Cutting-off - Import export

The new EWS tcJet range Optimal chip transport thanks to EWS tcJet EWS tcJet transports the coolant through the inset directly to the cutter and guarantees optimal chip transport... At the same time, the cutting edges have a significantly longer service life. EWS's interior cooling version is available for normal and high-pressure applications for various tool holder fixtures and cutting insert manufacturers.

Hydraulic Grinders and Cut-off Saws

The innovative precision-volume-dispenser eco-PEN700 made by ViscoTec offers a wide range of applications for low to medium-viscosity dispensing. preeflow® eco-PEN is a rotating and perfectly pressure-tight displacement system. Self-sealing rotor/stator design. Conveyance action by medium displacement in the stator through controlled rotor rotation. Safe conveyance without any modification of the medium. With its suck back option, preeflow® ensures clean and controlled material or medium cut-off while preventing post-dripping effects.

Flexible Intermediate Bulk Container (FIBC) of the product range Quintainer® offer and efficient way of utilization of room space and an excellent stability during transportation and storage of bulk goods. Forming diagonally and crossed placed cut-off walls increase the stability of Quintainer® considerably. The higher form stability in comparison to the conventional container for bulk goods ensures a better utilization of room space while transport and storage. Quintainer®-FIBC are available for various types of pallets. Fields of application: Packaging of fine-grained and flowable powder of the chemical industry and granules of the synthetic and food industry. Main industries: Products for the agriculture industry, construction industry, chemicals, pharmaceuticals, terrestrial and garden products, wood products and synthetic material, food, disposal of waste, cleaning agents

Fully automatic operation cutting of aluminium and non-ferrous metal NC Control with touch screen display 5,7” Piece counter showing target/actual number of pieces Piece multiplier when cutting bundles Indication of cycle time Multiple feed device – max feed 3.250mm Table separation before the saw blade retracts so the profile is not touched by the saw blade Electronic material feeder, ball screw spindle and servo motor incl. pneumatic horizontal and vertical clamps Float mounting feeder to balance bend profiles Waste piece from 85mm Reducer of clamping pressure horizontal and vertical Cycle spray mist device with level indicator and automatic stop Cut-off length from 3mm Automatic cut-out when bar is finished Technical Data: Motor up to 18,5kW, S 6 40%, 400 V, 50 Hz, 2850 R.P.M. r.p.m. infinitely adjustable Saw blade speed 3.500 – 5.800 R.P.M Saw blade Ø 400mm Profile width max 200mm height max 120mm

• For smooth cutting off of plastic moulded parts or soft materials such as lead • Cutting edge without side face • With adjustable cutting edge stop by means of adjustment screw (only model 133FG) • With opening spring • Handles coated with plastic • Made of special tool steel, forged, oil-hardened

• For smooth cutting off of plastic moulded parts or soft materials such as lead • Cutting edge without side face • With adjustable cutting edge stop by means of adjustment screw (only model 133FG) • With opening spring • Handles coated with plastic • Made of special tool steel, forged, oil-hardened

• For smooth cutting off of plastic moulded parts or soft materials such as lead • Cutting edge without side face • With adjustable cutting edge stop by means of adjustment screw (only model 133FG) • With opening spring • Handles coated with plastic • Made of special tool steel, forged, oil-hardened

* Loss-in-weight FiberXpert feeder for long and uneven fibers (natural fibers, wood fibers, carbon fibers, etc.)* Also suitable for film chips and shredded film strips cut off by film edge trimmers * Technical features: special fiber screw, large steep walled hopper, novel design and special position of the stirring agitator in the hopper * High-tech weighing system with digital load cell or * high-resolution strain gauge load cell for high weighing accuracy Power range 200-19900 dm³/h

• For short, straight and figure cuts, large radii • Special cutting geometry and precision cutting for a clean cut without any burrs • Cutting edge hardness 60-62 HRC • Micro-serrated cutting edge prevents slipping off during cutting • Re-adjustable screw-joint • With optimum leverage for easy and effortless work • With opening spring and catch • Handles made of solid rolled steel • Ergonomically multi-component safety handle for better handling • Made of tool steel, forged, oil-hardened

• For short, straight and figure cuts, small radii • Special cutting geometry and precision cutting for a clean cut without any burrs • Cutting edge hardness 60-62 HRC • Micro-serrated cutting edge prevents slipping off during cutting • Re-adjustable screw-joint • With optimum leverage for easy and effortless work • With opening spring and catch • Handles made of solid rolled steel • Ergonomically multi-component safety handle for better handling • Made of tool steel, forged, oil-hardened

The small, light-weight cutting machine for workshops. 1-phase drive, 1.2 kW. For hydraulic hoses up to 1”. Quality steel blade •Long lasting German quality steel blades, lowering the cost of ownership Compact design •Ideal for a mobile service CE compliant •Brake motor for safety •Security shield

Full power in any position The universal machines from BEHRINGER can handle any job that is needed. Perfect to slicing through sectional steel as well as solids in metal and comparable plastics at almost any optional angle. With precise cuts, individually adjustable for bidirectional mitre cuts between 90° and 45°, and optionally even for acute angles of 30°. Semi-automatic variants In the BEHRINGER semi-automatic models, the material is positioned by eye, for instance with the aid of a linelaser. This procedure is recommended for frequently changing cut-off length and when the sections are marked on the material already. Automation Where larger cut-off lengths are required, we recommend the use of a measurement device for precise positioning of the material. Used in conjunction with infeed and outfeed peripheral devices such as roller conveyors and transverse transport devices, the degree of automation can be increased to achieve added streamlining effects.

