Cutting oils - Import export

Drop lubrication of cutting tools at machining work on ferrous and non-ferrous metals, for example during drilling, thread cutting, sawing, milling, punching and nibbling Advantages and benefits Reduces friction and required force Permits high continuous load and higher cutting speeds Allows optimal cutting surfaces Extend tool lives through reduction in wear Neutral behaviour toward machine coatings Free of chlorine and heavy metals Low tendency to form oil mist OKS 390 is suitable for use with the OKS Airspray system Also available as spray version OKS 391Apply a sufficient quantity of OKS 390 to the tool or machining point using a brush, drip oiler or oil can. Spray on sufficiently OKS 391 spray. After use OKS 390 can be removed with OKS 2610/OKS 2611 universal cleaner. Caution: Check compatibility before using on non-ferrous metals.

Drop lubrication of cutting tools at machining work on ferrous and non-ferrous metals, for example during drilling, thread cutting, sawing, milling, punching and nibbling Advantages and benefits Reduces friction and required force Permits high continuous load and higher cutting speeds Allows optimal cutting surfaces Extend tool lives through reduction in wear Neutral behaviour toward machine coatings Free of chlorine and heavy metals Low tendency to form oil mist Apply a sufficient quantity of OKS 390 to the tool or machining point using a brush, drip oiler or oil can. Spray on sufficiently OKS 391 spray. After use OKS 390 can be removed with OKS 2610/OKS 2611 universal cleaner. Caution: Check compatibility before using on non-ferrous metals.

INOX Slide and Bed Track Oils INOX Spray Oils INOX Compressor Oils INOX Formwork Oils INOX Cutting Oils INOX Grinding Oils

Quick suctioning immersion pumps equipped with the patented "BRINKMANN's Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions resp. cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. Volumetric delivery up to 280 l/min Delivery head up to 8,5 m Please contact us for delivery quantity

Suction Pumps are self-priming following the initial priming, and operate according to the bypass duct principle. We recommend pump models featuring bronze body elements for pumping water without anticorrosion additives. The dimensions are based on standard specification EN 12157. Impellers: open Fluids: coolants, cooling/cutting oils, fuel oil, water (with anticorrosive additive) Volumetric delivery: up to 52 l/min Delivery head: up to 16 m Please contact us for delivery quantity

Vertical End Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed. All pumps are equipped with double mechanical seal. This pump series is designed for vertical installations next to a tank and for pumping highly air entrained coolant and cutting oils, as they occur in high speed grinding applications. The SBG pumps are equipped with the user-friendly 45 degree flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with G ¼. Volumetric delivery: up to 2250 l/min Delivery head: up to 62 m Please contact us for delivery quantity

Quick suctioning immersion pumps equipped with the patented "BRINKMANN`s Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions resp. cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The STL serie offers a (SAE) flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 200 l/min Delivery head: up to 80 m Please contact us for delivery quantity

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed. All pumps are equipped with a single mechanical seal. Upon request a second mechanical seal is available to allow for dry-running (-GD). This pump series is designed for horizontal installations next to a tank and for pumping air entrained coolant fluids, such as water-soluble coolants or cutting oils, as they occur in high speed turning, milling or grinding applications. The SBA pumps are equipped with the user-friendly (SAE) flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with G 1/4. Volumetric delivery: up to 2200 l/min Delivery head: up to 62 m Please contact us for delivery quantity.

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are self-priming after initial filling. All pumps are equipped with a single mechanical seal. SBM Pumps are mounted next to or on top of the tank and they are suitable for pumping air entrained coolant fluids, such as water-soluble coolants or cutting oils, as they occur in high speed turning, milling or grinding applications. Volumetric delivery: up to 440 l/min Delivery head: up to 20 m Please contact us for delivery quantity.

Quick suctioning immersion pumps equipped with the patented "BRINKMANN`s Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions resp. cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The SAL serie offers a (SAE) flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 2600 l/min Delivery head: up to 115 m Please contact us for delivery quantity

Our mobile ultra fine filter system M 110 is a processing machine for oils with coarse impurities such as swarf and suspended solids. Equipped with a washable pre-filter, coarse impurities are kept away from the main filter which significantly increases its life service once again. It is constructed very robust and is easy to operate. The vacuum display on the pre-filter enables an unattended continuous operation after switching on. An automatic pressure control and shutdown are also standard equipment of the M 110. In the processing of cutting oils for example, it stands for extremely short amortization times. 230 V-alternative 400 V motor, robust and reliable, stable gear pump Manometer for flow- and element control and for vacuum display in the pre-filter Pressure switch for selection setting in unattended operation 24/7 – unattended operation Pumping without filtration (transfer) Flow regulation for high viscosity oils Element lifter for simple and fast element exchange

Our M 1411 is the ideal machine for processing expensive cutting oils with swarf contamination. It has a pre-filter housing with a metallic screen cylinder and a three-way polypropylene pre-filter. These two pre-filter units work together for retention of coarse impurities such as swarf or larger sand grains. The pre-filter can be used several times. This significantly extends the service life of our filter elements once again, which is already very long. This system is also constructed very solidly, easy to operate, and completes its tasks without supervision. 400 V-asynchronous motor, 0.55 kW, robust construction Stable gear pump, 14 liter/minute Manometer for flow- and element control Robust design, very loadable 24/7 – unattended operation Transfer-circuit Pre-filter selectable from 5 µm – 800 µm Pre-filter can be used several times Also suitable for high viscosity oils 2.50 m flow-/return hose

The system RS 6000 is a high-performing recycling system that cleans large oil volumes in several process stages. This system was constructed for many years of reliable work without service. By several process steps such as heating and settling, large amounts of water and dirt are removed. Additionally, the usage of settling technology and a pre-filter increases the service life of the main filter. The RS 6000 can be operated manually, semi- automatic, and fully automatic. It is the ideal recycling system for central treatment of, for example, cutting oil or cooling lubricants. 400 V asynchronous-motor Robust, stable gear pump Free choice of settling- and heating times and the number of filter passes Either manual, semi-automatic, or fully automatic operation Displays for operation- and process status Flow regulation for high viscosity oils Element lifter for fast filter exchange

For cutting oils with a viscosity up to 100 cSt. Mobile, integrated 60 l tank, stepless adjustable pressure, metering device for cleaning agent, water shortage control, overheat fuse. Volume 2,4 l/m. 10 KW, 16A. 5 m hose with large pistol, hand screw coupling and lance SR-LA 600. Hose with quick change couplings at the device.

Filter Platform concept for cleaning of coolant emulsions and cutting oils for machine tools, such as grinding, honing, machining and turning centres.