy DATA LOGGERS with six or 12 measurement channels, protective THERMAL BARRIERS, the Datapaq Insight ANALYSIS SOFTWARE, and type K, N, or T THERMOCOUPLES. The DATAPAQ DP5 data loggers have been designed to ensure minimum cost of use. They can store up to 10 profile runs before being returned to the PC for download and detailed analysis. This enables rapid verification of a number of ovens with no wasted time. The powerful built-in & harsh-environment radio transmitter provides real time data from within the process opening a ‘window’ into the process, speeding up fault finding and process optimizations. The loggers can be recharged from flat to usable in just five minutes. A full charge via high-speed USB takes only 90 minutes and can provide 20 profile runs.

M12 Solar Cell Full Cell. Type: Mono PERC Bificial Solar Cell 12 Busbars Grade: A Efficiency: 23.1% / 10.14W Technical data and design Dimensions: 210mm * 210mm ±0.25mm Thickness: 180 ±18µm Front (-): 12*0.1 ±0.05mm busbars (silver), 174 finger grids, interruption-free design, blue anti-reflective coating (silicon nitride), half or third cut design.

M12 Solar Cell Full Cell. Type: Mono PERC Bificial Solar Cell 12 Busbars Grade: A Efficiency: 23.1% / 10.14W Technical data and design Dimensions: 210mm * 210mm ±0.25mm Thickness: 180 ±18µm Front (-): 12*0.1 ±0.05mm busbars (silver), 174 finger grids, interruption-free design, blue anti-reflective coating (silicon nitride), half or third cut design.

M6 Solar Cell Full Type: Mono PERC Bificial Solar Cell 9 Busbars Grade: A Efficiency: 23% / 6.31W Technical data and design Dimensions: 166mm * 166mm ±0.3mm Thickness: 170 ±30µm Front (-): 9*0.1 ±0.01mm busbars (silver), 146 finger grids, interruption-free design, blue anti-reflective coating (silicon nitride).

The GAGE-CHEK 2000 evaluation unit is particularly well suited for positioning tasks on measuring devices and positioning equipment, and for the retrofitting of measuring machines for the capture and transfer of data to a PC. Design Thanks to its rugged industrial design, the GAGE-CHEK 2000 is superbly suited for applications in measuring rooms as well as in harsh production environments. Its slim aluminum housing with integrated power adapter and fanless passive cooling system is exceptionally sturdy and resilient. The unit’s straightforward touchscreen, made of specially hardened glass, supports multitouch gesture control and permits operation with gloves.

Technical data Design Check Valve with threaded connection and with a EPDM coated ball. Connection Thread ¼” … 3″, acc.to ISO 228-1 Mounting position Horizontal, cap above and vertical Pressure range PN10 … PN16, see data sheet Temperatur range 0°C … +80°C Media Non aggressive liquids Material Body: GGG-50, FBE-coated Cap: GGG-50, FBE-coated Ball: Metal, EPDM-coated Seals: EPDM The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice!

Technical data Design Dual plate check valves to be mounted between tow flanges according to EN 1092-1 Type 11 form B – PN10/PN16. Face to face EN 558-1 row 16 Connection DN50 … DN300 Mounting position Pay attention to the flow direction. Preferably mounting into a horizontal runing pipeline. Make sure to install a minimum of 5 x nominal diameter of straight pipeline in front of and behind the dual plate check valve. Do not install the valves directly onto a pump flange. Pressure range PN10 … PN16, see table Temperatur range 0°C … +80°C Media Non aggressive liquids Material Body: GGG-50, FBE-coated Flap: Stainless steel 1.4408 Stem and spring: Stainless steel 1.4401 Seals: EPDM The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice!

