Cutter head - Import export

Plastic cases sturdily designed for all-around protection of high-quality milling cutter heads Extremely strong blown double-wall case Secure center fixing screw offers high protection of cutter edge Centering points on base and cover for secure stacking

• Cutting edges inductively hardened • With replaceable, screwed cutter head • Re-adjustable screw-joint • Tremendous cutting performance thanks to optimum leverage • Handles made of precision steel tube • Jaws made of chrome-vanadium steel, forged

Ideal for trimming and scoring hidden airbag compartments on thermoformed skin. After the fabrication of IP skins through thermoforming, two separate fabrication steps are still needed before foaming. In the first step, the thermoformed skin will be trimmed in the external zone through punching or a blade cutting process. Depending on the requirements, this is where FRIMO's blade cutting equipment comes into operation. In the second step, the skin will be weakened in the airbag area by a blade. By using the new FRIMO FlexTrim Combi Trim Scoring machine, both steps can be realised at once. The skin is positioned in a common component fixture and finished with two different cutting tools. The new system concept, with its flexible design and layout possibilities, offers a variety of options for combinable process and operation groupings. As an example : one 2-station system with two robots, which are equipped with automatically exchangeable cutter heads, and where two different products

The SMA 30-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 8 mm is possible in NE metals and a chamfer width of up to 6mm in steel. In addition to this, a radius processing of 1.2mm to 6mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The electrical design of the SMA 30 is equipped with a speed control and should be preferably used for stainless steel processing. The cutter heads are available for chamfer angles 30°, 45° and 60°. The processing of drill holes is already possible starting at a diameter of >28mm. For tight contours, long holes and bores, a single-cutting cutter head with a fitting guide roller is available, Ø10mm to Ø20mm depending on application.

The SMA 60 is available in an electrical, compressed-air or high-frequency design. The machine is designed for handling steel, aluminum, copper and plastics. In NE metals and steel up with a tensile strength of 600N/mm², a chamfer width of up to 30mm is possible. In addition to this, a radius processing of 1.2mm to 15mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The cutter heads are available for chamfer angles between 0 - 80°. The processing of drill holes is already possible starting at a diameter of >28mm. Advantages: Booster technology for a higher material removal rate Spring technology for higher service life of cutting inserts Processing chamfers, radii on sheets, containers, inner and outer edges, contours and drill holes Replaceable cutter head for different chamfer angles 0 - 80° Easy and vibration-free work

The FS 5 is a sturdy and extremely cost-effective chamfering machine with cutter head and cutting inserts. Straight edges of cube-shaped workpieces can be easily chamfered. It is designed for deburring and chamfering small workpieces starting with a thickness of 3 mm. The sturdy casing, the sanded guide rails and the integrated swarf boxes convince in every regard. The V-prism is foldable for changing the reversible cemented carbide inserts. Thanks to the optimised interplay of cutter head and cutting inserts, the machine ensures clatter-free, clean and constant chamfering. The chamfer setting is made through a knurled handwheel. A chamfer width of up to 5 mm is possible in NE metals and a chamfer width of up to 3mm in steel. The machine has a switch-on duration of 10 - 30%/h.

The SMA 40-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 16 mm is possible in NE metals and a chamfer width of up to 12mm in steel. In addition to this, a radius processing of 1.2mm to 8mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The electrical design of the SMA 40 is equipped with a speed control and should be preferably used for stainless steel processing. The cutter heads are available for chamfer angles between 0 - 80°. The processing of drill holes is already possible starting at a diameter of >28mm. For tight contours, long holes and bores, a single-cutting cutter head with a fitting guide roller is available, Ø10mm to Ø20mm depending on application.

The SMA 50-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 20 mm is possible in NE metals and a chamfer width of up to 15mm in steel. In addition to this, a radius processing of 1.2mm to 8mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The cutter heads are available for chamfer angles between 0 - 80°. The processing of drill holes is already possible starting at a diameter of >28mm.

The KKF3-SL, a universal chamfering and contour milling machine, has a measuring head attachment. Tools with a shaft diameter from Ø6-12 mm can be clamped in the milling cutter support. Our versatile tool range includes different VHM milling cutters and blade heads. The VHM milling cutters are available for the processing of chamfer angles and radii. Ball bearings with Ø6 or Ø8mm are used for contour processing with the VHM milling cutters. Tapered contour chamfers are used in combination with optional guide fingers or stop rulers. The use of cutter heads with cutting inserts and guide ball bearings starting at Ø10mm permit maximum efficiency. A guide prism with VHM shaft chamfering can optionally be used for straight edges. The exact chamfer setting is performed through a micrometer screw. A chamfer width of up to 6mm at 45° is possible in steel. In NE metals, significantly larger chamfers are possible depending on the tool and angle.

The KKF4-SL, a universal chamfering and contour milling machine, has an ER collet chuck. Tools with a shaft diameter from Ø6-12 mm can be clamped. Our versatile tool range includes different VHM milling cutters and blade heads. The VHM milling cutters are available for the processing of chamfer angles and radii. Ball bearings with Ø6 or Ø8mm are used for contour processing with the VHM milling cutters. Tapered contour chamfers are used in combination with guide fingers or stop rulers. The use of cutter heads with cutting inserts and guide ball bearings starting at Ø10mm permit maximum efficiency. A guide prism with VHM shaft chamfering can be used for straight edges. The exact chamfer setting is performed through a micrometer screw. A chamfer width of up to 4mm at 45° is possible in steel. In NE metals, significantly larger chamfers are possible depending on the tool and angle. The KKF4-SL has speed regulation that is very useful for the processing of aluminum or stainless steel.

