Cylinders - Import export

Stop valves for shutting off and locking in the event of an unintentional drop in pressure. Pneumatically unlockable, for direct installation in the cylinder air connection.

Quick exhaust valves made of nickel-plated brass. For quick bleeding of cylinders and systems. On request also fully assembled with hose connections and exhaust air silencer. Available in sizes M5 – 1/2

The VY solenoid valves are robust, reliable and can be installed in a variety of ways. Installation in-line, on the wall, on modules, as a battery or directly on cylinders is possible without any problems. Available sizes between 1/8, 1/4 and 1/2 in 3/2, 5/2 and 5/3.

Solenoid valves for direct mounting on the pneumatic actuator or cylinder. Cylinder and valve become a compact unit thanks to simple installation in the air connection. Available in sizes 1/8 and 1/4 and with all common solenoid voltages. With manual override.

Pneumatic cylinder RI with a closed oil circuit system to regulate the travel speed when retracting and/or extending. Also with skip and stop function.

The stopper cylinders are developed to stop or block moving parts, e.g. in an assembly line. The large dimensioned piston rod also allows use as a stand-by stop device.

Guide units for attaching cylinders according to ISO 6432 and VDMA 15552. For moving heavy loads with high speed and positioning accuracy.

The compact, guided cylinder CC is a linear drive with a lot of power and minimal dimensions. Generously dimensioned guide rods on plain bearings or ball bearings open up a wide range of application options in variable positioning with and without sensor queries.

The compact, guided cylinder CC is a linear drive with a lot of power and minimal dimensions. Generously dimensioned guide rods on plain bearings or ball bearings open up a wide range of application options in variable positioning with and without sensor queries.

The mini cylinders of the CH series are cylinders with extremely reduced dimensions. For space-saving screwing, also with O-ring seals, in shaped holes or for panel mounting.

Sensors and proximity switches for pneumatic cylinders according to ISO 6432 and ISO 15552.

Fastening elements, bearings and add-on elements for pneumatic cylinders according to ISO 6432 and ISO 15552.

Rodless linear drives allow stroke lengths of up to 6000 mm with a reduced overall length. Stable guidance and durable sealing system even at high speeds and temperatures.

The CD short-stroke cylinders have been developed to ensure high performance in a very small space. Sensors can be integrated in the cylinder housing. Available versions: single / double acting or with through piston rod.

Thanks to their compact but stable design, the CM compact cylinders are particularly suitable for use in small spaces. Diameter range between 20 and 63 mm. Also with anti-twist device.

Great thrust and small installation space. CP cylinder diameter 125 - 200 mm in a compact but robust design.

The CQ series cylinders are manufactured according to ISO 15552 and have diameters between 160 and 250 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available.

The new generation of our pneumatic cylinders according to ISO 15552. Light and robust thanks to innovative design and high-quality materials. An aluminum piston with wear protection, reinforced bronze guides and our MF5 multifunction system with improved damping, centering and sealing ensure maximum reliability even under extreme conditions.

Pneumatic standard cylinder according to DIN / ISO 6432. Available in diameters between 8 and 25 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available.

Series of cylinders entirely in stainless steel. Ideal for applications in the food industry and aggressive environments. Available in three sizes 16-20-25 mm.

Our new generation of particularly robust pneumatic cylinders with tie rods.

Cylinder with double piston rod as anti-rotation device against linear movement of the piston rod. Design based on ISO standard. Available sizes diameter: 32, 40, 50, 63, 80, 100 mm.

Double-acting special cylinders with a customer-specific base flange, pre-assembled with fork mounts with flexible rubber bellows over the piston rod to protect against coarse dirt and aggressive environments. Specially designed for use in commercial vehicles or agricultural machinery.

Complete cylinders: they consists of a base body covered with aluminum or laminated wood spiked lags. These rollers are used to open or tear fibers as well as recoil and draw rollers in feeders.

Application The BDW is designed to reface the seating provided in the engine block for receiving the flange of the cylinder liner. Capacity Refacing diameter range 90-180mm Features Centering in the cylinder bore is automatically effected by simply turning the centering spindle. The studs at the engine block are used for rigidly clamping the BDW to the engine block. The seating is refaced to the preset depth by the simultaneous application of both a rotary and a transverse feed motion to the single point cutting tool. While the single point carbide cutting is rotated around the seating, a feed gear mechanism ensures a transverse feed motion. An adjustable depht stop makes sure that all seatings are cut to the same depth.

Application The K2000 cylinder head stand is designed to support automotive and motorcycle cylinder heads on a workbench so that service or repair jobs, such as valve work or head cleaning and assembly can be easily performed. Features The cylinder head clamped onto the K2000 can be rotated by 360° and may be fixed at any desired angular position. Therefore, assembly and disassembly work can be done with the cylinder head in the most appropriate position. An universal valve spring compressing lever is supplied to remove and install the valve springs.

Application Heavy cylinder heads of large diesel engines can be safely and easily clamped onto the extremely stable WV Cylinder Head Stand to perform maintenance and repair work. If required, the WV can be also used for storing a spare cylinder head. Features The cylinder head mounted on the WV Cylinder Head Stand can be rotated through 360° and locked in any position which is most suitable for the work to be performed. A removeable tray provided in the bottom frame collects any liquid from the cylinder head. Antivibration pads are provided at the bottom frame which are to be secured to the floor so that the stand cannot fall over when mounting and servicing the cylinder head.

Application The HMB Honing Rigs are designed for honing cylinder liners removed from the engine block with the corresponding mobile Hunger PHM Honing Machines. - Honing Rig Type HMB 340 is tailored to the Honing Machine Type HBM 340. - Honing Rig Type HMB 640 is tailored to the Honing Machine Type HBM 640. Features Rigid base structure including upright supporting tubes for mounting the mobile PHM Honing Machine. The liner to be honed is placed on top of a honing liquid reservoir which is slideably mounted on the base structure. The reservoir can be drawn out for ease of loading and unloading of the cylinder liner by means of a crane. An electric pump is provided to supply honing liquid to a spray nozzle. The spray nozzle is mounted on a magnetic base which can be attached to the frame tube to direct the honing liquid to the area to be honed.

Application With the mobile honing machine PHM, the cylinder liners of large diesel engines can be honed in the crankcase when installed. The stationary honing machine base HMB is required for honing removed cylinder liners. An optional comfort control panel including the regulator valves and the manometer gauges can be provided at the lower end of the preassembled drive unit within easy reach of the operator while standing at cylinder liner level. A single central air treatment unit with air filter and lubricator is also provided for trouble free operation. Automatic stroking is available as a option. The stroking lenght can be adjusted by means of end stops.