Technical data Design Swing-check valve, body and top cover FBE-coated. Face to face EN 558-1 Row 48 Connection Flange DN50 … DN150, PN16 drilled, Flange DN200 … DN300, PN10 drilled. Flanges DN65 – PN16 will be delivered in 4-hole execution! Mounting position In horizontal pipes with above standing top cover, observe to the flow direction! Pressure range PN10 … PN16, see table Temperature range 0°C … +80°C Material Body: GGG-50, FBE-coated Top Cap: GGG-50, FBE-coated Stem: Stainless steel Seat: Bronze Seat seals: • EPDM • NBR The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice!

Technical data Design Dual plate check valves to be mounted between tow flanges according to EN 1092-1 Type 11 form B – PN10/PN16. Face to face EN 558-1 row 16 Connection DN50 … DN300 Mounting position Pay attention to the flow direction. Preferably mounting into a horizontal runing pipeline. Make sure to install a minimum of 5 x nominal diameter of straight pipeline in front of and behind the dual plate check valve. Do not install the valves directly onto a pump flange. Pressure range PN10 … PN16, see data sheet Temperatur range 0°C … +80°C Media Non aggressive liquids Material Body: GGG-50, FBE-coated Flap: Steel, nickle plated Stem and spring: Stainless steel 1.4301 Seals: EPDM The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice!

Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Body Stainless steel 1.4408. Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4401 (316) Stem Stainless steel 1.4404 (316) Function Electric acting Pressure discharge One-sided Voltage 400V 3AC (24V DC, 230V AC on request) Pressure range Please refer to the data sheet Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 2 parts to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquids, drain water, sludge, food etc. (viscous media, pulverised media with fibre particles, plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (AISI 304) Stem Stainless steel 1.4305 (AISI 304) Function Electrical operated Pressure discharge bidirectional Stem Not rising Pressure range Please refer to the data sheet Temperature range • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy-coated (heattreatment 190°C, 20min) Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (304) Stem Stainless steel 1.4305 (304) Function Electric acting Pressure discharge One-sided Voltage 400V 3AC (24V DC, 230V AC on request) Pressure range Please refer to the table Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Refer to the advices on page 8! Body Stainless steel 1.4408 Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4401 (316) Stem Stainless steel 1.4404 (316) Function Pneumatic single acting with spring return, normally closed (NC). Pressure discharge One-sided Pilot pressure 6bar Pilot Media Filtered and dried, slightly oiled air according to ISO 8573 (please refer to the data sheet) Pressure range Please refer to the table Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 Installation Only with vertical upwards actuator The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 2 parts to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquids, drain water, sludge, food etc. (viscous media, pulverised media with fibre particles, plastic granulates, sand or similar media on request). Not suitable for steam. Refer to the advices on page 9 and 11! Body GG-25 (grey cast iron), epoxy coated 120 … 180µm (heattreatment 190°C, 20min) Sealing • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (AISI 304) Stem Stainless steel 1.4305 (AISI 304) Function Pneumatic single acting with spring return, normally closed (NC). Pressure discharge bidirectional Pilot pressure 6bar Pilot Media Filtered and dried, slightly oiled air according to ISO 8573 (please refer to the data sheet) Pressure range Please refer to the table Temperature range • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Refer to the advices on page 8! Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (304) Stem Stainless steel 1.4305 (304) Function Pneumatic single acting with spring return, normally closed (NC). Pressure discharge One-sided Pilot pressure 6bar Pilot Media Filtered and dried, slightly oiled air according to ISO 8573 (please refer to the data sheet) Pressure range Please refer to the data sheet Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 Installation Only with vertical upwards actuator The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Body Stainless steel 1.4408 Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4401 (316) Stem Stainless steel 1.4404 (316) Function Pneumatic double acting Pressure discharge One-sided Pilot pressure 6bar (lower pressure on request) Pilot Media Filtered and dried, slightly oiled air according to ISO 8573 (please refer to the data sheet) Pressure range Please refer to the data sheet Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (304) Stem Stainless steel 1.4305 (304) Function Pneumatic double acting Pressure discharge bidirectional Pilot pressure 6bar (lower pressure on request) Pilot Media Filtered and dried, slightly oiled air according to ISO 8573 (please refer to the data sheet) Pressure range Please refer to the data sheet Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid