Results for
WEBER FOOD TECHNOLOGY GMBH
Germany
The special model ASW 560 for industrial applications offers the latest technology and premium quality: Combine cutting or flattening in conjunction with the Weber automatic initial cut function in one machine. That means that virtually no manual post-processing is required after the processing workflow, even for cheek and very cold material. Can optionally be used with a blade shaft for cutting into the product to be derinded. That leads to an optimal derinding result with a residual rind of less than one percent (temperature dependent) for pork cheek or use with upstream pressure device (roller) instead of the blade roller. Advantages Two work procedures in one machine increase product throughput Almost no more manual post-processing required, even for pork cheeks and highly cooled materials – potential labour savings Options: Operation from left or right Product-specific pressure devices for the derinding process Special sub-frames (height adjustment)
Request for a quote4CR INTERNATIONAL GMBH
Germany
For refining sand scratches and helps signicantly to reduce the amount of time spent on polishing, precise Mineral structures provide a combination of fine cutting and fine finish.
4CR INTERNATIONAL GMBH
Germany
For refining sand scratches and helps signicantly to reduce the amount of time spent on polishing, precise Mineral structures provide a combination of fine cutting and fine finish.
4CR INTERNATIONAL GMBH
Germany
For refining sand scratches and helps signicantly to reduce the amount of time spent on polishing, precise Mineral structures provide a combination of fine cutting and fine finish.
4CR INTERNATIONAL GMBH
Germany
For refining sand scratches and helps signicantly to reduce the amount of time spent on polishing, precise Mineral structures provide a combination of fine cutting and fine finish.
LUDWIG HUNGER WERKZEUG- UND MASCHINENFABRIK GMBH
Germany
Right hand cutting solid reamers with extra long shanks. The front end of these reamers is ground to act as pilot. The cutting edges are precision ground with a gradually increasing relief angle to eliminate chattering and to permit easy and smooth chip formation. The reamers are provided with a hard chromium coating. The very hard chromium coating reduces friction, giving improved chip flow and reducing the tendency for built-up edges.
Request for a quoteLUDWIG HUNGER WERKZEUG- UND MASCHINENFABRIK GMBH
Germany
Right-hand cutting reamers with adjustable blades and with extra long cylindrical shank with square. Cutting edges with the unique Hunger special grinding (progressively increasing clearance angle) ensure a soft and smooth cut. A guide bush, which can be supplied in addition to each reamer size and which is pressed against the valve seat during reaming, facilitates handling and enables optimum accuracy. (see leaflet) The blades of the reamer are made of special steel, which is characterized by particularly good edge retention. In the "hard chrome" version, the blades are also hard chrome-plated. The hard chrome layer is characterized by high hardness and low coefficient of friction. Reamers of the "hard chrome" version are therefore particularly suitable for reaming materials with a high wear effect and materials that tend to stick and form built-up edges.
Request for a quoteLUDWIG HUNGER WERKZEUG- UND MASCHINENFABRIK GMBH
Germany
Right-hand cutting shell reamer with expanding blades. Due to the unique Hunger relief grinding operation the blades have a progressively increasing clearance angle giving a soft cutting action. The reamer fits on a tool bar and may be positioned along the tool bar at any desired position. The reamer is automatically locked in place on the tool bar by an expanding spring coupling as soon as the reamer blades are brought into engagement with the bore. Expanding tool bar guides and supporting fixtures for the tool bar are available to ensure excact alignment of the tool bar when reaming a series of aligned holes. The adjusting nut is marked with annular scale. One graduation of the scale corresponds to a change of the reamer diameter by 0,02 mm. The reamers are available with standard blades made of high quality special steel to ensure superior cutting performance. The reamers are also available with hard chromium coated blades.
Request for a quoteLUDWIG HUNGER WERKZEUG- UND MASCHINENFABRIK GMBH
Germany
Application The universal reamer for all types of holes, particularly for in-line reaming of two or more holes and for reaming very long holes. Description Right-hand cutting reamer with expanding blades. Interchangeable pilots with guide sleeves at the front as well as at the back of the reamer. The guide sleeves provide for exact alignment between the hole being reamed and the other mating holes. A special bayonet coupling with mating cones between each pilot and the reamer body ensures correct alignment. Due to the unique Hunger relief grinding operation the blades have a progressively increasing clearance angle giving a soft cutting action. The adjusting nut is marked with a annular scale. One graduation of the scale corresponds to a change of the reaming diameter by 0,02 mm. The reamers are available with standard blades made of high quality special steel to ensure superior cutting performance. The reamers are also available with hard chromium coated blades.