The sturdy chamfering machines are designed for chamfering, edge chamfering and welding seam preparation. The machines can process sheet thicknesses from 2-190mm. The machines generate a very good chamfering quality thanks to the optimized interaction between the cutter head, cutting inserts and minimal quantities of lubrication. In NE metals and steel, a chamfer width up to 30mm is possible. The MMB machines have gradual speed regulation, which is very useful when processing aluminum or stainless steel. The angle adjustment can be set gradually in the range of 30° depending on the machine type and design, for example, 25-55°, 30°-60° or 35-65°. The MMB series is equipped with a feed unit by default. The machines can be extended with roller guide ways or converted into automatic chamfering machines. Depending on the design, the machine table is equipped with ball or heavy-duty rollers.

The sturdy and easy-to-use chamfering machine was designed for the deburring and chamfering of small to medium-sized workpieces and bar material starting with a thickness of 1 mm. The machine generates a very good chamfering quality thanks to the optimized interaction between the cutter head and cutting inserts. In NE metals and steel, a chamfer width up to 11mm is possible. The WKF 170 has gradual speed regulation, which is very useful when processing aluminum or stainless steel. The angle adjustment can cover a range from 15-60° in 5° steps. For longer workpieces or serial part production, we recommend optimizing the feed unit with pressing pressure, surface quality, feed speed and service life of tools. The machine can be installed on an undercarriage for flexible use in a workshop, which simultaneously serves as a chip box. The machine can be extended with roller guide ways or converted into an automatic chamfering machine.

The automatic weld chamfering machine ASO 920 is for portable use in weld seam preparation. The attachment of large welded chamfers on the workpiece upper edge up to a chamfer length of 90mm can be performed by the machine effortlessly without any thermal change to the material, because the heat dissipation occurs through the chip. V, X, K, U or Y seams can be prepared thanks to the gradual angle adjustment from 0° - 30°. The highlight here is the machining preparation of a tulip seam. The machine is very durable and shows its’ strength in every material through their sturdy construction. Extremely high tool service life can be achieved with the low-speed chamfering. Sheet thickness started at 8mm can be processed. Advantages: Easy to adjust to material thickness, chamfer angle and working height Cutter head can be set in Z and X-axis No change to material properties, through heat dissipation via chip V-, X-, K-, U- or Y- seams possible

The sturdy and easy chamfering machine is designed for deburring and chamfering of small to large workpieces from 1 mm thickness. The machine generates a perfect chamfering quality thanks to the optimized interaction between the cutter head and cutting inserts - like sanded. In NE metals and steel, a chamfer width up to 10mm is possible. The ASO160-M is ideal for processing steel and aluminum. The ASO 160-MSL design has speed regulation that is very useful for the processing of aluminum or stainless steel. For longer workpieces or serial part production, we recommend optimizing the feed unit with pressing pressure, surface quality, feed speed and service life of tools. The machine can be installed on an undercarriage for flexible use in a workshop, which simultaneously serves as a chip box.

The automatic recess chamfering machine ASO 910 is for welded seam treatment of, for example, duplex steel. The recess chamfering or resetting of cladding is mastered excellently by the edge chamfering machine. The attachment of chamfers on the top edge of the workpiece is possible up to 65mm. Thanks to the gradual angle adjustment from 90° - 75°, clean transitions are created between two workpieces with different thicknesses. The machine is very durable and shows its’ strength in every material through their sturdy construction. Extremely high tool service life can be achieved with the low-speed chamfering. Sheet thickness started at 8mm can be processed. The front, top and/or bottom side can be processed in one step through a special shape chamfer. Cavities in the front can be chamfered using the disc groove cutter. Advantages: Easy to adjust to material thickness, chamfer angle and working height Cutter head can be set in Z and X-axis No thermal change to the material

The sturdy and easy chamfering machine is designed for deburring and chamfering of small to large workpieces from 5 mm thickness. The hardened and sanded guide rails must be turned for smaller and thinner workpieces starting with a thickness of 2 mm. Thanks to the optimised interplay of cutter head and cutting inserts, the machine ensures clean and constant chamfering. A chamfer width of up to 12 mm is possible in NE metals and a chamfer width of up to 10mm in steel. The cutting edge length of the cutting inserts can be used 100% thanks to the innovative axially adjustable motor shaft. The ASO 650-WSL has speed regulation that is very useful when processing aluminum or stainless steel and a gradual angle adjustment in a range from 15-45°. A radius processing from R1.2 to R6 is possible with different cutting inserts. For longer workpieces or serial part production, we recommend optimizing the feed unit with pressing pressure, surface quality, feed speed and service life of tools.

The sturdy and easy chamfering machine is designed for deburring and chamfering of small to large workpieces from 2 mm thickness. The sturdy cast iron casing, the hardened and sanded guide rails, the speed regulation and the integrated chip box convince in every regard. Thanks to the optimised interplay of cutter head and cutting inserts, the machine ensures clatter-free, clean and constant chamfering. A chamfer width of up to 10 mm is possible in NE metals and a chamfer width of up to 5mm in steel. Hardened workpieces, HSS and hard metal materials can be processed through optional CBN and diamond grinding discs. For longer workpieces or serial part production, we recommend optimizing the feed unit with pressing pressure, surface quality, feed speed and service life of tools. The machine can be installed on an undercarriage for flexible use in a workshop.