The flexible PC-controlled high-performance circular sawing system PSU 450 A is designed for the utmost cost-effective production of small and large quantity runs. • The PSU 450 A features up to three servo-motorized axis to ensure a precise positioning with regard to length, mitre angle setting and output gripper unit • The material to be cut off is held by means of the output gripper unit. After the cut, the cut piece is removed from the working area in axial direction and put at a defined place. • Extraordinarily short cycle times due to the hydraulicallycontrolled saw stroke • A standard feature in the saw is an innovative, dynamic saw drive technology that ensures premium cutting results.

Metzner has developed the mandrel cutting machines of the SR series for cutting off sealing rings from injection-moulded or extruded tubes with different diameters. These machines are characterised by their unique processing method and high cutting quality. First, pre-extended "rubber tubes" are clamped onto mandrels. Due to the special design of the mandrels, the mandrel can be set up and removed quickly and without special previous knowledge. The mandrels are then automatically clamped in the machine between rotating spindles and production is started. A knife carriage travels along the tubes and cuts the flat sealing rings to the desired length with either push-fit or circular knives, depending on the requirements. This cutting method is particularly impressive with its high cutting quality in combination with a high output.

Your foil and processing requirements determine our knife design. Regardless of whether the foil should be impermeable or permeable, vacuumable or sealable, tearable or much more, they will be cut reliably with the best possible knife.

Biofilms consist of a wide variety of raw materials or combinations of raw materials. They have very specific material properties. Knives need to be matched to these properties to produce cuts, serrated cuts, tabs, tear-off aids, etc. And all that with the reliability and speed that produces organic and economical joy.

Biofilms consist of a wide variety of raw materials or combinations of raw materials. They have very specific material properties. Knives need to be matched to these properties to produce cuts, serrated cuts, tabs, tear-off aids, etc. And all that with the reliability and speed that produces organic and economical joy.

Biofilms consist of a wide variety of raw materials or combinations of raw materials. They have very specific material properties. Knives need to be matched to these properties to produce cuts, serrated cuts, tabs, tear-off aids, etc. And all that with the reliability and speed that produces organic and economical joy.

Biofilms consist of a wide variety of raw materials or combinations of raw materials. They have very specific material properties. Knives need to be matched to these properties to produce cuts, serrated cuts, tabs, tear-off aids, etc. And all that with the reliability and speed that produces organic and economical joy.

Biofilms consist of a wide variety of raw materials or combinations of raw materials. They have very specific material properties. Knives need to be matched to these properties to produce cuts, serrated cuts, tabs, tear-off aids, etc. And all that with the reliability and speed that produces organic and economical joy.

Biofilms consist of a wide variety of raw materials or combinations of raw materials. They have very specific material properties. Knives need to be matched to these properties to produce cuts, serrated cuts, tabs, tear-off aids, etc. And all that with the reliability and speed that produces organic and economical joy.

The Bumotec s1000 C horizontal transfer machine was designed to manufacture prismatic parts from round or profiled bar stock. Small and complex components can be efficiently machined in medium to large batch sizes. The machine is configured with seven 4axis machining stations, each equipped with 4 machining spindles (2 horizontal and 2 vertical). The eight stations comprise a 4axis cut off station with a single spindle. An optional ninth station allows the component to be reclamped to allow the sixth side of the component to be machined with an additional 3axis, 3 or 4 spindle machining unit. The machine is equipped with an automatic bar feed and quick change tool clamping system for optimum production rates. Features 9 machining stations Up to 36 tools integrated into the machine

Robust case either in seawater resistant aluminum or in stainless steel - shaft in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - integral counter for the acquisition of revolutions, with non - volatile storage - optional potting against water jets (IP 69K) - electrical connections via lead exit (with connector for testing). Note: The device restores the position value in case the supply voltage is cut off, provided that the shaft is not deflected by more than ± 90° during the interruption of the supply voltage.

Robust case either in seawater resistant aluminum or in stainless steel - shaft in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - integral counter for the acquisition of revolutions, with non - volatile storage - optional potting against water jets (IP 69K) - electrical connections via lead exit (with connector for testing). Note: The device restores the position value in case the supply voltage is cut off, provided that the shaft is not deflected by more than ± 90° during the interruption of the supply voltage.

Robust case either in seawater resistant aluminum or in stainless steel - shaft in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - integral counter for the acquisition of revolutions, with non - volatile storage - optional potting against water jets (IP 69K) - electrical connections via lead exit (with connector for testing). Note: The device restores the position value in case the supply voltage is cut off, provided that the shaft is not deflected by more than ± 90° during the interruption of the supply voltage.

Robust case with wall thickness of 5 mm either in seawater resistant aluminum or in stainless steel - shaft in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - integral counter for the acquisition of revolutions, with non - volatile storage - optional potting against water jets (IP 69K) - electrical connections via round plug or lead exit. Note (TMA, TMN): The device restores the position value in case the supply voltage is cut off, provided that the shaft is not deflected by more than ±90° during the interruption of the supply voltage.

Robust case with wall thickness of 5 mm either in seawater resistant aluminum or in stainless steel - shaft in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - integral counter for the acquisition of revolutions, with non - volatile storage - optional potting against water jets (IP 69K) - electrical connections via round plug or lead exit. Note (TMA, TMN): The device restores the position value in case the supply voltage is cut off, provided that the shaft is not deflected by more than ±90° during the interruption of the supply voltage.

• elevated base to place the butter - makes it easy to cut off the desired portion • speciality: the dish comes with a weight scale (grams)