Request for a quoteLUDWIG HUNGER WERKZEUG- UND MASCHINENFABRIK GMBH
Germany
Application The versatile reamer for reaming longer holes and adjacent mating holes. Description Right-hand cutting reamer with expanding blades. Integral pilot with guide sleeves at the front end of the reamer. The guide sleeve provide for exact alignment between the hole being reamed and the other mating hole. Due to the unique Hunger relief grinding operation the blades have a progressively increasing clearance angle giving a soft cutting action. The adjusting nut is marked with a annular scale. One graduation of the scale corresponds to a change of the reaming diameter by 0,01 mm. The reamers are available with standard blades made of high quality special steel to ensure superior cutting performance. The reamers are also available with hard chromium coated blades. The hard chromium coating has superior hardness in combination with a low friction coefficient.
Request for a quoteLUDWIG HUNGER WERKZEUG- UND MASCHINENFABRIK GMBH
Germany
Application The reamer for reaming longer holes and adjacent holes to be reamed in line with each other. Description Right-hand cutting reamer with extra-long expanding blades. The blades are approximately 2/3 longer than the blades of reamer type D. Due to the unique Hunger relief grinding operation the blades have a progressively increasing clearance angle giving a soft cutting action. The reamers are available with standard blades made of high quality special steel to ensure superior cutting performance. The reamers are also available with hard chromium coated blades. The hard chromium coating has superior hardness in combination with a low friction coefficient. Thus reamers of the "hard chromium" series are particularly suitable for reaming abrasive materials and materials with a tendency to adhere to and to build-up the cutting edge.
Request for a quoteLUDWIG HUNGER WERKZEUG- UND MASCHINENFABRIK GMBH
Germany
Right-hand cutting reamer with expanding blades. Due to the unique Hunger relief grinding operation the blades have a progressively increasing clearance angle giving a soft cutting action. Starting with size D 12 the adjusting nut is marked with an annular scale. One graduation of the scale corresponds to a change of the reamer diameter by 0,01 mm. The reamers are available with standard blades made of high quality special steel to ensure superior cutting performance. The reamers are also available with hard chromium coated blades. The hard chromium coating has superior hardness in combination with a low friction coefficient. Thus reamers of the "hard chromium" series are particularly suitable for reaming abrasive materials and materials with a tendency to adhere to and to build-up the cutting edge.
Request for a quoteANT APPLIED NEW TECHNOLOGIES AG
Germany
The linear manipulation system is perfectly suited for detaching complex structures, such as windows, manholes, cut-thoughs and circular sections. With its high flexibility, it can easily adapt to conditions on-site. The simple assembly operation is performed by means of tensioning belts. The system’s adaptation to the internal diameter is possible.
Request for a quoteSTRECKFUSS SYSTEMS GMBH & CO. KG
Germany
TYP C 053 Universal cutter for radial components Description The Streckfuss Device Type C 053 is designed to cut the leads of axial or radial leaded components incl. IC's to required length. Cover plate and cutting tip are drilled with each other, so all leads will be cutted simultaneously. The plates are made of high- quality tool steel hardened to 60 HRC and polished. Components
Request for a quoteSTRECKFUSS SYSTEMS GMBH & CO. KG
Germany
TYP C 055/H Universal cutter for radial components Description The Streckfuss Devices Type C 055 H is designed to cut the leads of axial or radial leaded components incl. IC's to the required length. Cover plate and cutting tip are drilled with each other, so all leads will be cutted simultaneously. The plates are made of high- quality tool steel hardened to 60 HRC and polished. Components
Request for a quoteSTRECKFUSS SYSTEMS GMBH & CO. KG
Germany
TYP C 055/P Universal cutter for radial components Description The Streckfuss Devices Type C 055 P is designed to cut the leads of axial or radial leaded components incl. IC's to the required length. Cover plate and cutting tip are drilled with each other, so all leads will be cutted simultaneously. The plates are made of high- quality tool steel hardened to 60 HRC and polished. Components
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
STRECKFUSS SYSTEMS GMBH & CO. KG
Germany
TYP C 066/HA Cutter for radial taped components Description With the Streckfuss device Type C 066 HA, all taped radial components, which meet the IEC- specification, can be cutted to the desired length. The integrated touch- facility for components eliminates any kind of belt tolerances. Components
Request for a quoteSTRECKFUSS SYSTEMS GMBH & CO. KG
Germany
TYP C 066/MA Cutter for radial taped components Description With the Streckfuss device Type C 066 MA, all taped radial components, which meet the IEC- specification, can be cutted to the desired length. The integrated touch- facility for components eliminates any kind of belt tolerances. Components
Request for a quoteSTRECKFUSS SYSTEMS GMBH & CO. KG
Germany
TYP C 066/MAZ Cutter for radial taped components Description With the Streckfuss device Type C 066 MAZ, all taped radial components, which meet the IEC- specification, can be cutted to the desired length. The integrated touch- facility for components eliminates any kind of belt- tolerances. Components
Request for a quoteLECHMANN ENGINEERING GMBH
Germany
With our saws and profile processing centers, we are able to precisely cut sheet metal and profiles on request. Elumatec DG244 double miter saw for lengths of up to 6000 mm, high-quality cutting of profiles made of aluminium, PVC and light metal alloys. Cutting profiles made of aluminium, PVC and non-ferrous metals with our SBZ-151 5-axis profile machining center from Elumatec.
Request for a quoteZINSER GMBH
Germany
ZINSER GmbH offers you top-class CNC cutting systems that impress with their outstanding quality, reliability and efficiency. Our systems include oxy-fuel, plasma and laser cutting technologies that are optimized for mild steel, stainless steel and aluminum. With customized solutions and innovative technology, our machines are ideal for demanding production requirements. Premium cutting systems 4000 series The ZINSER premium series (models 4025B, 4125B, 4026B, 4126B) stands worldwide for excellent cutting quality and machine reliability. These machines are perfect for oxy-fuel, plasma, laser, bevel cutting as well as drilling and threading. Economical cutting systems 2000 series Our economical models (ZINSER 2315, 2325, 2425, 2426) are powerful and robust. They offer precise cuts and high flexibility for various applications, including simple and bevel cuts and pipe processing.
Request for a quoteZINSER GMBH
Germany
High-precision plasma cutting machines from ZINSER - efficient cutting solutions for all applications ZINSER GmbH offers a wide range of high-precision plasma cutting machines that are known for their outstanding cutting quality and efficiency. Our systems are specially designed to cut mild steel, stainless steel and aluminum with the highest precision. Thanks to the latest technology and a robust design, our plasma cutting systems ensure maximum productivity and reliability in industrial production. ZINSER 4025B / 4125B / 4026B / 4126B These premium plasma cutting machines offer excellent cutting quality and reliability for demanding applications. They are ideal for cutting thick and thin materials and are suitable for both simple and complex cutting tasks. ZINSER 2315 / 2325 / 2425 / 2426 Our economical plasma cutting machines offer a cost-effective solution without compromising on quality.
Request for a quoteJUMBO-TEXTIL GMBH & CO. KG
Germany
Item No.: 685072 Laser-cut cutting Specification Laser-cut cutting Laser-cut cutting, woven elastic, flame-retardant finish Model type: C (Customised) Dimensions: approx. 110 x 40 mm Material: Polyester Colour: black Property: elastic Packaging: loose in cardboard box Note Features: Laser-cut cutting, with position and stitching markers, flame-retardant finish
Request for a quoteJUMBO-TEXTIL GMBH & CO. KG
Germany
Item No.: 685633 Laser-cut cutting Specification Laser-cut cutting Laser-cut contoured cut Model type: C (Customised) Dimensions: approx. 550 x 210 mm Material: Polyester Colour: black Property: non-elastic Packaging: loose in cardboard box Note Features: Laser-cut contoured cutting
Request for a quoteBILLI DICHTUNGSTECHNIK GMBH
Germany
The function of gaskets is to prevent the leakage of medium outside the equipment. Static seals are used in many applications such as plumbing and heating systems, sealing fasteners, containers and pipeline construction. They are washers, rings or frames which generally are adapted to the whole width of the sealing surface. They can be used for example in flange connections of pipelines, pumps, motors, valves, etc. The gaskets are made of various materials such as: Rubbers, fiber plates, synthetic plates, graphite, PTFE, etc.
Request for a quoteMETO INTERNATIONAL GMBH
Germany
Relax cuts ensure optimum adhesion on curved surfaces.
Request for a quoteSCHULZ STANZTECHNIK GMBH
Germany
Laser cutting parts and bending parts: Your special production in good hands. As part of the Schulz Group, Schulz Stanztechnik can also offer you – as a service and in addition to the stamping program – special laser cut parts in various materials and thicknesses. In accordance with your drawings, you will receive a meaningful offer from us within three working days, and your laser parts within ten working days of your order. Manufacture of 2D and 3D laser parts made of the most diverse of materials as well as angles in accordance with your drawings and specifications.
Request for a quoteKW HYDRAULIK GMBH
Germany
Cable cutting unit in several sizes for cutting cables, in case of failure under voltage.
Request for a quoteResults for
Cuts - Import exportNumber of results
217 ProductsCountries
Company type
Category